Thought I'd try something new as not seen one and got bet I couldn't get it to fit. I'd welcome people's thought's good and bad!

 

I'm impressed would never have done this myself as I'd imagine that the v6 would be a heavy old lump in the front of a fiesta but hats off to you,it looks good and you've made it neat and looks like your doing a proper job

But this is passionford!! We love pics and some more details

 

Cheers dude, tbh it's actually not that heavy as it's all ally and no air con,power steering pump, rad n battery in boot, zetec is cast and weighs a ton but a populer swap,suprisingly this isnt much heavier,just have to uprate everything,widened track by 280mm ,vectra gsi coil overs,modded to fit with sierra top bearing.corsa power steering rack,saxo electric steering box,cosworth front discs, focus st rear discs, hubs,calipers, front top and bottom strut,rear welded strut, ajusting panard rod,rear lowering springs, polly bushed, welded cage,mondeo column and impact brace.full mondeo loom (every single wire ) mondeo clocks, stalks etc,stainless de cat manifolds,modded to miss the rack and cross member, there's better engine choices but this was the challenge presented so I had to go with it. Might go round a corner, might not, who knows lol but it's all part of the fun.

 

Just need the drive shafts making (iv mocked a set up).used to use shelly transmission for my 1 off stuff but must have been 20 years ago so anybody know anywhere just Holla , allso need the rest of the exhaust making so anybody know somewhere in tailoring distance of cannock. Then I can turn the key.i was doing the shitty bits while the weather is bad then ill hit the bodywork n paint it . anyone know an insurance company with a sense of humour? Any modifications? Errrm

 

Cool project. Be good to see it progress.

 

Dave mac prop shafts in Coventry will sort a set of custom driveshafts for you.

 

Exelent, thanks dude, it's been so long since I've messed I don't know anybody anymore. Cheers

 

Hi,
Please feel free to try us for insurance if you like. We look thus type of conversion.
Regards,
Dan.

 

Looks like your going to do a cracking job and can't wait to see it come together. Any idea on a completion date and how long you been building it. Definitely different but then I like that

 

Cheers Dan, it's about 4 months off yet and will be fully checked and an engineers report by Litchfield ford main dealers so thers no problem with registering the charges with dvla, it's just hard to explain to an insurance company, everything has either been modified or fabricated ,it's easier to list what hasn't been modified .windscreen glass and roof skin is original, think that's about it lol

 

Have you anymore pics of the build up so far. We all love pics here

 

Iv been on it for about 7 months, it was a bit rough when I got it so I striped it completely cut every single piece of rust out,new inner n outer Sills,wings, crossmember , front panel. Mint doors, bonnet, boot and completely striped the pain underneath and inside n re painted so a nice base for silly toy.



From the word go this was the engine that had to be used. I know some people will hate it but my wife nagged me saying it will never fit and to scrap it as it was a pile of crap so me being me I couldn't let her have the satisfaction so I'm about 5 n half grand in and got about 3 grand to go but worth every penny to say f you to all the doubters

 

Would be nice on the PassionFord stand @ FordFair..
I'm sure it will get a lot of attention,as it's something not done very much

 

I'll probably go down the remote turbo root as these engines are torque but nothing special, supercharger is not an option as ther is zero room left,I know it's been tried before and failed a few times but I'm different. I'm stubborn, I don't tolerate it can't be done. I hear it as it can't be done easily, but who wants easy, this isn't an off the shelf car and that's what I and hopefully a few others will love. I will get it to the Ford fair show. its just a case of time n money,my wife keeps waisting my money on bills dam her



Wide enough?

 

Lovely project mate, fair play for doin summat different
Shelly transmissions is still in Wolvo mate in same place, I use them for my bits

 

Nice one thanks. I used to work for T.R transmissions back in the day then went on to own Express transmissions doing gearboxes so used to know most of them,wonder if I recognise any old faces there. I've been out of that trade for about 18 years now, don't miss it 1 bit but still love old fords so thought I'd dig out my tools again lol

 

The moment you remember your not a auto electrician and you can't remember where all the wires go lol

 

Can't stipulate enough the importance of correctly fire walling if you put the tank in the boot, fortunately I'm a refractory engineer so I have as much fire proofing as I could ever need. If anyone is ever stuck for fire blanket shout up .



There allso a fire proof black lexan cover going over the back tank and rad to keep the cockpit separate

 

Awesome build, can't wait to see a video of it action once finished.

 

Cheers, should be fun,I'm fireing it up when the exhaust is made so ill film the first turn of the key for fun n post it

 

Going to enjoy this one! Keep the good... GREAT work up!

 

top marks for being different, bet that will shift once done! please keep us updated with your progress

 

Cool project cant beat a mk1 fiesta best looking fiesta ever made imo

 

Thanks. Yeah mk1 is by far the best looking but it's a fine line between tasteful and o.t.t when heavily modding so got to refrain from tacky lol

 

gotta love the quality of work gone into this, look forward to seeing it

 

Thanks. It's nice to see some people understand the level of work ,time, n money involved in a build like this.thers much more to it than sticking the biggest engine you can get to fit in, and it upsets me to see young kids with little or no mechanical engineering background emulating builds like this with potentially dangerous results. Iv been Involved in engineering my whole working life so remember safety first guys

 

Cool project this. The engine looks tight in the bay.

I hope the car wont be nose heavy with that big lump in the front.

 

Tar.they arnt much heavier than a 2.0 zetec. Iv striped everything of that's not needed and weighed it.i built the roll cage myself so weighed every pice and kept it all behind the seats apart from the door bars .no overhead bars as they like to kill people in a crash if no helmet, weighed all firewall steel and rad,tank,battery. E.t.c, widened the track by 280mm, updated suspension, breaks. Duel bias, ajusting shocks,camber bolts,so pretty much done what I can to counter act understeer. when all together and running ill take it to a track for the day for the final ajustments

 

It's tight when you have to dip the oil through the front grill. Chop the cross member apart,reiforce and re assemble so the oil filter and manifold miss.move the steering rack further into the bulkhead 10mm to miss the other manifold. Reiforced and slimed down the chassis rail in the bay.grind n polish the ribs off the gearbox to miss the tie bar e.t.c e.t.c

 

What a cool project mate all credit to you for doing something different. Will be a proper wee weapon when finished.

 

Nice one.i like the pic of your escort. I had a mk4 rs n I miss that car so much,it wasn't the fastest car I've ever driven but it was the hardest I've ever pushed a car to its limits and so much fun,best cornering car I've owned but it was an ex performance centres car so best of everything

 

Thanks mate it was a good car but sadly long gone now I just haven't updated my pic.
A few Rs have come and gone after that one.

 

Productiv day . hybrid fiesta dash to accept mondeo clocks,fiberglass n fill,etch prime ready for flocking, anyone had any success at flocking themselves? Probably make a static charge out of a bug zapper.

 

Dash looks good. Give the flocking a go,you seem to be able to turn your hand to anything so why not

 

looks like an interesting project. whats it going to be used for when finished?
I can sure relate to that statement. my cosworth celica took me 8 years and cost about Ł28G all in so ive heard all those doubters myself but I got there in the end and it was with great pleasure that I proved them all wrong. youll enjoy that first road legal drive all the more when it happens.

 

Iv built a flocking gun now so I'll give it a go,should be fine , I'm going to use the car to generally any the locals of cannock and to continue to give us petrol heads a bad name lol,so just for the blast now and then,I have a nice daily drive and a works van so don't really need it but it's just something to keep me amused and I'm getting to old to keep falling of my motocross bikes as I don't bounce anymore. 28k on a project! Now that's commitment, fair play to you, there's a lot worse you could spend it on

 

Really should spell check lol,anoy the locals

 

The dash looks well.

 

Tar,it's so I don't have to graft wiring looms together as iv used every single wire from the mondeo doner car as I got the fiesta shell with no wiring and thought it was pointless putting a mk1 fiesta harnes in if I was going to get that engine to run

 

Great work mate