My Escort Cosworth...
#1
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![](http://i2.photobucket.com/albums/y50/Adamskilar/cossie/cos4.jpg)
![](http://i2.photobucket.com/albums/y50/Adamskilar/cossie/cos3.jpg)
![](http://i2.photobucket.com/albums/y50/Adamskilar/cossie/cos2.jpg)
![](http://i2.photobucket.com/albums/y50/Adamskilar/cossie/cos1.jpg)
its wicked loving it already just one prob
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
https://passionford.com/forum/viewtopic.php?t=137173
apart from that it ace great car even got 240miles on half a tank!!!! :devil:
cheers Ad
Last edited by adamski frst; 18-12-2010 at 12:52 PM.
Trending Topics
#11
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
sorry aint checked this for a few days
its got 68k on the clock and its basically stage 1-2...
heres the spec....
mongoose
K+N
bailey d/v
T28 hybrid
bigger brakes( frnt and rear got bells too )
305 bhp chip
uprated fuel pump
uprated fuel reg on the way
power graph for 298bhp/320lbft @5890rpm @ power engineering
got a slight running prob atm but trying to solve it as the amal valve was not being used... gonna refit it all for now and gonna fit a boost controller on to it soon...
overall really happy with it going in for some work this week will post a couple of pics back up then
thanks for all the positive replies
Ad
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
heres the spec....
mongoose
K+N
bailey d/v
T28 hybrid
bigger brakes( frnt and rear got bells too )
305 bhp chip
uprated fuel pump
uprated fuel reg on the way
power graph for 298bhp/320lbft @5890rpm @ power engineering
got a slight running prob atm but trying to solve it as the amal valve was not being used... gonna refit it all for now and gonna fit a boost controller on to it soon...
overall really happy with it going in for some work this week will post a couple of pics back up then
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
thanks for all the positive replies
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Ad
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
#15
I've found that life I needed.. It's HERE!!
Join Date: Jul 2004
Location: Cumbria/Preston
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by Series1AJC
whats getting changed at the body shop?
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Whale tail blended in on top of the current one, de-vented bonnet, Ford RS Accessory 13s going on with super high profile tyres....did I cover it all Ad?
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Lucky git
![Wall](https://passionford.com/forum/images/smilies/wall.gif)
#16
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
you homo james!!!
na i got the side lights being painted, delocked all round, blue oval repeaters,clear frnt ind's and a touch up here and there too....
just a bit for now do more when i have some money
na i got the side lights being painted, delocked all round, blue oval repeaters,clear frnt ind's and a touch up here and there too....
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
just a bit for now do more when i have some money
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#18
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
you loser the ind are in the bumper!!!! as i have morette's its therefore legal to have the sidelights painted!!!
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
#19
PassionFord Post Whore!!
iTrader: (1)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Originally Posted by adamski frst
you homo james!!!
na i got the side lights being painted, delocked all round, blue oval repeaters,clear frnt ind's and a touch up here and there too....
just a bit for now do more when i have some money![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
na i got the side lights being painted, delocked all round, blue oval repeaters,clear frnt ind's and a touch up here and there too....
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
just a bit for now do more when i have some money
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#20
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
you may think its devalueing the car??? that is your opinion i want mine delocked for safety, also there was a fine dent on both doors not that visable but i like things perfect so required paint anyway.....
having had my old rs attempted to be nicked i am taking no chances with this.... also i have no care of the resale value as i will never be selling it
i also having it stripped a bit to be fully waxolyed again even tho its wel done already want it to stay as mint as possible
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
having had my old rs attempted to be nicked i am taking no chances with this.... also i have no care of the resale value as i will never be selling it
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
i also having it stripped a bit to be fully waxolyed again even tho its wel done already want it to stay as mint as possible
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#24
Advanced PassionFord User
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
forgot that i haven't kept up the posts on my cossie here so thought i would update for you. since i bought it as mentioned the car went in for a bit of bodywork, dispite what other people think i am happy its delocked
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/delockingdoors2.jpg)
finished pics:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossie6.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossie3.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossie4.jpg)
the car came with some sort of godspeed brake conversion so i am happy with the brakes for now:-
frnt:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/FRONTBRAKES.jpg)
rear:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/REARBRAKES.jpg)
then i decided to take a visit to see a mate of mine how runs a alloy company and they vertually told me i was having a cooling setup
so i couldn't refuse!!!
i got a huge 64mm intercooler and a 50mm rad
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/30536a3f.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/2009d588.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossy14.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/Cossiecooler.jpg)
really happy with it made a noticable difference
then the ruddly alarm decided to go had to have another fitted
also bought some goodies to fit :-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/newbling.jpg)
due to been busy not had time to fit it all yet but got the header on:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/proalloyheader1.jpg)
then after speaking around and general driving i noticed that my car was clearly way too low already having koni's i think the prev owner put the wrong spec springs on. so a call to MR RAINBIRD
and my springs are now ordered off ahmed and should be fitted asap when they arrive
..
i also thought while the suspension was going to come off i may aswell make use so i decided to go out and buy some suspension chrome top mounts, chrome caps, and some poly top mounts... these will all go on when the new springs are put on
...
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/spot2.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/polymountsandchrometops.jpg)
so hopefully the springs will bring the car back to proper cossie height and handling
, future plans for this year include new rims and getting this fitted
maybe some more too
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/autronic2.jpg)
apart from that i'll leave you with the power graph from my cossie was done just before i bought it
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossiepowergraph.jpg)
cheers Ad
![Pthbbbb](https://passionford.com/forum/images/smilies/smile045.gif)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/delockingdoors2.jpg)
finished pics:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossie6.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossie3.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossie4.jpg)
the car came with some sort of godspeed brake conversion so i am happy with the brakes for now:-
frnt:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/FRONTBRAKES.jpg)
rear:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/REARBRAKES.jpg)
then i decided to take a visit to see a mate of mine how runs a alloy company and they vertually told me i was having a cooling setup
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
i got a huge 64mm intercooler and a 50mm rad
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/30536a3f.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/2009d588.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossy14.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/Cossiecooler.jpg)
really happy with it made a noticable difference
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Mad](https://passionford.com/forum/images/smilies/mad.gif)
also bought some goodies to fit :-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/newbling.jpg)
due to been busy not had time to fit it all yet but got the header on:-
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/proalloyheader1.jpg)
then after speaking around and general driving i noticed that my car was clearly way too low already having koni's i think the prev owner put the wrong spec springs on. so a call to MR RAINBIRD
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
i also thought while the suspension was going to come off i may aswell make use so i decided to go out and buy some suspension chrome top mounts, chrome caps, and some poly top mounts... these will all go on when the new springs are put on
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/spot2.jpg)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/polymountsandchrometops.jpg)
so hopefully the springs will bring the car back to proper cossie height and handling
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/autronic2.jpg)
apart from that i'll leave you with the power graph from my cossie was done just before i bought it
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![](https://i2.photobucket.com/albums/y50/Adamskilar/cossie/cossiepowergraph.jpg)
cheers Ad
#30
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Lovely mate, reckon thats a beautiful example of the best RS!
Glad you found a good one, looks like your taking it in the right direction too mate, keep it up!
BTW, I like the look of them once de-locked and agree on the safety side of things too!
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
Glad you found a good one, looks like your taking it in the right direction too mate, keep it up!
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
![Banana](https://passionford.com/forum/images/smilies/banana_dance.gif)
BTW, I like the look of them once de-locked and agree on the safety side of things too!
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Content](https://passionford.com/forum/images/smilies/content.gif)
#35
PassionFord Post Whore!!
Join Date: Aug 2005
Location: .
Posts: 5,831
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
every time I see esc cosworths I want one, had my heart set on a mint series 1 for ages then I see pics like yours and i wanna save a bit more and get the cos
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)
![Smokin](https://passionford.com/forum/images/smilies/icon_smokin.gif)