My Escort Cosworth...
#124
Advanced PassionFord User
Thread Starter
Originally Posted by Paul Ripley
Originally Posted by adamski frst
That is one busy duvet cover :gayflag:
Originally Posted by Paul Ripley
Ads where did you get those duvet covers me and the wife have been looking for some for ages!?
cheers Paul
cheers Paul
#127
Advanced PassionFord User
Thread Starter
my bits have come back from christian now all done, really pleased .....
now to get the inlet off and sort the breather system out and cut the hoses etc
Ad
now to get the inlet off and sort the breather system out and cut the hoses etc
Ad
#132
Advanced PassionFord User
Thread Starter
carl- TOO MUCH
also not pictured i have the new style vernier piper pulleys and carbon bits on the way
also my rocker cover is being painted as we speak
Ad
also not pictured i have the new style vernier piper pulleys and carbon bits on the way
also my rocker cover is being painted as we speak
Ad
#135
10K+ Poster!!
iTrader: (2)
Join Date: May 2004
Location: UK
Posts: 11,383
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by adamski frst
my bits have come back from christian now all done, really pleased .....
now to get the inlet off and sort the breather system out and cut the hoses etc
Ad
now to get the inlet off and sort the breather system out and cut the hoses etc
Ad
Look nice, but then i could of told you that!
#137
Regular Contributor
Join Date: Jun 2006
Location: CREWE, Cheshire
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Looking good, I have made my mind up, gonna get me some of them wheels too, hope you don't think i'm copying or anything but they do look the absolute dogs knackers!!
#150
#1 in Spelling Club
iTrader: (14)
Originally Posted by Mike Rainbird
Originally Posted by Franco
Jesus i should of asked C&B for royalties, every fuckers copying me!!
Glad you are pleased Adam. I know a few have the crackle finish, but there is no doubt it looks awesome.
#151
Caraholic
iTrader: (3)
Originally Posted by Christian and Beccy
Originally Posted by Mike Rainbird
Originally Posted by Franco
Jesus i should of asked C&B for royalties, every fuckers copying me!!
Glad you are pleased Adam. I know a few have the crackle finish, but there is no doubt it looks awesome.
#152
Advanced PassionFord User
Join Date: Oct 2005
Location: in a dream world at present
Posts: 1,880
Likes: 0
Received 0 Likes
on
0 Posts
Looking superb Adam, glad youre finally getting your rocker cover colour coded
Have to agree with PewteRS on the bling but then i would
Any updates????
Have to agree with PewteRS on the bling but then i would
Any updates????
#153
Advanced PassionFord User
Thread Starter
went to pod today if thats news best of the day was a 13.0 @111mph due to 3 bollox starts, was trying to use my launch control but the marshels are in such a rush to get you lined up and go that i didnt really get time for it.... anyway maybe next time i'll give some normal starts not using the launch control. BUT seen as its my first time ever up pod i think i did ok...
(incidently saw another 2 ecossie's running one got a 13.4 the other only ran a 16.5 )
couple of things that wont have helped is it seems my water injection isn't kicking in now i shall need to speak to mark about that. Really need to sort my breather system and few other bits too but for now got alot on so will probably all be done in a major overhaul ....
replace all my new parts in 1 maybe... overall tho i should have run mid 12's today but with a few things tweeked and changed i should think next time i run i should be hoping for regular 12's
(incidently saw another 2 ecossie's running one got a 13.4 the other only ran a 16.5 )
couple of things that wont have helped is it seems my water injection isn't kicking in now i shall need to speak to mark about that. Really need to sort my breather system and few other bits too but for now got alot on so will probably all be done in a major overhaul ....
replace all my new parts in 1 maybe... overall tho i should have run mid 12's today but with a few things tweeked and changed i should think next time i run i should be hoping for regular 12's
#156
Advanced PassionFord User
Thread Starter
cheers mate no i think i did ok but i was just a bit annoyed that they didnt give me enough time to use my launch control .... but my mates said it looked very quick and had i launched right i should have easily been mid 12's ...
as said tho need to overhaul a few things to be up with your spec
as said tho need to overhaul a few things to be up with your spec
#157
Advanced PassionFord User
Thread Starter
ok just thought i'd pop a little update on the car, having driveshaft issues atm for some reason the nearside inner joint keeps going this is my third shaft now .... so i am resorting to the major changes to solve this....
in a month the car will be booked in gonna have the sump removed, my big wing sump fitted with a new bearing and shaft, my breather system fitted, my powdercoated crossmember with adjustable arms and vibratechnic mounts, along with mike R spec coilovers....
So fitting all this should sort my problem also while the front diff is off for the sump i may fit the diff plate i have .... this should put me back working with a nice setup...
the boot is stripped atm too due to spoiler rubbing and is booked in next week for the boot and spoilers to be fixed and resprayed.... my colour coded rocker is fitted , STILL waiting on my carbon BLING after what seems like years!
Next i am considering taking the car off the road in a few months time stripping the underside getting it all done by my mate along with having some seam welding, ADJ top mounts for the front, rear strut brace welded in and some rust sorting .... all in plans just now need to decide what i want done get the top mounts to have steel bosses made to weld on the front. considering having mounts on the back too as my friend offered that too ...
will update with pics soon
Ad
in a month the car will be booked in gonna have the sump removed, my big wing sump fitted with a new bearing and shaft, my breather system fitted, my powdercoated crossmember with adjustable arms and vibratechnic mounts, along with mike R spec coilovers....
So fitting all this should sort my problem also while the front diff is off for the sump i may fit the diff plate i have .... this should put me back working with a nice setup...
the boot is stripped atm too due to spoiler rubbing and is booked in next week for the boot and spoilers to be fixed and resprayed.... my colour coded rocker is fitted , STILL waiting on my carbon BLING after what seems like years!
Next i am considering taking the car off the road in a few months time stripping the underside getting it all done by my mate along with having some seam welding, ADJ top mounts for the front, rear strut brace welded in and some rust sorting .... all in plans just now need to decide what i want done get the top mounts to have steel bosses made to weld on the front. considering having mounts on the back too as my friend offered that too ...
will update with pics soon
Ad