Daz-Tyler

This is my car so far.
Im only 17 and this is my first car so its nothing special
i have a lot of plans 4 this car :
New bonnet (rs with scooby vent at top and bad boyed)
series 2 bumpers (front has centre section cut out)
New alloys
and loads other!
i will get done what i want donw when i get some money because i only get £30 a week at college so its not alot really so it takes me a while 2 get the bits i want!
the bonnet that is on these pics is the ones i done my self and i just put it on but its getting scraped when i get my new one!
hope u enjoy ppl!
cheerz
















iv sprayed a bit more of the interiour such as the speaker pods and the inner sill bits so loks loads better..iv also done the seat subframes which u cant see!

Zetec_mk4_XR3i

Welcome to the forum mate - noticed you were quite new!

Good choice of a car although they are getting harder to find now, that was my first car, a silver 2dr 1.3 Bonus! I absolutely loved it, ended up with a cammed 1.6 cvh in it, slammed on RST rims with 90 spec bumpers and a XR3i interior!

Lookin forward to seein progress on your motor.

Rosco

Fozy

Good luck and take plenty of pics. Will be sorted

Daz-Tyler

cheerz 4 the replys

well i am going 2 put my cars spec so far up later on when i work out everything i have got on it and got 2 do 2 it because i always forget bits!

cheerz for the advice..im planning on dropping a ERST engine in it next year sometime

also about the suspension and the wheel, iv got a full koni ajustable it on it which drops it 30mm also i have got a set of series 2 alloys on but i havent got any side shot pics of my car as it wasnt me who took the pics it was my m8 because i dont have a digi-cam!

will keep yous posted and i will put a spec up later on tonight!

Daz-Tyler

Spec :
15" RS alloys
XR3i spoiler
Koni suspenion all-round
Recaro interiour
Clear lights all-round

To come :
Bonnet inc rs turbo vents and scooby vent at the top and bad-boyed!
RS Turbo bumpers with centre piece cut out on front bumper
all my i.c.e!
Alloys refurbished
Full re-spray in pearl black
Rear quadlight conversion

Probably more when the time comes

Dazzi_S2

not bad mate, am going to do a S1 soon

Cant wait to see it finished

bassy_g

looking fine daz mate,

Daz-Tyler

cheerz 4 the comments!

luke89

iTrader: (1)

looks kool mate me and my bro did the same a mk4 1.3 will get ya some pics if ya want ? every thinks so easy to do on them !! if ya dont mind wats ya pipe sound like and is it 4 a xr3i ? my bro has also chaged the engine to a 1.3 5 speed from a mk4 eclips gose much better now
thanks

Daz-Tyler

cheerz 4 the comment m8.

would apreciate pics plz m8..give me a bit of inspiration 4 my car!

i would love to change mine 2 a 5speed but i havent got the ££££ at the minuite.

also about the pipe!..its a Ashley Sports and its spot on m8! ..preety deep sound ...and its a universal back-box i think m8!
will find out for definate 4 u if u want m8?

...cheerz again!

luke89

iTrader: (1)

yeah mate would be great if ya can find out bout the pipe as it looks kool
there all the pics we got of it so far from start to how it is part from it now has skirts and arches on http://img6.photobucket.com/albums/v...oject%20bonus/
hope they can be of some help if ya need to no any think just pm me and ask and i will c if i can help the 5speed was cheap as we just got the car working but with bad rust for £80 and then droped the engine and gear box and put it in
spec : 1.3 5speed
rst bonnit
16" wheels
-60+ all round on konis
90 spec rst front bumper
peco bak box
clear lends all round
sprayed wing mirrows
sprayed door handles
smoothed all round
over fuleing carb (so flames)

ice: Kenwood Z638 head unit
Alpine MRD-M300 amp
Kenwood KFC-W3085 subs +2
sony fronts
standerd rst rears
(up grading subs and amps soon )
probaly more thats all off the top of my head
thanks

Daz-Tyler

cheerz m8 sweet moto!
gd spec 2!
im very interested in this carb overflow fueling! how do i go about that?
and i would like 2 put a 5 speed box in 2!
how hard r both of them and how do i go about getting them done?

Daz-Tyler

for got 2 say!
tha back box is a universal fit and u can get them from Speed Shack
let me know how u get on with getting one and what u think!
alsoif i got a new rear box mine would b up 4 sale but i did get the box!

luke89

iTrader: (1)

kool thanks ok to get the carb to over full theres 3mm alen key in the center of the carb at the bak turn this right about 2 turns (max) (also at ur own risk as i will not take resposibilty 4 things going wrong ) well put it this way im 15 (today ) and i can do a engine covertion with no exsperace and it works good so i think u should be ok to give it a try if u are just chagin the box u will have to take the engine out so u mite as well just get a new engine lol
do ya have msn ? if so add me lukelavender@hotmail.com
thanks

Deerhunter

iTrader: (2)

daz keep up that good work, what spray did you use ,and any chance of any more pics of the dash, full view of it, reason is you cant get glove box doors any more from ford , and i wanted a mint one, so i thought about painting the scratched one i have, but thought it woulkd look odd, but yours looks cool with the other bits done, MORE PICS IF POSS PLZ

thanks mate

Daz-Tyler

iv done a few more bits so i will b putting them bk in the car this weekend so i will c if i can get a lend of a digi cam of my m8 and i will get a few done for u!
no problem

and for the type of paint i used, i used normal metal paint and primer with LOADS of lacquer on,give it a better finish

hope this helps and good look with yours!

black LS

i'm breakin a 3dr 1.3 popular so if u need anything just ask

luke89

iTrader: (1)

wat pipe ya got ?

black LS

is completly standard, exhaust and a few other bits r practically new. A few bits have gone onto my mates bonus.

Daz-Tyler

erm....dont think i need anything at the minuite!

if i do m8 i will b sure 2 let u know!

Daz-Tyler

just been thinking...is the car standard?
whats its spec plz m8????

also i might be getting some new alloys for it,some 15" fox ones,so my Series 2 ones might be up for sale soon!

black LS

spec is standard 1.3 popular , no front lights, fuel tank, locks think thats all we've robbed so far, interior is in pretty good nick engine has done sumin like 94k and got mot's to prove that from about 1990. zorst was fitted and the car just stood for a year so is pretty much new. don't want much if anything for parts and whats left will just go wiv the car to the scrappy some time next week.

black LS

oh also know of a mk3 1.1 or sumin series one replica with xr3 interior, wheels, and brand new spax suspension for about 100 quid

Daz-Tyler

shame them spax willnt have fitted on mine (even though iv got a koni kit on )

snOOpy86

iTrader: (1)

lookin good dude, if u can find me a link to that exhaust it would be great also how far out of the bumper does it sit?

keep the updates comin good lil project if u wanna chat or help gimme a shout

Daz-Tyler

the distance which the exhaust sits out is ajustable i think but i will find out for defanit for you 2morrow m8.

as for the link,i will have a quick search now for 1 for u m8

NUTS RuS

iTrader: (35)

Keep up the good work Daz £30 a week your doing well so far....

Oh and happy birfday to Luke too... you old git what you got planned for when your 17 them matey ? You should be starting it now

Daz-Tyler

cheerz for the comments ppl


also nuts rus i also think i am doing canny gd for only getting £30 a week!

Daz-Tyler

your link as requested snoopy

http://www.speedshack.co.uk/Escort%20mk3&4.htm

hope this helps u m8?

let me know how u get on!

street

Good work m8! Your doin really well for the budget your on cant be easy, so i'll have a dig round me garage, if i find any bits and bobs worth passin on i'll let you know

street

Daz-Tyler

cheerz m8 that would b excelent that m8

Daz-Tyler

iv bought a new set of alloys 2day!
Max Power Rave's 6 spoke 16"
they finishe the car oss total loads!

p.s:might put my S2 alloys up 4 sale if i get any interest in them

luke89

iTrader: (1)

kool get some pics

Daz-Tyler

will try and get a few pics sorted 2day if i can m8!
doesnt look that gd at the min but will look loads better when my suspension settles!

if any1 would b interested in my old Series 2 alloys p.m me!

Daz-Tyler

pics as i said.....









im going 2 sort the rust out on the arches 2morrow so that will b done and i will give it a gd clean when i get it taxed,M.O.Ted and i pass my test.lol.



comments welcome gd or bad

luke89

iTrader: (1)

them rims look phat just cut the hole arch off and put on some rst 1s and will try get some pics of my bros arch 4 ya to show ya wat i meen are they 16" ? and how much is it droped ? looks much better keep up the good work
thanks luke89

Daz-Tyler

cheerz 4 the comment m8
its droped by -30mm and yes they are 16"

snOOpy86

iTrader: (1)

alright mate might have sum arches and skirts here if ur intrested PM me or catch me on msn.

lookin good mate keep the progress picts comin

snOOpy86

iTrader: (1)

o 1 more thing, take of the centre cap stickers or respray em

Daz-Tyler

cheerz 4 the comments snoopy m8!
ya bro wa ssaying u had some arches and skirts in the shed but as i said 2 him iv just payed 4 them alloys and im what u might call broke now!
i will b buying a set in the near future like so if u still have them when i want a kit i will let u know m8!

also iv just been 2 get all the bits i need 2 sort them arches out so i might do it later on 2day or if not it will be 2morrow morning!

keep the comments comeing,cheerz ppl!