P100 Cosworth build 4x4 (Update 17/4/14!!!)
#82
Advanced PassionFord User
iTrader: (1)
I still aint worked that one out lol . He sold up in Edmonton North London and the money he had left he bought a house with no mortgage .Hes a carpenter so hes doing the house up at the moment but will be looking for work soon bloody good chippy .Whats it like for work up there ?
#84
I've found that life I needed.. It's HERE!!
good bit of work done there
i love how you guys class england as north lol , i know it is north to where you live but its still funny to me
i love how you guys class england as north lol , i know it is north to where you live but its still funny to me
#94
Shark conversions
Join Date: Dec 2009
Location: bucks
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
good shell that matey so have you decided to go 4x4? makes sence when youve got all the bits ready to go.
if you are going to do it properly put the halfmoons in the front chasis legs i no some people say you dont have to but they are there for a reason.and the drivers side of the gearbox tunnel needs doing you will see this when you strip the 4x4.
good work keep it up.
if you are going to do it properly put the halfmoons in the front chasis legs i no some people say you dont have to but they are there for a reason.and the drivers side of the gearbox tunnel needs doing you will see this when you strip the 4x4.
good work keep it up.
#95
Advanced PassionFord User
iTrader: (1)
good shell that matey so have you decided to go 4x4? makes sence when youve got all the bits ready to go.
if you are going to do it properly put the halfmoons in the front chasis legs i no some people say you dont have to but they are there for a reason.and the drivers side of the gearbox tunnel needs doing you will see this when you strip the 4x4.
good work keep it up.
if you are going to do it properly put the halfmoons in the front chasis legs i no some people say you dont have to but they are there for a reason.and the drivers side of the gearbox tunnel needs doing you will see this when you strip the 4x4.
good work keep it up.
#101
I've found that life I needed.. It's HERE!!
as for wheel width i have 8" on mine and there is loads of room i think you could fit the 9.5"
may depend how you do the suspension set up
may depend how you do the suspension set up
#102
Under the car...!
#103
Fart of the Purniture
Looks like an awseome truck that mate!
Will be a great project too
Sorry to be a vulture but........ I'm doing a 24v Saff and I have all the body-kit ready for spraying but I'm on the look out for Saff body-kit in silver - like the doner car you have
Any chance of you parting with any of it???
Will be a great project too
Sorry to be a vulture but........ I'm doing a 24v Saff and I have all the body-kit ready for spraying but I'm on the look out for Saff body-kit in silver - like the doner car you have
Any chance of you parting with any of it???
#104
Advanced PassionFord User
iTrader: (1)
Looks like an awseome truck that mate!
Will be a great project too
Sorry to be a vulture but........ I'm doing a 24v Saff and I have all the body-kit ready for spraying but I'm on the look out for Saff body-kit in silver - like the doner car you have
Any chance of you parting with any of it???
Will be a great project too
Sorry to be a vulture but........ I'm doing a 24v Saff and I have all the body-kit ready for spraying but I'm on the look out for Saff body-kit in silver - like the doner car you have
Any chance of you parting with any of it???
#117
Pick-up P100 Power!
iTrader: (2)
While it's fresh on my mind your have some excess loom. Unplug the rear electric windows from the loom at the centre console that takes care of them. You also have to small looms that run along the doors for the c/l, e/w motors, door open warning and interior light. Either cut them out of the loom or coil them put and hide them. The p100 loom for the rear lights etc runs across the drivers door, I cut mine at the dash but on the saph I believe the rear lights run up either side so your need to take that on board as they will need 're-routing. Only other I notice is that your have no heated front and rear screen.
#118
Advanced PassionFord User
iTrader: (1)
While it's fresh on my mind your have some excess loom. Unplug the rear electric windows from the loom at the centre console that takes care of them. You also have to small looms that run along the doors for the c/l, e/w motors, door open warning and interior light. Either cut them out of the loom or coil them put and hide them. The p100 loom for the rear lights etc runs across the drivers door, I cut mine at the dash but on the saph I believe the rear lights run up either side so your need to take that on board as they will need 're-routing. Only other I notice is that your have no heated front and rear screen.