Restorations, Rebuilds & Projects. Restoring her to Concourse? Just getting her running again? Or got a mad project? This is your room.

3dr cosworth built... Update collected 6degree beam **

Thread Tools
 
Search this Thread
 
Old 27-09-2012, 08:14 PM
  #881  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by ginner
Try mine out next weekend pal see wot u think, there noisey but there worth it

Will do cheers mate... Is the noise bad..?
Old 27-09-2012, 08:18 PM
  #882  
Jay,
Sponsor



iTrader: (4)
 
Jay,'s Avatar
 
Join Date: May 2004
Location: south east
Posts: 25,222
Received 407 Likes on 329 Posts
Default

Originally Posted by ginner
Matt don't bother with quaife there shit, go for a gripper from bara
agreed had both in mine and the gripper was so much better
Old 27-09-2012, 08:37 PM
  #883  
ginner
I've found that life I needed.. It's HERE!!
iTrader: (1)
 
ginner's Avatar
 
Join Date: Dec 2009
Location: newark
Posts: 1,160
Received 10 Likes on 9 Posts
Default

Originally Posted by RS_matt
Will do cheers mate... Is the noise bad..?
Only on slow corners, but I've learnt just to light the fuckers up,aparantly there's to types the old noisyer but better one and the new quieter ones but arnt as good ,
Old 27-09-2012, 09:30 PM
  #884  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Cheers guys
Old 11-10-2012, 04:43 PM
  #885  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by ginner
Try mine out next weekend pal see wot u think, there noisey but there worth it


It's was lovely in the wet sideways mate... Stunning car as well mate....
Old 27-11-2012, 06:23 PM
  #886  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Well had the car out today after fetching it back from ford... Been and swapped my front 215/40/17 for 205/40/17 as the drivers side had caught and scuffled the kit...so went and had that repaired... Then new front and rear badges where fitted with the correct colour blue this time... Then went for a drive in the rain...





Old 27-11-2012, 06:23 PM
  #887  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Oh and I drove it hard in the rain...(ouch)...
Old 27-11-2012, 06:26 PM
  #888  
whizzisat114
PassionFord Post Whore!!
iTrader: (2)
 
whizzisat114's Avatar
 
Join Date: Jan 2010
Location: in someone elses garage
Posts: 5,904
Received 26 Likes on 26 Posts
Default

Looks lovely on the hock's Matt
Old 27-11-2012, 06:34 PM
  #889  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Cheers mate .
Old 27-11-2012, 06:39 PM
  #890  
Mk4 Lew
PassionFord Post Whore!!
iTrader: (1)
 
Mk4 Lew's Avatar
 
Join Date: Aug 2010
Location: Chesterfield Derbyshire
Posts: 7,941
Likes: 0
Received 1 Like on 1 Post
Default

Is that why it wasn't straight at 100?
Old 27-11-2012, 06:43 PM
  #891  
andy888
I've found that life I needed.. It's HERE!!
 
andy888's Avatar
 
Join Date: Oct 2007
Location: ayrshire
Posts: 1,173
Received 28 Likes on 28 Posts
Default

did you find the water leak?
Old 27-11-2012, 06:45 PM
  #892  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by Cossie Lewis
Is that why it wasn't straight at 100?
Yea it was lol..

Originally Posted by andy888
did you find the water leak?

Yes mate it was the core plug.
Old 27-11-2012, 07:09 PM
  #893  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Double post
Old 28-11-2012, 10:22 AM
  #894  
v man
Zee Germans are coming
 
v man's Avatar
 
Join Date: Oct 2006
Location: dunstable beds
Posts: 4,585
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Rsmat
Oh and I drove it hard in the rain...(ouch)...
Fuck me nearly spat my tea over the I pad then

Old 28-11-2012, 03:52 PM
  #895  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by v man
Fuck me nearly spat my tea over the I pad then



And I nearly cried lol.... Spent 5 hours on it today tho...









Old 28-11-2012, 04:10 PM
  #896  
dingla rs
PassionFord Post Whore!!
iTrader: (2)
 
dingla rs's Avatar
 
Join Date: Jun 2009
Location: catterick/sunny yorkshire
Posts: 8,308
Received 25 Likes on 23 Posts
Default

looks great matt when is it going pauls ?
Old 28-11-2012, 04:17 PM
  #897  
maxest
PassionFord Post Whore!!
iTrader: (1)
 
maxest's Avatar
 
Join Date: Jun 2003
Location: Blackpool
Posts: 6,408
Received 18 Likes on 18 Posts
Default

That does look well
Old 28-11-2012, 04:19 PM
  #898  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by dingla rs
looks great matt when is it going pauls ?


Cheers mate.... Your guess is as good as mine... He never got back to me even when I asked again... Thread here..



https://passionford.com/forum/muppet...nt-get-it.html
Old 28-11-2012, 04:19 PM
  #899  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Cheers Max.
Old 28-11-2012, 05:14 PM
  #900  
Staffi
20K+ Super Poster.
iTrader: (1)
 
Staffi's Avatar
 
Join Date: Nov 2005
Location: Don't be nosey
Posts: 21,194
Received 107 Likes on 96 Posts
Default

Hey up mate, now that looks forking lovely mate, best it,s looked Mat, don,t sell it mate, that,s a keeper. Hocks look superb and the AP,s look great too
Old 28-11-2012, 05:26 PM
  #901  
gjh
10K+ Poster!!
 
gjh's Avatar
 
Join Date: May 2010
Location: West Wales
Posts: 12,786
Received 347 Likes on 320 Posts
Default

Stunning as usual Mat.
Old 28-11-2012, 05:37 PM
  #902  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by Staffi
Hey up mate, now that looks forking lovely mate, best it,s looked Mat, don,t sell it mate, that,s a keeper. Hocks look superb and the AP,s look great too
Cheers Pete mate... It's looking so new and fresh I could look at all day on the hock's they have really made the car... Deffo keeping it now mate ...

Originally Posted by gjh
Stunning as usual Mat.

Cheers mate
Old 28-11-2012, 06:05 PM
  #903  
v man
Zee Germans are coming
 
v man's Avatar
 
Join Date: Oct 2006
Location: dunstable beds
Posts: 4,585
Likes: 0
Received 1 Like on 1 Post
Default

I always find to really appreciate how clean a car is it has to get dirty

And your jelly mould is looking very nice mat

IMHO though some bbs split rims would look sick


Do you snow foam the underside as well as the topside
Interested in how you go about it even though that sounds like a silly question
Old 28-11-2012, 06:16 PM
  #904  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by v man
I always find to really appreciate how clean a car is it has to get dirty

And your jelly mould is looking very nice mat

IMHO though some bbs split rims would look sick


Do you snow foam the underside as well as the topside
Interested in how you go about it even though that sounds like a silly question

Cheers mate... I was going to go BBS.... But every man and his dog has them... So I decided Hock's.


Yes mate when I did the underside I heavily waxed it and now all I have to do is snow foam it and then it's all clean... Nice and easy...
Old 28-11-2012, 06:19 PM
  #905  
v man
Zee Germans are coming
 
v man's Avatar
 
Join Date: Oct 2006
Location: dunstable beds
Posts: 4,585
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Rsmat
Cheers mate... I was going to go BBS.... But every man and his dog has them... So I decided Hock's.


Yes mate when I did the underside I heavily waxed it and now all I have to do is snow foam it and then it's all clean... Nice and easy...
Ah cool makes it nice and easy
Do u get under there and dry it off at all

I do love the hocks but I just feel this car needs something a little special if ya get me
That's just my opinion of course
Not putting it down in anyway cos that would be impossible
Old 28-11-2012, 06:30 PM
  #906  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by v man
Ah cool makes it nice and easy
Do u get under there and dry it off at all

I do love the hocks but I just feel this car needs something a little special if ya get me
That's just my opinion of course
Not putting it down in anyway cos that would be impossible

Tbh the Hocks feel more special... The BBS are done to death


No mate I use a leaf blower to dry the entire car in under 5 mins
Old 28-11-2012, 06:37 PM
  #907  
Less.
having a mid life crisis

 
Less.'s Avatar
 
Join Date: Jun 2003
Location: Kent
Posts: 46,642
Received 32 Likes on 30 Posts
Default

Did like the Hocks at first Mat but they have grown on me a stunning example a real credit to you
Old 28-11-2012, 06:37 PM
  #908  
v man
Zee Germans are coming
 
v man's Avatar
 
Join Date: Oct 2006
Location: dunstable beds
Posts: 4,585
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Rsmat
Tbh the Hocks feel more special... The BBS are done to death


No mate I use a leaf blower to dry the entire car in under 5 mins
Can just imagine the neighbours peeping through the curtains with a look on there face as your blowing the car with a leaf blower

Old 28-11-2012, 06:50 PM
  #909  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by Less.
Did like the Hocks at first Mat but they have grown on me a stunning example a real credit to you
Cheers Less mate

Originally Posted by v man
Can just imagine the neighbours peeping through the curtains with a look on there face as your blowing the car with a leaf blower


Yea I've had a few wired looks lol..


But it works lol.
Old 28-11-2012, 07:06 PM
  #910  
shortie
Regular Contributor
 
shortie's Avatar
 
Join Date: May 2011
Location: somewhere
Posts: 250
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello matt as a fellow 3dr cossie owner i've got to say your car is awesome mega respect to ya fella
Old 28-11-2012, 07:13 PM
  #911  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by shortie
Hello matt as a fellow 3dr cossie owner i've got to say your car is awesome mega respect to ya fella


Ah cheers mate... Cracking cars aren't they.?... Love mine had it 2years..
Old 28-11-2012, 09:42 PM
  #912  
mk22door
Fart of the Purniture
 
mk22door's Avatar
 
Join Date: Feb 2011
Location: Yorkshire
Posts: 1,433
Received 41 Likes on 38 Posts
Default

Originally Posted by Rsmat
I have a question about the camber shims if you don't mind?

I know they give a more even tyre wear but do you ever look at your car and think it sits a little odd?

Not just your car but others I have seen photo's of, they look like they have slight positive camber at the rear and of course the car being lowered the front has the look of slight negative.I bought a set years ago and never got around to building up the rear end, I'm not sure about them now, well I haven't been sure for a while.

Then I read a thread somewhere by a greek bloke who had bought some and the toe was all wrong with them fitted too.

What are your thoughts now after having them on for a while?

Otherwise your car is one thousand percent amazing, really nice Sierra
Old 28-11-2012, 10:11 PM
  #913  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by mk22door
I have a question about the camber shims if you don't mind?

I know they give a more even tyre wear but do you ever look at your car and think it sits a little odd?

Not just your car but others I have seen photo's of, they look like they have slight positive camber at the rear and of course the car being lowered the front has the look of slight negative.I bought a set years ago and never got around to building up the rear end, I'm not sure about them now, well I haven't been sure for a while.

Then I read a thread somewhere by a greek bloke who had bought some and the toe was all wrong with them fitted too.

What are your thoughts now after having them on for a while?

Otherwise your car is one thousand percent amazing, really nice Sierra

Well I'm not that clued up on camber and wheels setting tbh.... But one thing I do know is the car has better tread wear and a lot more grip than before and when I had the geometry or tracking they said it was bang on... So from my point of view it's an improvement .

Really hope that helps mate.
Old 28-11-2012, 10:13 PM
  #914  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Also just realised in that pic I'd just dropped the arse end after cleaning the rear arches. So was un settled.
Old 28-11-2012, 11:11 PM
  #915  
mk22door
Fart of the Purniture
 
mk22door's Avatar
 
Join Date: Feb 2011
Location: Yorkshire
Posts: 1,433
Received 41 Likes on 38 Posts
Default

Un-settled suspension - I should have guessed! I made a bad choice of using that photo for an example. Sorry

Yeah, I read earlier in the thread how grip is improved and all that and understand that is the whole point of the wedges, just wondered if you like the look of it, I mean I know tyre wear is shit on a lowered sierra but after all these years of seeing countless photo's in Fast ford / Performance Ford, the forums etc ( I too grew up wanting a Cosworth ) of Sierra's with camber at the rear end - without it they look a little strange if you see what I mean?

I think it's just me - I can't get me head round it! Ignore all this

Thanks for your reply mate.

Once again - A totally awesome Sierra Cosworth

Last edited by mk22door; 28-11-2012 at 11:14 PM.
Old 29-11-2012, 08:32 AM
  #916  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Originally Posted by mk22door
Un-settled suspension - I should have guessed! I made a bad choice of using that photo for an example. Sorry

Yeah, I read earlier in the thread how grip is improved and all that and understand that is the whole point of the wedges, just wondered if you like the look of it, I mean I know tyre wear is shit on a lowered sierra but after all these years of seeing countless photo's in Fast ford / Performance Ford, the forums etc ( I too grew up wanting a Cosworth ) of Sierra's with camber at the rear end - without it they look a little strange if you see what I mean?

I think it's just me - I can't get me head round it! Ignore all this

Thanks for your reply mate.

Once again - A totally awesome Sierra Cosworth

Aye I see what you mean.. And I also love the look of camber on 2wd...but when I'm trying to put 400bhp down they help a lot.

Many thanks and anything I can help you with just ask mate .
Old 29-11-2012, 03:48 PM
  #917  
basty
15000
 
basty's Avatar
 
Join Date: Nov 2007
Location: belgium
Posts: 40
Likes: 0
Received 1 Like on 1 Post
Default

What a car!

nice going!!
Old 29-11-2012, 07:33 PM
  #918  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Well I've done a final clean today.. And a hover out ready for a drive out tomorrow and a few pics..got I'm enjoying just pottering about in it..

Bad luck I had tho was I came to put my TSW little Gell badges on the wheels and guess what I can't find them anywhere
Old 29-11-2012, 08:53 PM
  #919  
Minirotty
Lucifer II - 666
 
Minirotty's Avatar
 
Join Date: Apr 2007
Location: Birmingham
Posts: 8,342
Received 303 Likes on 197 Posts
Default

Lovely car, credit to you!
Old 29-11-2012, 09:14 PM
  #920  
Rsmat
300+

Thread Starter
iTrader: (2)
 
Rsmat's Avatar
 
Join Date: May 2004
Location: either at work or on way :)
Posts: 27,262
Received 585 Likes on 517 Posts
Default

Thanks a lot mate


Quick Reply: 3dr cosworth built... Update collected 6degree beam **



All times are GMT. The time now is 04:37 AM.