When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Launch control is wicked! Mine sits at 4500rpm with 2.6 bar of boost till I take my finger off the button! Get some funny looks at the lights popping and banging then clutch up fast as you can then when im moving its finger off the button and it's good by lol
Launch control is wicked! Mine sits at 4500rpm with 2.6 bar of boost till I take my finger off the button! Get some funny looks at the lights popping and banging then clutch up fast as you till I'm moving then finger off the button and it's good by lol
Launch control... well cool.Matt you will just end up lighting the rear tyres up.
Not with good tyres and diff it won't mine doesn't with nice warm r888's in the dry and I've got 500bhp I think launch control is a really good mod much better than anti lag which is a bit point less on a road car
I fuckin love this car was good to meet you matt and see the car didn't realise you had a dump valve though thought you'd be a chatter kinda guy lol
Thanks mate.
Not by choice mate.. But 36psi a lot of pressure on that shaft...so I put one on... The car came with one from ford with a t3 and 9psi so it's good enough for me to have one... It's there for a reason operational not decorational mate.
Hi Matt , I'm really happy that you desided to keep the 3dr and your going to develop it further deffo good choice with the beam but I wouldn't go with that diff , Titan , gripper or supra would be your best bet . Keep up the good work !
Hi Matt , I'm really happy that you desided to keep the 3dr and your going to develop it further deffo good choice with the beam but I wouldn't go with that diff , Titan , gripper or supra would be your best bet . Keep up the good work !
Cheers mate... That's the type of response I was after john...Someone in the same boat so to speak... I'll get a different diff then mate....
Cheers mate... That's the type of response I was after john...Someone in the same boat so to speak... I'll get a different diff then mate....
I've been using a bara diff with a 250nm viscous and new planet gears , had no problems but never done a really hard launch ! Going for a gripper or a supra diff next
I've been using a bara diff with a 250nm viscous and new planet gears , had no problems but never done a really hard launch ! Going for a gripper or a supra diff next
Not by choice mate.. But 36psi a lot of pressure on that shaft...so I put one on... The car came with one from ford with a t3 and 9psi so it's good enough for me to have one... It's there for a reason operational not decorational mate.
Fair point mate and as I suspected tbh.
Glad you're keeping it though mate and nice to see someone that drives properly lol on that private road we all met on