MRM SpeedShop’s 666 Van.
#561
Lucifer II - 666
Thread Starter
#562
mk6 escort fantasist
![Default](https://passionford.com/forum/images/icons/icon1.gif)
love looking at this van, done a cracking job on her kev![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
im looking at a mk6 van tomorrow with an rs2000 conversion all up running . any idea what i should be paying? providing i find a solid shell
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
im looking at a mk6 van tomorrow with an rs2000 conversion all up running . any idea what i should be paying? providing i find a solid shell
#564
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
That question is so hard to answer mate, as they really are only worth what some one is prepared to pay.
Just be careful looking at it and make sure conversion has been properly, as with most, they are bodged badly.
But don't let that put you off it, just pay less, look at the first pages of this thread, this had an RS engine in it but it fell out lol
I had to strip van down to bare shell and start again, worth it though as they are such a laugh!
And rare, done up RS van, mine tends to stop traffic a lot when I am out in it, love it.
Just be careful looking at it and make sure conversion has been properly, as with most, they are bodged badly.
But don't let that put you off it, just pay less, look at the first pages of this thread, this had an RS engine in it but it fell out lol
I had to strip van down to bare shell and start again, worth it though as they are such a laugh!
And rare, done up RS van, mine tends to stop traffic a lot when I am out in it, love it.
#565
Lucifer II - 666
Thread Starter
#566
Lucifer II - 666
Thread Starter
#567
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Popped to a mates tonight think I am gona add a baffle in the exhaust man, got a head ache tonight and the noise echoing through the rear tub of the van like banging on side of an oil drum, going to ACE CAFE on 3rd, will be wearing ear plugs on route lol
![Name: 3F0EF197-6F65-486C-A1BF-5E60616C79EA-7543-000003BCB9C06E5C_zps1d6eba55.jpg
Views: 201
Size: 103.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/60291d1501383576-mrm-speedshopis-666-van-3f0ef197-6f65-486c-a1bf-5e60616c79ea-7543-000003bcb9c06e5c_zps1d6eba55.jpg)
Last edited by Minirotty; 24-04-2014 at 08:15 PM.
#568
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Added some wheel sticker to break up the white a bit...
![Name: 307354A6-C992-4BD9-A56B-00495DB26649-14890-0000070543B8AD2C_zps5dc0b352.jpg
Views: 236
Size: 155.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/59908d1501382885-mrm-speedshopis-666-van-307354a6-c992-4bd9-a56b-00495db26649-14890-0000070543b8ad2c_zps5dc0b352.jpg)
![Name: 7C101702-CFB9-4F19-887E-29567BB33EF4-14890-000007054D9940A4_zps3810f0ec.jpg
Views: 196
Size: 63.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/59909d1501382885-mrm-speedshopis-666-van-7c101702-cfb9-4f19-887e-29567bb33ef4-14890-000007054d9940a4_zps3810f0ec.jpg)
![Name: 307354A6-C992-4BD9-A56B-00495DB26649-14890-0000070543B8AD2C_zps5dc0b352.jpg
Views: 236
Size: 155.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/59908d1501382885-mrm-speedshopis-666-van-307354a6-c992-4bd9-a56b-00495db26649-14890-0000070543b8ad2c_zps5dc0b352.jpg)
![Name: 7C101702-CFB9-4F19-887E-29567BB33EF4-14890-000007054D9940A4_zps3810f0ec.jpg
Views: 196
Size: 63.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/59909d1501382885-mrm-speedshopis-666-van-7c101702-cfb9-4f19-887e-29567bb33ef4-14890-000007054d9940a4_zps3810f0ec.jpg)
![Name: A47E13C0-230F-41DD-9732-C6196DA96F62-14890-0000070554C6B6EC_zpsa575f64e.jpg
Views: 201
Size: 66.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/59910d1501382885-mrm-speedshopis-666-van-a47e13c0-230f-41dd-9732-c6196da96f62-14890-0000070554c6b6ec_zpsa575f64e.jpg)
#569
Lucifer II - 666
Thread Starter
#571
Lucifer II - 666
Thread Starter
#573
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks pal, I am looking forward to the drive out tomorrow but I'll be keeping a tool box in the back lol
#574
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Put AP coil overs on the front today with WRC top mounts as I have got scrub now since fitting the 8J ET33 rims, this has sorted it spot on! no more scrub in the front.
![Name: IMG_5851.jpg
Views: 206
Size: 57.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58275d1501379324-mrm-speedshopis-666-van-img_5851.jpg)
![Name: IMG_5855.jpg
Views: 228
Size: 63.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58276d1501379324-mrm-speedshopis-666-van-img_5855.jpg)
![Name: IMG_5854.jpg
Views: 216
Size: 43.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58277d1501379324-mrm-speedshopis-666-van-img_5854.jpg)
![Name: IMG_5848.jpg
Views: 222
Size: 49.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58278d1501379324-mrm-speedshopis-666-van-img_5848.jpg)
![Name: IMG_5849.jpg
Views: 214
Size: 55.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58279d1501379324-mrm-speedshopis-666-van-img_5849.jpg)
![Name: IMG_5853.jpg
Views: 211
Size: 33.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58280d1501379324-mrm-speedshopis-666-van-img_5853.jpg)
![Name: IMG_5832.jpg
Views: 223
Size: 76.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58281d1501379324-mrm-speedshopis-666-van-img_5832.jpg)
![Name: IMG_5857.jpg
Views: 226
Size: 71.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58282d1501379324-mrm-speedshopis-666-van-img_5857.jpg)
Now just the back to sort, I don't get any arch scrub but the back does sway, the leaf springs wallow on bends, so I am fabricating a tramp bar set up on the back to eliminate this too, next few weeks should have that sorted.
![Name: IMG_5851.jpg
Views: 206
Size: 57.6 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58275d1501379324-mrm-speedshopis-666-van-img_5851.jpg)
![Name: IMG_5855.jpg
Views: 228
Size: 63.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58276d1501379324-mrm-speedshopis-666-van-img_5855.jpg)
![Name: IMG_5854.jpg
Views: 216
Size: 43.3 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58277d1501379324-mrm-speedshopis-666-van-img_5854.jpg)
![Name: IMG_5848.jpg
Views: 222
Size: 49.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58278d1501379324-mrm-speedshopis-666-van-img_5848.jpg)
![Name: IMG_5849.jpg
Views: 214
Size: 55.1 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58279d1501379324-mrm-speedshopis-666-van-img_5849.jpg)
![Name: IMG_5853.jpg
Views: 211
Size: 33.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58280d1501379324-mrm-speedshopis-666-van-img_5853.jpg)
![Name: IMG_5832.jpg
Views: 223
Size: 76.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58281d1501379324-mrm-speedshopis-666-van-img_5832.jpg)
![Name: IMG_5857.jpg
Views: 226
Size: 71.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/58282d1501379324-mrm-speedshopis-666-van-img_5857.jpg)
Now just the back to sort, I don't get any arch scrub but the back does sway, the leaf springs wallow on bends, so I am fabricating a tramp bar set up on the back to eliminate this too, next few weeks should have that sorted.
#575
Lucifer II - 666
Thread Starter
#577
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
They just pushed up into the turret mate and when I wound the bolts up its pulled the turret top to shape.
I'll show ya when I see ya, still managed to fit the strut brace back on too lol
I'll show ya when I see ya, still managed to fit the strut brace back on too lol
#579
PassionFord Regular
#580
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks Glenn, rides fine pal.
Thanks bud, yeah there my mates cars but also, L2 isn't in that pic lol
#582
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Good pal, off at me mate Daves getting complete loom in it atm.
#583
Lucifer II - 666
Thread Starter
#585
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Thanks pal.
#587
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
went like stink, from 34th to 10th in Sundays race!
#589
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
No, RS2000.
#590
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Has some carbon dashes made for Lucifer 2 and there was one left over, well it was the first out the mould so wasn't 100% but still ace!
I have decided to put it in the Pikey lol
I have no need for clock and most switches so all I have left to do is cut holes for heater switches and then I'll have rear fog on a push button. I have done away with middle vents, heat will just blow into cab etc...
What ya think?
![Name: IMG_6342.jpg
Views: 210
Size: 70.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55254d1501370944-mrm-speedshopis-666-van-img_6342.jpg)
![Name: IMG_6343.jpg
Views: 196
Size: 65.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55255d1501370944-mrm-speedshopis-666-van-img_6343.jpg)
![Name: IMG_6344.jpg
Views: 198
Size: 84.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55256d1501370944-mrm-speedshopis-666-van-img_6344.jpg)
![Name: IMG_6345.jpg
Views: 214
Size: 79.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55257d1501370944-mrm-speedshopis-666-van-img_6345.jpg)
![Name: IMG_6347.jpg
Views: 217
Size: 90.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55258d1501370944-mrm-speedshopis-666-van-img_6347.jpg)
I have decided to put it in the Pikey lol
I have no need for clock and most switches so all I have left to do is cut holes for heater switches and then I'll have rear fog on a push button. I have done away with middle vents, heat will just blow into cab etc...
What ya think?
![Name: IMG_6342.jpg
Views: 210
Size: 70.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55254d1501370944-mrm-speedshopis-666-van-img_6342.jpg)
![Name: IMG_6343.jpg
Views: 196
Size: 65.9 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55255d1501370944-mrm-speedshopis-666-van-img_6343.jpg)
![Name: IMG_6344.jpg
Views: 198
Size: 84.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55256d1501370944-mrm-speedshopis-666-van-img_6344.jpg)
![Name: IMG_6345.jpg
Views: 214
Size: 79.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55257d1501370944-mrm-speedshopis-666-van-img_6345.jpg)
![Name: IMG_6347.jpg
Views: 217
Size: 90.7 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55258d1501370944-mrm-speedshopis-666-van-img_6347.jpg)
![Name: IMG_6348.jpg
Views: 230
Size: 49.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/55260d1501370944-mrm-speedshopis-666-van-img_6348.jpg)
#592
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
He fitted escos panels as they're lighter and fibreglass for racing.
#598
Lucifer II - 666
Thread Starter
#599
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I have been doing some DIY recently, needing to ask some friends to borrow vans with roof racks was becoming a head ache so I bought one for the Pikey Van lol
Me and my lad drove up to Wrexham today to collect this one I got off of ebay, people hated being over tuck on the way home by a van with a roof rack lol
But, I think it looks good.
![Name: 684FF3BC-4D8A-40CA-8FEC-601E0838C721-17615-0000089B95685975_zpsae4615c5.jpg
Views: 214
Size: 223.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53830d1501367268-mrm-speedshopis-666-van-684ff3bc-4d8a-40ca-8fec-601e0838c721-17615-0000089b95685975_zpsae4615c5.jpg)
![Name: FD46039C-D98D-4D68-8E3F-D065D2B3E63F-17615-0000089BBBBE528E_zpse22637d4.jpg
Views: 267
Size: 238.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53831d1501367268-mrm-speedshopis-666-van-fd46039c-d98d-4d68-8e3f-d065d2b3e63f-17615-0000089bbbbe528e_zpse22637d4.jpg)
![Name: 316B5BDD-1CCC-4634-9AB0-7FC50DD1E835-17615-0000089BC59539CD_zps37e70428.jpg
Views: 213
Size: 221.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53833d1501367268-mrm-speedshopis-666-van-316b5bdd-1ccc-4634-9ab0-7fc50dd1e835-17615-0000089bc59539cd_zps37e70428.jpg)
Me and my lad drove up to Wrexham today to collect this one I got off of ebay, people hated being over tuck on the way home by a van with a roof rack lol
But, I think it looks good.
![Name: 684FF3BC-4D8A-40CA-8FEC-601E0838C721-17615-0000089B95685975_zpsae4615c5.jpg
Views: 214
Size: 223.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53830d1501367268-mrm-speedshopis-666-van-684ff3bc-4d8a-40ca-8fec-601e0838c721-17615-0000089b95685975_zpsae4615c5.jpg)
![Name: FD46039C-D98D-4D68-8E3F-D065D2B3E63F-17615-0000089BBBBE528E_zpse22637d4.jpg
Views: 267
Size: 238.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53831d1501367268-mrm-speedshopis-666-van-fd46039c-d98d-4d68-8e3f-d065d2b3e63f-17615-0000089bbbbe528e_zpse22637d4.jpg)
![Name: 316B5BDD-1CCC-4634-9AB0-7FC50DD1E835-17615-0000089BC59539CD_zps37e70428.jpg
Views: 213
Size: 221.8 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53833d1501367268-mrm-speedshopis-666-van-316b5bdd-1ccc-4634-9ab0-7fc50dd1e835-17615-0000089bc59539cd_zps37e70428.jpg)
![Name: 97E1630B-E7D3-430F-9143-479E69EA8D99-17615-0000089BCEAAFA43_zpsa1400e46.jpg
Views: 216
Size: 207.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53834d1501367268-mrm-speedshopis-666-van-97e1630b-e7d3-430f-9143-479e69ea8d99-17615-0000089bceaafa43_zpsa1400e46.jpg)
#600
Lucifer II - 666
Thread Starter
![Default](https://passionford.com/forum/images/icons/icon1.gif)
And this is why I got the roof rack lol
![Name: FD6DF653-A225-4F26-820A-6485C970A2C7-19503-000009A9F0E099E6_zpsd524fc45.jpg
Views: 261
Size: 180.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53772d1501366905-mrm-speedshopis-666-van-fd6df653-a225-4f26-820a-6485c970a2c7-19503-000009a9f0e099e6_zpsd524fc45.jpg)
![Name: FD6DF653-A225-4F26-820A-6485C970A2C7-19503-000009A9F0E099E6_zpsd524fc45.jpg
Views: 261
Size: 180.0 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53772d1501366905-mrm-speedshopis-666-van-fd6df653-a225-4f26-820a-6485c970a2c7-19503-000009a9f0e099e6_zpsd524fc45.jpg)
![Name: 9BCDF81F-BCCF-4CC2-984A-749915BCCA3E-19503-000009A9FFEF42AA_zps39aa0746.jpg
Views: 222
Size: 188.4 KB](https://passionford.com/forum/attachments/restorations-rebuilds-and-projects/53773d1501366905-mrm-speedshopis-666-van-9bcdf81f-bccf-4cc2-984a-749915bcca3e-19503-000009a9ffef42aa_zps39aa0746.jpg)