Ford 100e ST
#161
Regular Contributor
Thread Starter
Cheers
Cheers dude.
Ah dont! ive got an a4 piece of paper in the garage with everything i can think of, its just lots of small jobs, and a few big jobs which mean the small jobs cant be done, main jobs are making the pedals, mounting the seats, making the inlet pipe, doing the wiring, to name a few. Just time consuming things. Slowly crossing them out though
#168
10K+ Poster!!
Awsome stuff!! It obviously suits you. If anyone ever wants a refrence for you all you have to do is show them this build, simply fantastic work
#169
Regular Contributor
Thread Starter
Wow completely forgot about updating this. Haven't really touched the car for a while, but have a few small updates, wasnt going to do any until it was up and running but your words have given me some motivation
Just been finishing lots of small job really, but made this intercooler pipe this evening, pretty difficult as it needed to be a really tight weird angle bend but i think it came out good, just deciding if to put an outlet on for dump valve?
Also got my vipec v88 ecu, map sensor and wiring harness from M A Developments, it looks awesome but im not really too sure what to do with it
Will upload more photos asap
Just been finishing lots of small job really, but made this intercooler pipe this evening, pretty difficult as it needed to be a really tight weird angle bend but i think it came out good, just deciding if to put an outlet on for dump valve?
Also got my vipec v88 ecu, map sensor and wiring harness from M A Developments, it looks awesome but im not really too sure what to do with it
Will upload more photos asap
#179
Regular Contributor
Thread Starter
Small update as i havent got time to upload all the photos of the progress, but here are a couple of photos. Just a few things left to do, should be out and about in a couple of months... he says.
Will do a more detailed update soon.
Fitted the fuel tanks and mounted all the boot stuff
Finished the dry sump system, just need the belt for the pump. Had to take the sump pan off and refit with sealing o rings and new bolts, all 29 of them!
Will do a more detailed update soon.
Fitted the fuel tanks and mounted all the boot stuff
Finished the dry sump system, just need the belt for the pump. Had to take the sump pan off and refit with sealing o rings and new bolts, all 29 of them!
#184
Regular Contributor
Thread Starter
Thanks
Hoping to get the loom and mapping done by MA Developments in the next few months or so
#185
Too many posts.. I need a life!!
#187
10K+ Poster!!
Looking awesome with you! Its going to need a re feature
#195
Ben
I get a little excited whenever I see this pop up again
Just out of curiosity, how do you intend to change spark plugs?
Just out of curiosity, how do you intend to change spark plugs?
#196
Regular Contributor
Thread Starter
Been making some good progress, not long now.
Made a strut brace, had these discs laser cut
Made up a jig of the top of the suspension mounts so i could make it on the bench
not bad for Ł30
Also ive decided to run it now with front and rear bumpers so got new chrome ones, also repaired and painted the rear valance as the previous exhaust bent it when it went on the rollers.
Decided to do away with the front lexan windows and put the original opening quarters in, who would know they are fibre glass doors
Brought a second hand pair of cobra classic seats and stripped them right down to narrow the frame so they would fit in the car around the tunnel.
Decided i wanted to put head rests in them so brought the headrests from cobra, made up some sleeves on the lathe and job done. They will be trimmed in blue and cream.
Also my dad brought this Austin j40 so will be getting stuck into that in a few months
Made a strut brace, had these discs laser cut
Made up a jig of the top of the suspension mounts so i could make it on the bench
not bad for Ł30
Also ive decided to run it now with front and rear bumpers so got new chrome ones, also repaired and painted the rear valance as the previous exhaust bent it when it went on the rollers.
Decided to do away with the front lexan windows and put the original opening quarters in, who would know they are fibre glass doors
Brought a second hand pair of cobra classic seats and stripped them right down to narrow the frame so they would fit in the car around the tunnel.
Decided i wanted to put head rests in them so brought the headrests from cobra, made up some sleeves on the lathe and job done. They will be trimmed in blue and cream.
Also my dad brought this Austin j40 so will be getting stuck into that in a few months
Last edited by surrey_100e; 21-03-2013 at 10:01 PM.
#197
Regular Contributor
Thread Starter
#199
10K+ Poster!!
This must be the build of 2012/3, its simply awesome!!
#200
Regular Contributor
Thread Starter
Cheers, means alot
Not just yet, getting everything finished then taking it to get the engine loom done
Seats are done now, same colour as the interior door panels.
Not just yet, getting everything finished then taking it to get the engine loom done
Seats are done now, same colour as the interior door panels.