Focus 2.0 Zetec Turbo Build
#54
sorry, what has been done to the block?
what is the size of the current block in the car and what will be happening with it when the new engine is fitted??
i may be interested in it and any spare parts that you didnt use from the 2nd engine
what is the size of the current block in the car and what will be happening with it when the new engine is fitted??
i may be interested in it and any spare parts that you didnt use from the 2nd engine
#55
PassionBMW.com Member
Thread Starter
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes
on
0 Posts
My missus stole my digi cam, so I am round ehrs now and will take some pics later today
Adam, the engine it is replacing is a 2.0 Focus motor (like for like almost), and wll quiet possibly be up for sale, I'll ask Josh, I know he has a 2.0 Mondeo engine for sale.
The block was bored to 0.5mm oversize, honed, faces machined, front breather removed and blocked, turbo oil return fitted and a breather port put in the back
Adam, the engine it is replacing is a 2.0 Focus motor (like for like almost), and wll quiet possibly be up for sale, I'll ask Josh, I know he has a 2.0 Mondeo engine for sale.
The block was bored to 0.5mm oversize, honed, faces machined, front breather removed and blocked, turbo oil return fitted and a breather port put in the back
#58
PassionBMW.com Member
Thread Starter
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes
on
0 Posts
Oil pump fitted, all bolts now torqued up on the bottom end, also rear oil seal and housing fitted
Steel Rods, ARP bolts, Piston Oil Spray Jets and lovely Forged Pistons
#65
PassionBMW.com Member
Thread Starter
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes
on
0 Posts
Lower crank case and headgasket fitted (3 layer metal)
Head fitted (standard ports!)
Tommorow, run to Ford to pick up a gasket they didnt put in the gasket kits, sump pan on, waterpump on, time her up and thats about job done
#67
PassionBMW.com Member
Thread Starter
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes
on
0 Posts
Cams in and torqued down - note the Focus' massive external waterpump
Timing belt fitted and tensioned
Cam cover layed in place, it's about to go off to be powdercoated
Food for thought? Perhaps a future project using a Duratec ST170 head, with it's massive valves, massive ports and VVT?
#69
PassionBMW.com Member
Thread Starter
Join Date: May 2003
Location: UK
Posts: 3,530
Likes: 0
Received 0 Likes
on
0 Posts
Not 100% sure. I should have the ECU this weekend, need to spend a few hours with wiring.
The car can be delivered any time, Its a case of, I have exams at the mo, and need my own car MOTd, so that kinda takes semi priority....we shall see, hopefully it'll be at Ford Fair though (Not fully mapped/run in though)
The car can be delivered any time, Its a case of, I have exams at the mo, and need my own car MOTd, so that kinda takes semi priority....we shall see, hopefully it'll be at Ford Fair though (Not fully mapped/run in though)
#70
EXCELLENT work here phil....did you manage to do some more research regarding the st170 head and fitting? as i remember when we last spoke you were a bit unsure about the ins and outs of it...
we can chat on messenger if you like
bassboy
we can chat on messenger if you like
bassboy
#73
PassionFord Post Whore!!
Join Date: May 2003
Location: Kent
Posts: 5,719
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PhilM
Food for thought? Perhaps a future project using a Duratec ST170 head, with it's massive valves, massive ports and VVT?
#75
PassionFord Post Troll
Join Date: Jul 2005
Location: Wolverhampton
Posts: 2,608
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PhilM
300+bhp mate
Tech spec's :
205 BHP + 50 BHP shot of NOS
0 - 60 in 6 seconds.
Now this focus is supercharge'd, turbo'd and nitrous'd
Turbo : Garret T3
supercharger : jackson racing charger with 16psi pully
#77
PassionFord Post Troll
Join Date: Jul 2005
Location: Wolverhampton
Posts: 2,608
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PhilM
Is that Ruth's black Power Engineering Focus? Lovely car that
Excursion, ....will be looking into that more shortly I think
Excursion, ....will be looking into that more shortly I think
#78
Too many posts.. I need a life!!
Join Date: May 2004
Location: Reading/Essex
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by AndyRST
Originally Posted by PhilM
Food for thought? Perhaps a future project using a Duratec ST170 head, with it's massive valves, massive ports and VVT?
Not really too good of a engine to turbo mate, would stick with the standard 2ltr block tbh
#79
Bulletin Board User
Originally Posted by MarkyMark
Not really too good of a engine to turbo mate, would stick with the standard 2ltr block tbh