mid-engined series 2 escort turbo project...
#1
mid-engined series 2 escort turbo project...
i bought this about 2months back now, i have sold my series 1 so this is now underway. a few pics of when i first got her and a few of where i am now. im hoping to get this finished for central day 2011.
engine spec,
virgin crank
wossner forged pistons
farndon h section con rods
cnc machined NEW efi cylinder head
big valves
newman phase 4 camshaft
solid lifters
double valve springs
vernier
cosworth managment p8
anti-lag
coilpack
403's
T34.48
tublula manifold from crazycage off here
cts stage 2+ gearbox
ap 4 paddle
ive just bought 4xadjustable tca's, im going to buy coilovers all round.
mk1 frs brembos and discs with ebc yellowstuff pads
engine spec,
virgin crank
wossner forged pistons
farndon h section con rods
cnc machined NEW efi cylinder head
big valves
newman phase 4 camshaft
solid lifters
double valve springs
vernier
cosworth managment p8
anti-lag
coilpack
403's
T34.48
tublula manifold from crazycage off here
cts stage 2+ gearbox
ap 4 paddle
ive just bought 4xadjustable tca's, im going to buy coilovers all round.
mk1 frs brembos and discs with ebc yellowstuff pads
Last edited by s1cab; 28-11-2010 at 05:20 PM.
#6
I've found that life I needed.. It's HERE!!
iTrader: (2)
Join Date: Jan 2008
Location: watFORD
Posts: 1,397
Likes: 0
Received 0 Likes
on
0 Posts
i bought this about 2months back now, i have sold my series 1 so this is now underway. a few pics of when i first got her and a few of where i am now. im hoping to get this finished for central day 2011.
engine spec,
virgin crank
wossner forged pistons
farndon h section con rods
cnc machined efi cylinder head
big valves
newman phase 4 camshaft
solid lifters
double valve springs
vernier
cosworth managment p8
anti-lag
coilpack
403's
(still trying to choose turbo and manifold)
cts stage 2+ gearbox
ap 4 paddle
ive just bought 4xadjustable tca's, im going to buy coilovers all round.
mk1 frs brembos and discs with ebc yellowstuff pads
engine spec,
virgin crank
wossner forged pistons
farndon h section con rods
cnc machined efi cylinder head
big valves
newman phase 4 camshaft
solid lifters
double valve springs
vernier
cosworth managment p8
anti-lag
coilpack
403's
(still trying to choose turbo and manifold)
cts stage 2+ gearbox
ap 4 paddle
ive just bought 4xadjustable tca's, im going to buy coilovers all round.
mk1 frs brembos and discs with ebc yellowstuff pads
I see you had to get the word virgin in that spec........
Trending Topics
#13
PassionFord Post Troll
I wouldn't bother. With mac struts and front wheel drive geometry on the back it wont be the best of drives.
I'm sure this car will be fine for a laugh but if you want somethingg that handles properly this is not the way to do it.
I'm sure this car will be fine for a laugh but if you want somethingg that handles properly this is not the way to do it.
#14
Advanced PassionFord User
iTrader: (1)
Is it this one
http://www.youtube.com/watch?v=bbzpSe5elsA
http://www.youtube.com/watch?v=p-hV5...eature=related
Looks like fun
http://www.youtube.com/watch?v=bbzpSe5elsA
http://www.youtube.com/watch?v=p-hV5...eature=related
Looks like fun
#15
yeah thats the one
i've been told that the geometry won't be a problem. as i will have adjustable tca's, 2x steering racks (one locked), and gaz said they can supply coilovers that will suit the car fine. then i'll get it all set up and corner weighted so should be fine.
i've been told that the geometry won't be a problem. as i will have adjustable tca's, 2x steering racks (one locked), and gaz said they can supply coilovers that will suit the car fine. then i'll get it all set up and corner weighted so should be fine.
#16
PassionFord Regular
#17
PassionFord Post Whore!!
iTrader: (3)
a little action from this car years ago by old owner with mild engine so should be great fun with 320bhp
http://www.youtube.com/watch?v=bbzpS...eature=related
http://www.youtube.com/watch?v=bbzpS...eature=related
#19
Regular Contributor
yer car was built by a buch of lads, they fitted an xr3i running gear into it & used it for abit of fun then car was converted to turbo spec but neva ran/was finished.
this is where i brought it
i got it all finished & took it out for a kane (you turbo vids) car was seriously underpowerd & wasnt boosting right. all or nothing hence erratic/shite driving it the vid lol
all suspension was std lowerd/cut springs
it did handle like shite as all the weight was in the rear so when u had 2 flick it out (balls out) it just swung around it a circle.
howeva with a decent spec'd engine/running right & all the suspension set up correct i think the car should perform/handle ok
be nice to see sum fresh vids of it goin as it should!
this is where i brought it
i got it all finished & took it out for a kane (you turbo vids) car was seriously underpowerd & wasnt boosting right. all or nothing hence erratic/shite driving it the vid lol
all suspension was std lowerd/cut springs
it did handle like shite as all the weight was in the rear so when u had 2 flick it out (balls out) it just swung around it a circle.
howeva with a decent spec'd engine/running right & all the suspension set up correct i think the car should perform/handle ok
be nice to see sum fresh vids of it goin as it should!
#20
I'm Finding My Feet Here Now
Join Date: Aug 2004
Location: great yarmouth
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
lol as if its still about i remember this, look on youtube for it you will see what rosie is on about, oh its not nice when the oil cap pops off either
#22
fitted the adjustable tca's and rose jointed track rod ends. big thanks to compbrake!
have cut out all of the old mfi loom and un-needed wires. started to get cossie engine loom in. also have ordered a tubula manifold and a hydrolic clutch conversion from crazycage and just got myself a T34.48.
have cut out all of the old mfi loom and un-needed wires. started to get cossie engine loom in. also have ordered a tubula manifold and a hydrolic clutch conversion from crazycage and just got myself a T34.48.
Last edited by s1cab; 18-10-2010 at 05:50 PM.
#27
Zee Germans are coming
i would get in so much trouble in that
with some proper rubber it should do good quarter times as well
good job you have put some proper rods in there
wouldnt be nice if a standard one left the building
with some proper rubber it should do good quarter times as well
good job you have put some proper rods in there
wouldnt be nice if a standard one left the building
#39
Turbocharging Technician
Join Date: Jul 2010
Location: Top secret. Mission:Imposible.
Posts: 3,557
Likes: 0
Received 0 Likes
on
0 Posts