My Fiesta (supercharger purchased)
#81
Regular Contributor
Thread Starter
who ever said mk6 doors dont rust is full of poo this was just a little spot a few months ago lol
anyway i finally decided to fix one of my doors today
before
after
anyway i finally decided to fix one of my doors today
before
after
#82
Regular Contributor
Thread Starter
well as DMX said '' here we go again''
also bit of an oem upgrade got rid of the chrome style ones in favor of some good old ford ones
before
after
makes the front end look cleaner again
also bit of an oem upgrade got rid of the chrome style ones in favor of some good old ford ones
before
after
makes the front end look cleaner again
#83
Regular Contributor
Thread Starter
well today i thought i would up the performance a little bit so i bought an induction kit bought a universal one as it could fit onto the larger throttle bodie when i make my inlet like this
and it could also fit on the original one for this show season / until i build and fit my inlet
and it could also fit on the original one for this show season / until i build and fit my inlet
#84
10K+ Poster!!
Looking tidy, not sure what sort of sign it is when its already rusting, doesn't look like ford are good at this anti corrosion stuff.
#86
Ben
Just out of curiosity, do the st bumpers fit straight up to a standard lower spec Fiesta? And same question with the engine?
Ben.
Ben.
#88
Ben
Awesome, I'm thinking of following a similar path, 1.6 for a bit extra poke.
Thanks.
Thanks.
#90
Regular Contributor
Thread Starter
not my car but the missus
decided to patch up her door after sorting my own out bit bigger job then i thought it was going to be
as a temp fix i have filled it with liquid metal to make it strong again till i can find a door
has been block sanded and is alot smoother finish then that have also put it in primer but with ford fair coming up havent had time to crack on with it
as for my car ive been doing a bit of track prepping and applying a few stickers
decided to patch up her door after sorting my own out bit bigger job then i thought it was going to be
as a temp fix i have filled it with liquid metal to make it strong again till i can find a door
has been block sanded and is alot smoother finish then that have also put it in primer but with ford fair coming up havent had time to crack on with it
as for my car ive been doing a bit of track prepping and applying a few stickers
#91
Regular Contributor
Thread Starter
at ford fair yesterday decided to buy myself some new exhaust mounts and at 12 quid for 4 thought it was a bargin
fitted the oranges
had to do a few minor mods to fit them as they are alot bigger then standard items
and heres my miss match of standards
theres no exhaust wobble at all so im guessing it should of cured the nocking it does on the heatsheild / underbody thats common with the system
fitted the oranges
had to do a few minor mods to fit them as they are alot bigger then standard items
and heres my miss match of standards
theres no exhaust wobble at all so im guessing it should of cured the nocking it does on the heatsheild / underbody thats common with the system
#93
Regular Contributor
Thread Starter
May have done what was you in I was doing a slow drive as my engine managment light popped on on my way to the hotel night before the show lol was only o2 sensor though still went on track though lol
#95
Regular Contributor
Thread Starter
no mate its just the way they rust because of the silly outer plastics allowing water through and rotting it from the inside out
money allowing will be changing the lights when i can afford to they where a mod of the time and i havent bothered upgrading i was looking at putting some 6.5 rears on but at the moment cash is tied up sorting out its brething issues and its want to kill o2 sensors on a weekly basis my theory at the moment is the 1.25 throttle bodie is not allowing the right air to fuel ratio in and is allowing it to run rich and kill the sensors
inspected the cat theres no blockages and its heating up like should do
#96
Regular Contributor
Thread Starter
well because im cheap and forgot my camera decided to nick my pics of the websites
me entering ford fair
me on track
if anyone actually came over to my corner and took a pic of my car can you post it here
me entering ford fair
me on track
if anyone actually came over to my corner and took a pic of my car can you post it here
#97
Regular Contributor
Thread Starter
well today i set out to get myself a set of those mist jets for the car poped over to ford and picked myself up a set of non heated ones :biggrin:
then i decided havent been over to my local scrappy for a while so while i was down those ways i popped in to see if i can pick up a set of 6.5 rear lights for cheap and spotted this in a modified 1.25 and had to have it thought it was going to cost me a bomb but he said Ł15 quid didnt get the lights though but i got a 3rd brake light and ill just pop in when ever to pick up the other two
got home and fitted it
before
after
so all in all a good morning
then i decided havent been over to my local scrappy for a while so while i was down those ways i popped in to see if i can pick up a set of 6.5 rear lights for cheap and spotted this in a modified 1.25 and had to have it thought it was going to cost me a bomb but he said Ł15 quid didnt get the lights though but i got a 3rd brake light and ill just pop in when ever to pick up the other two
got home and fitted it
before
after
so all in all a good morning
#98
Ben
Steering wheel look's good pal, what's it out of? ST?
#102
10K+ Poster!!
Looking good, nice to see you using it on track too.
#106
Regular Contributor
Thread Starter
well just took a 5 hour round trip at the spare of the moment for these
got them at such a cheap price i couldnt resist the seller even threw in a free bucket seat
just needs a little tidying up and its good to go
got them at such a cheap price i couldnt resist the seller even threw in a free bucket seat
just needs a little tidying up and its good to go
#107
Regular Contributor
Thread Starter
update time
got the first seat in
thought i would do the passenger first just incase i ran into any issues with the fitting but seemed to go in well
looks good against the old one
will get some daylight pics soon and possibly one with both in asap
got the first seat in
thought i would do the passenger first just incase i ran into any issues with the fitting but seemed to go in well
looks good against the old one
will get some daylight pics soon and possibly one with both in asap
#113
Too many posts.. I need a life!!
what did you did you have to do to fit the seats ? as my girlfriend is looking for some better seats for her mk6 zs as the standard ones are crap
#114
PassionFord Post Whore!!
#115
Regular Contributor
Thread Starter
i work out of my own house have a garage with a pit in it so does me for what i need
#116
Regular Contributor
Thread Starter
well today i picked up a new gear stick surround as my temp fix old one was looking a bit sad for its self and i didnt like the placing of a few things so decided to change them with this one
before
after
before
after
#117
Regular Contributor
Thread Starter
ordered steel for my inlet yesterday on ebay and within 24 hours its here
3mm thick so should cope with n/a or foced induction applications and i should be able to tap threads into it for the throttle bodie and other items
3mm thick so should cope with n/a or foced induction applications and i should be able to tap threads into it for the throttle bodie and other items
#118
Regular Contributor
Thread Starter
well today after 4 years of hard use i decided to replace my rear discs and pads
old
new
pad was a bit glazed
but good for another few years of abuse
old
new
pad was a bit glazed
but good for another few years of abuse
#120
Regular Contributor
Thread Starter
Cool mate I work not to far from the place so if im in I can skive I'll pop out and join you
Last edited by Shilly; 03-10-2011 at 07:07 PM.