When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
thanks for the kind word lads:made another gasket for the steering bearing as i wasnt happy with the paper one:
and fitted along with the master cylinder for the clutch:
fitted new vapour barrier to the doors and re-fitted the door cards
gear lever surround and new gaitor fitted and a set of very good side repeaters kindly donated by saphcos mike
also had the exhaust manifold blasted,came out nice i think.
Awesome Jeff, I don't suppose you fancy knocking up a spacer for the clutch and the steering bearing, I'll pay of course, if you have time no bother if not pal
Awesome Jeff, I don't suppose you fancy knocking up a spacer for the clutch and the steering bearing, I'll pay of course, if you have time no bother if not pal
Chris by spacer do you mean strengthening plate?
I only used a strengthening plate for master cylinder not the bearing, ill knock you up one at the weekend and get back to you.
Awesome Jeff, I don't suppose you fancy knocking up a spacer for the clutch and the steering bearing, I'll pay of course, if you have time no bother if not pal
it'll be posted this week mate,nice talking to you today
headlining now back in,thanks to saphcos mike for his help with this one
sunroof slide needs a good clean now
master cylinder back on today along with abs block:
not a lot to be honest mate,mikes done a couple more brake pipes for me since I last up-dated,only one more to do,they'll look nice once painted up and clipped in.
the cars back on axle stands,needs a good clean under there,still covered in dust from the body shop.
and as stephen says below ive dropped off the steering rack to be re-furbished which should be back soon.
Originally Posted by stephenbatey
Rack's just been picked up Jeff mate, missed you yesterday I was having a day off lol.
a day off how did you manage that,i thought they where slave drivers down there lol!
I hope so adam all depends on the money really.
Dont throw out your rack mate just take it to your local motorists discount store and they wil sort the re-furb for you.
thanks for the kind word lads:made another gasket for the steering bearing as i wasnt happy with the paper one:
and fitted along with the master cylinder for the clutch:
fitted new vapour barrier to the doors and re-fitted the door cards
gear lever surround and new gaitor fitted and a set of very good side repeaters kindly donated by saphcos mike
also had the exhaust manifold blasted,came out nice i think.
where can i get one of these steering bearings they where on ebay a while ago but cant find them anymore?
thought id do a small update:
got the steering rack back a couple of weeks ago but wasn't 100% with the way they slapped the paint on so stripped it all off and re-done it.
how it was returned to me,with new hard pipes fitted
rubbed down:
etch primed:
and painted:
also changed the rear crank seal and spigot bearing:
flywheel ready to be bolted on along with new ap six paddle:
12-11-2013, 07:19 PM
absolutely stunning, on another level completely 
thanks to mike for that.
