(COLEYST200) focus to focos / skyline gear box
#1
(COLEYST200) focus to focos / skyline gear box
As you may or may not know, i done the last thread for Coley on his 3dr restoration as its just easier me doing it for various reasons. Anyway, as his car is near enough done now, he has been on about to us for a while to do a FOCOS project.
So a few phone calls later, this is what turned up yesterday.
The car itself is going to be an ongoing project so updates won't be as regular as normal, its more for fun really but we'll see how it goes.
There is no plans as such with where he's going with this. 2wd? 4wd? Maybe looking at a track car? Any ideas welcome and if anyone has any pointers please feel free to let Coley know.
Enough chat now here's some pics of it turning up.......
Please ignore the RS badge
Car was took to Coleys sister in laws garage to be stored for abit till he can get some space freed up at home. Was fun lifting it from the flatbed into the garage....
In its new home for now....
Few random shots of inside and outside of it....
Dash board out......
A few panels also came with the car. Out of the doors, wings, boot and bonnet, the drivers door needs abit of work so all in all not too bad...
So there you have it for now, i'll update as and when and im sure Coley will be adding his bit along the line aswell
So a few phone calls later, this is what turned up yesterday.
The car itself is going to be an ongoing project so updates won't be as regular as normal, its more for fun really but we'll see how it goes.
There is no plans as such with where he's going with this. 2wd? 4wd? Maybe looking at a track car? Any ideas welcome and if anyone has any pointers please feel free to let Coley know.
Enough chat now here's some pics of it turning up.......
Please ignore the RS badge
Car was took to Coleys sister in laws garage to be stored for abit till he can get some space freed up at home. Was fun lifting it from the flatbed into the garage....
In its new home for now....
Few random shots of inside and outside of it....
Dash board out......
A few panels also came with the car. Out of the doors, wings, boot and bonnet, the drivers door needs abit of work so all in all not too bad...
So there you have it for now, i'll update as and when and im sure Coley will be adding his bit along the line aswell
Last edited by Jumbo; 12-10-2014 at 09:18 PM.
#6
Trending Topics
#13
PassionFord Post Whore!!
iTrader: (2)
Joined: Jun 2009
Posts: 8,308
Likes: 25
From: catterick/sunny yorkshire
the grab rails are a rite cunt to get out lads that helpd me broke two lol ,just as well i had spares ,seems like ages since i got mine in same state ,take pics were the wiring loom go's it all helps when its been in bits for a while , didnt get chance on mine
#14
iv just got home as tonight the my sister in law needed to take some stuff back to B&Q so when we all got back i went to have a look at wot sam had been up to . he has not done to bad for a 15 year old . well it was the first time i had any time to done any thing to it so with sams help we got all the loom out which i think will be going in the bin as its been cut all over the place and theres a lot of it missing still it out we all so got all the heater box out and all the sound deadening material from behind the dash out plus all the stuff from the engine bay out as well . tail gate is all so of the car now . at this time i said it was time for some photos and home time . one photo and the battery was flat so sam has done some for me which he is going to send over to me so i can post them up . im very happy with wot iv seen up to now with the shell
#18
Just a small one today as iv been down to my local steel stockholder in my lunch brake as i was working in Birminghan today so iv now got the steel to start making some parts
#21
Well iv been down to were the shell is and done a small bit as there was non of the front end with the shell a had a look round some of the yards nere me and got wot i needed for Ł40 so im happy with that . the new parts are on just to make shower there ok . all so i tuck the cosworth floor down with me and all we did with it was place it in side to start to see were the focus has got to be cut and the shell is now on stands so next weekend we can get the rear beam off the shell . i will have some more to update befor the day is out as iv all so been working on my lathe makeing some parts for the focus shell.
As you can see there is going to be a lot of cutting to get it in
As you can see there is going to be a lot of cutting to get it in
#24
the steel cost me 22 pound
and as for the sizes no rush by the end of the day will be good
only kiding mate when you get time thanks for your help
and as for the sizes no rush by the end of the day will be good
only kiding mate when you get time thanks for your help
Last edited by COLEYST200; 14-02-2010 at 10:31 AM.
#29
Iv done a small bit tonight i started sorting some of the stuff i will need for this build and all so started doing a bit of the fab work but then i ran out of gas
#30
The wife said to me tonight shell we go and see her sis . well wot could i say but yes as that were the shell is at the mo . so she did let me have a look at it for 30 min so i made a start on getting some of the focu mouts off that are no longer needed for the build
and how mad the battery went flat when i had one more braket to get of
and how mad the battery went flat when i had one more braket to get of
#33
PassionFord Post Whore!!
iTrader: (2)
Joined: Jun 2009
Posts: 8,308
Likes: 25
From: catterick/sunny yorkshire
looking good mate one thing tho id use thicker tin sheet for the bosses to car that stuff looks bit thin carnt wait to get home tmro afternoon an get mine in the garage now not touched it in a week
#34
your right mate it was 1.6 mm but when i welded it up i fort thats not goo so iv now got 2mm and im a lot happyer with it now i will get a photo up so you can see wot iv done
#38