Track saphhire
#281
Thread Starter
Too many posts.. I need a life!!
iTrader: (3)
Joined: Nov 2009
Posts: 566
Likes: 0
From: suffolk
Hi I have done loads to the car over the last few months but not updated here as did'nt think any one would want to see!But I have been working hard to get it on its wheels
I brought these grp a check straps to stop all the travel when unloaded
this is all the travel I have with the rear shock loaded.Unloaded theres 170mm -the 40mm bump stop
I am going to cut the body mount off the car and extend the front by 50mm witch is all I can get so the bonnet will close
And the rear can be extend as much as you like as these loads of room but 50mm in there will work for me
Shame about the nice painted shell!!!!!!!
Got a 909 front strut brace but if I extend the struts then it will not fit
Found some grp a roof hatches do I cut the roof
I don't know about them yet?may get them carbon rapped
PAS cooler fitted
Picked up an ATL fuel cell bit bigger that I wanted but the right price!!!!
Came with atl sender and gauge,atl 1.5l swirl pot,and atl filled cap uint.Got a lift pump just need a 044 and fuel lines and alloy fuel rail
SCS beam is on got to come off as it needs a bush replacing
Grp a roll bar tempory fitted
Rear brakes on
Pollycarb windows fitted,new front screen,test fitted the mirrors
So its ROLL'IN ROLL'IN but has to be sripped to mod the body
I brought these grp a check straps to stop all the travel when unloaded
this is all the travel I have with the rear shock loaded.Unloaded theres 170mm -the 40mm bump stop
I am going to cut the body mount off the car and extend the front by 50mm witch is all I can get so the bonnet will close
And the rear can be extend as much as you like as these loads of room but 50mm in there will work for me
Shame about the nice painted shell!!!!!!!
Got a 909 front strut brace but if I extend the struts then it will not fit
Found some grp a roof hatches do I cut the roof
I don't know about them yet?may get them carbon rapped
PAS cooler fitted
Picked up an ATL fuel cell bit bigger that I wanted but the right price!!!!
Came with atl sender and gauge,atl 1.5l swirl pot,and atl filled cap uint.Got a lift pump just need a 044 and fuel lines and alloy fuel rail
SCS beam is on got to come off as it needs a bush replacing
Grp a roll bar tempory fitted
Rear brakes on
Pollycarb windows fitted,new front screen,test fitted the mirrors
So its ROLL'IN ROLL'IN but has to be sripped to mod the body
#292
Awesome cannot describe it different ! Cannot wait to see the next pictures ...
I know what you mean with the monte 18" wheels have the same problem need to sell mine first . Did you order yours ?
Steven
I know what you mean with the monte 18" wheels have the same problem need to sell mine first . Did you order yours ?
Steven
#300
Thread Starter
Too many posts.. I need a life!!
iTrader: (3)
Joined: Nov 2009
Posts: 566
Likes: 0
From: suffolk
I have thought long and hard about the shock travel problems and have seen this pis of some top mounts and think I will make mine the same.
Change from the Grp A mount and use something like this
http://www.ebay.co.uk/itm/Peugeot-10...item2c5f6ba00d
or
http://www.ebay.co.uk/itm/Alloy-Adju...item45fb61e621
Here we go cutting the new painted shell
Change from the Grp A mount and use something like this
http://www.ebay.co.uk/itm/Peugeot-10...item2c5f6ba00d
or
http://www.ebay.co.uk/itm/Alloy-Adju...item45fb61e621
Here we go cutting the new painted shell
#303
That's what we like! 500hp has to be done in a cossie! I like the plans....
And the car is epic
Why's it on hold, because of the problems?
#307
#313
any info on the arb's where did you get them?and how much where they?i have been looking at the rally design one's would they be any good?thankshttp://www.rallydesign.co.uk/product_info.php?products_id=7196
Last edited by blue oval 24v; 13-11-2011 at 10:13 PM.