purple escort > ready for show season
#89
I got a black top zetec 2.0 came from a mint car, 77k with full service history, would be willing to swap/part x against rst cvh zvh or silver top zetec 2.0
Unless some one can tell me how to fabricate the mounts etc that I need to build a zetec turbo using the black top
Unless some one can tell me how to fabricate the mounts etc that I need to build a zetec turbo using the black top
#91
full interior in, tailored frames been litterally chopped in less than half and re welded so the seat can sit lower, last time the recaro's were in they were pretty much bolted to the floor. rear seats in as well, may get them all trimmed but atm the engines prioritty
engine bay wwas in desperate need of a tidy up, ignore the gold catch, it'll be sorted ahahaha
full boot build, took about 10 hours to complete from start to finnish, thanksto shaun for the help, all trimmed in leather
all ready to go now before the engine work starts
engine bay wwas in desperate need of a tidy up, ignore the gold catch, it'll be sorted ahahaha
full boot build, took about 10 hours to complete from start to finnish, thanksto shaun for the help, all trimmed in leather
all ready to go now before the engine work starts
Last edited by s23rta; 28-02-2011 at 04:05 PM.
#92
Started on the engine, building a zetec turbo from a black top, stripped the head and cleaned it up at work this morning
Lined the rst gasket up to see where I gotta drill, not a damn hole lines up, just my luck,
Bought a front mount from redbitz in cannock, got a t3 off eBay in good cond. Can't wait to get it all built up
Lined the rst gasket up to see where I gotta drill, not a damn hole lines up, just my luck,
Bought a front mount from redbitz in cannock, got a t3 off eBay in good cond. Can't wait to get it all built up
Last edited by s23rta; 28-02-2011 at 04:07 PM.
#93
heads finnished
started work on the bottem end this week but im moving out soon so ill have my own garage to work in
need some help with management, thinking of using ofab, can anyone help with info on it please?
started work on the bottem end this week but im moving out soon so ill have my own garage to work in
need some help with management, thinking of using ofab, can anyone help with info on it please?
#99
whats spec of zt pal, what t3? one of a rst aint worth fitting imo, t3 from a cossie would be better at 12 psi, standard bottom end with decomp, ofab management with ahmed live map/chip, fiat coupe beige injectors, rover coupe turbo inlet ( i have one of these) and few other bits can make 250 and 250+ftlbs
Last edited by crumpet; 01-04-2011 at 10:32 PM.
#101
whats spec of zt pal, what t3? one of a rst aint worth fitting imo, t3 from a cossie would be better at 12 psi, standard bottom end with decomp, ofab management with ahmed live map/chip, fiat coupe beige injectors, rover coupe turbo inlet ( i have one of these) and few other bits can make 250 and 250+ftlbs
Fiat coupe injectors? Never thought about them, how much do they go for?
I would love to use ms but ATM I'm on a tight budget as I just bought my first house so I thought ofab would be the best option for now
#104
Not a zetec anyway but i can gaurantee a rst t3 with a .36 housing will be too small, and people will agree with me, best bet is to buy a cossie t3 which has a .48 housing and bigger compressor side, at 14 psi can make around 240-250bhp, plus you can run a 3" downpipe easily which you can move around as it has the 3 bolt housing.
Also you need the flywheel from your standard 1.8 for a rst clutch
Also you need the flywheel from your standard 1.8 for a rst clutch
#107
#108
had a little tidy up ready for central day tomoro
fitted bonnet lifters and laguna splitter, only did it to see what it would look like but i like 'em so their staying for now
cant wait for central day
fitted bonnet lifters and laguna splitter, only did it to see what it would look like but i like 'em so their staying for now
cant wait for central day
#119
#120
Got the Internet again after a long few months lol, quiet a bit of work been done, mainly the engine
vht paint
metallic grey
breathers
turbo oil return
before
after
s2 t3 on right, mine on the left..... Can any one tell me what it is? Is it cosworth t3?
vht paint
metallic grey
breathers
turbo oil return
before
after
s2 t3 on right, mine on the left..... Can any one tell me what it is? Is it cosworth t3?