Escort 2.0l 16v track day project update 27/10/12 rs 1700t bootlid painted
22-05-2010, 04:21 PM
#485
Ok more updates 
Rear compensators mounted and brake lines run
Exhaust up and gear linkage mounted
Fuel and brake pipes 99% done
Airtec rad and turbo fan mounted
Fuel filter bracket mounted (pipe that looks tight is being replaced )
Most of the water pipes on
More soon
Rear compensators mounted and brake lines run
Exhaust up and gear linkage mounted
Fuel and brake pipes 99% done
Airtec rad and turbo fan mounted
Fuel filter bracket mounted (pipe that looks tight is being replaced )
Most of the water pipes on
More soon
23-05-2010, 04:31 PM
#490
PassionFord Post Whore!!
What are the Rear compensators off. . . need to do this mod to mine before it hits the road 
23-05-2010, 09:04 PM
#492
Regular Contributor
Join Date: Nov 2004
Location: Essex
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
nice to see ya at it again dave, makes me wanna pull my finger out and start my mk3 fiesta si 2 litre track (fun) car although mines never gonna be as clean as this
25-05-2010, 10:22 PM
#493
PassionFord Post Whore!!
26-05-2010, 05:36 PM
#497
Lucifer II - 666
Looks really good already, unbelievably mint for a budget track car lol
I followed your advice you gave me re- the stone chip on my shell. Purchased the gun and some tins and did it the other week -
Going over it in same colour as the body now, easier to do than I thought it would be.
I followed your advice you gave me re- the stone chip on my shell. Purchased the gun and some tins and did it the other week -
Going over it in same colour as the body now, easier to do than I thought it would be.
26-05-2010, 06:31 PM
#498
Looks really good already, unbelievably mint for a budget track car lol
I followed your advice you gave me re- the stone chip on my shell. Purchased the gun and some tins and did it the other week -
Going over it in same colour as the body now, easier to do than I thought it would be.
I followed your advice you gave me re- the stone chip on my shell. Purchased the gun and some tins and did it the other week -
Going over it in same colour as the body now, easier to do than I thought it would be.
Well?? I've had me curry..... waiting still
30-05-2010, 09:35 PM
#501
There will be an update soon ,but the good news is the car is running ,big thanks to Gadget who came over and dave jordan and got the old girl fired up ,does sound very nice ,will get some pics up tommorow as our camera is knackared and had to get a mates one
Last edited by Twins; 31-05-2010 at 10:51 PM.
31-05-2010, 06:48 AM
#503
Spanner monkey
31-05-2010, 11:08 PM
#514
Ok time for a massive update she is running 
Big big thanks to Gadget and dave jordan for doing the wiring side of things as i must admit to being no good at this lol 
anyway Gary came down sunday and wired up the pump and switches etc ,then they set about the loom ,stripped back what was not needed and after a few hours the old girl sparked into life ,and i must say it does sound nice with the 4 branch and stainless on,then it was the job of just tidying the wireing in the bay ect .some pics
Running the pump wireing
As the tray was going to be looked at in the future to be tidied up ,i had an idea of blanking the area off with a scrap of carbon ,this would hide the tray area (not rotton just untidy lol) and also the edis module was mounted behind out of sight,and the ecu loom run in the car.
Pump relay
Just need to get a bracket for the ecu
Fixed in a couple of stowage nets ,also got a bolt in rear brace this will go satin black.
Wired the fans on to a switch above the pump switch
Then got it down on all fours
Can get the front section of cage bolted down now and start looking at the seats and runners ,oh and the carbon
Big big thanks to Gadget and dave jordan for doing the wiring side of things as i must admit to being no good at this lol anyway Gary came down sunday and wired up the pump and switches etc ,then they set about the loom ,stripped back what was not needed and after a few hours the old girl sparked into life ,and i must say it does sound nice with the 4 branch and stainless on,then it was the job of just tidying the wireing in the bay ect .some pics Running the pump wireing
As the tray was going to be looked at in the future to be tidied up ,i had an idea of blanking the area off with a scrap of carbon ,this would hide the tray area (not rotton just untidy lol) and also the edis module was mounted behind out of sight,and the ecu loom run in the car.
Pump relay
Just need to get a bracket for the ecu
Fixed in a couple of stowage nets ,also got a bolt in rear brace this will go satin black.
Wired the fans on to a switch above the pump switch
Then got it down on all fours
Can get the front section of cage bolted down now and start looking at the seats and runners ,oh and the carbon
