where did u buy the fuel tank from

 

Simon is getting it, its just a standard one. Want to keep the centre of gravity down. Using a cossie fuel pump. Unsure of the swirl pot options yet though.

 

if u dont mind me asking what is it costing u to get the engine done was going to do my own but dont have the time

 

I'll PM you

 

Hungarian Fiesta Zetec Turbo:

http://timeslip.hu/szabyk/?page=6

 

very nice! how long has simon projected to have this done if he knows mate?

another scottish mk3

fire over to fiestaclubscotland.co.uk and introduce yourself there mate, be good to have you on board!!

neil

 

I could have it finished by March maybe if I had all the cash just now, but I don't so I'll just take my time. If I have it finished for summer I'll be happy.

I'll take a look at the site and sign up.

 

nice one mate, loving the mk5 rear beam idea, how long did it take you to do the conversion on it? are you still running mk3 suspension or do you have to use mk5 uprated stuff when ordering up? also i take it your using mk3 top mounts for the turrets on the car?

 

Well its a straight forwad swap, but it took me a few hours because all the bolts were rusted on theold one! Soit should take you a few hours at the most, and having owned a mk3 before and a mk5 zetec-s(IMO the best handling fiesta made) the difference is great.

MK3 suspension will fit straight on, alot of people may not be aware that the mk4, 5 was just a clever update of the mk3.5. The front chassis legs etc are quite different, but from the windscreen back its much the same. I am putting in a mk5 dash.

Any more questions just ask.

 

nice one mate, i'll try and find a beam and get cracking, looks like a proper good conversion that even just for the rear discs on it!

what else you got planned for handling wise on your car?

 

At the front I was going to get compbrake rose jointed wisbones, poly bushed anti-roll bar, and rear beam. Thats about it at the moment.

 

proper stuff mate liking it more

oh forgot to ask, for brake lines on the rear i take it you'll be running stainless braided ones? do you know if its just mk3 ones with having the discs on the back or do you need to get another pair from another ford?

cheers mate.

neil

 

I'll be running aluminium brake lines through the inside of the car, braided ones to the calipers. You can fit fiesta front ones to the rear or try and get FRP ones, as they had this setup as sandard.

 

Looking good Adam! Lovely colour and the ZS wheels in anchracite look really nice. Shame they're not big enough for good brake clearance.

 

cheers mate, i'll probably give you a shout once i have all the bits if i need any advice.

much appreciated mate!

 

Cheers Rob, yeah I know about the wheels. Going to have to ask Chris for a quote on some Comps....out comes the credit card again!

 

Cool, comps are good but fucking heavy! lol

I can squeeze my 300mm wilwoods under them though which is good!

 

Heavy?thought they were light motorsport wheels.....anyway, on the lookout for some speedline turinis aswell. Yeah would love some 4 pots on the ST170 disks.

 

They're motorsport wheels, i wouldn't call them light though! haha

 

I'll need them for the clearence, I want to keep 15's for the handling and choice of rubber.

 

Yea tyres are so much cheaper in 15" i didn't want to go any bigger either!

 

No new pics of progress as all thats been done is but parts. The snow is really bad up in Blair Athol so I haven't been up for a while.

I said the engine would be getting built but thats off at the moment as we are doing the chassis, cage and box etc first....

So purchases...

OMP cage
seat mounts
new fuel tank(standard)
Cossie fuel pump
Fuel lines(inside car)
floor mounted pedal box
fluid resevoirs for brakes and clutch
all brake fittings
brake lines(inside car)
clutch fittings
brake pads
FRP handbrake cable

Airtec matt black Stage 2 Front mount intercooler

new mk5 dash...off getting flocked

And I had an e-mail from Simon earlier saying he had prices for my new driveshafts,clutch and flywheel. And a new Gotech Pro-X ECU and loom.

Most of the parts should be there this week, weather permitting.

Again thanks for all your comments and encouragement

 

where have you sourced a fuel tank from???

 

It was Simon that is sourcing everything nearly, fuel tank included.

 

Hi Adam,

I have had no deliverys yet this year. Snow related.

Got the Fuel tank.

Simon.

 

The snow is just going to get worse, and then its just freezing! Won't be gone for a few weeks yet. Bought the intercooler yesterday, being sent straight to you Simon.

 

any pics of how it looks mate.

 

Unfortunately not due to the weather nothing has been delivered, so unable to get the work done. It still looks the same as it did when i dropped it of....except for a few feet of snow on top!

 

That is correct


The intercooler has just turned up.

Simon.

 

Looking at the weatherit seems that there is going to be a few days without snow, but still cold. Its good that the intercooler arrived. When I am up on th 24th I'll get some pics.

 

looking good so far mate, i saw the shell when i was up at sitec looks like a nice base to work from, there should be a few quick little mk3s out there this year as im hoping mine is going to be completed in the next couple of months. im sure simon and the team up there will make this a great little runner

 

lovely looking project...cant wait for the pics

 

get some more pics up mate! i need some inspiration!!

 

I'll take some pics on the 24th when Im up, I know its a wait but in the mean time Simon might put some up whe things arrive.

 

car looks cracking mate, simon and the boys will do a top job for you.

 

I a sure they will do a great job, I haven't heard a bad thing about the place. What spec is your car? Looks nice.

 

Got this delivered today Adam.





Simon.

 

nice cage mate u going to add a few extra bars to it

 

have you got to take the roof off to fit that cage ??

 

Cheers Simon, the cage looks good. No the roof doesnt have to come off the cage splits into 2 sections. And yes i will be adding more bars.