Black 3 door-restoration- ***UPDATED 13/12/13*!** updated 3 years on LOL
#241
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Thanks dave n pete n coley
Just getti g a few bolts today so hopefully the engine will be in today
Getting my abs block bracket re done as its rusted
And also going to try cleaning up my front hubs today
Just getti g a few bolts today so hopefully the engine will be in today
Getting my abs block bracket re done as its rusted
And also going to try cleaning up my front hubs today
#242
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
finally got the engine and gearbox in the correct position and all mounted up today
Tomorow going to get the rad and intercooler painted and fans cleaned up and then hopefully fitted on wed.
Tomorow going to get the rad and intercooler painted and fans cleaned up and then hopefully fitted on wed.
#247
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Hi Guys,
not done many big things with the car lately.. just a few smaller things.
Still not got the hubs blasted
Got the header tank and powersteering tank in place and plumbed in..
also got my engine loom in- think it looks rather tidy.
not done many big things with the car lately.. just a few smaller things.
Still not got the hubs blasted
Got the header tank and powersteering tank in place and plumbed in..
also got my engine loom in- think it looks rather tidy.
#250
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
should have the rear hubs off tomorrow so going to get them all blasted at the same time..
Should have th leads for the coil pack in tomorrow and fit all the breather sytsem up
My shipment has arrived, hoping to collect the parts this week and get the front suspension in asap..
Still got to change the rea diff and decide on what colour to paint my brakes- suggestions?
Should have th leads for the coil pack in tomorrow and fit all the breather sytsem up
My shipment has arrived, hoping to collect the parts this week and get the front suspension in asap..
Still got to change the rea diff and decide on what colour to paint my brakes- suggestions?
#253
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
thanks Andy..
Well gota sort out all the interior wiring, abs loom, figure out where to mount coil pack and fuel pressure reg, brakes, suspension, interior, sunroof, front & rear bumpers still a while mate prob atleast a month.. trying to get it done asap before the weather gets crap down here wana use it
Well gota sort out all the interior wiring, abs loom, figure out where to mount coil pack and fuel pressure reg, brakes, suspension, interior, sunroof, front & rear bumpers still a while mate prob atleast a month.. trying to get it done asap before the weather gets crap down here wana use it
#260
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Hi Guys..
Lil update..
well im still awaiting my shipment to be released to me so i can get the majority of the car finished.. Was hoping to receive the parts on Friday but unfortunately they hadn't been cleared through customs yet.. so hopefully tomorrow brings some good news.
In the mean time me and my dad decided to get the hubs and TCS's done.. we got the hubs sand blasted last week and we wire brushed the Tca's this morning.
obviously my old man did all the prep and painting as im useless
and heres what the tca's look like now
The hubs im really impressed with.. I dont have a before picture but just picture some cacky hubs and youl get the idea
finished hubs
i think they look spot on..
Now heres a couple pics of it all mounted up in the car-
Next on the agenda was to paint the rear calipers.. so again my dad wire brushed them up and masked of all the pipes etc
now these have been painted but dont have a finished picture yet as they were drying when we called it a night.. Il update the after pic tomorrow.
I also wire brushed my 355mm Discs and degreased my front 6pots and fitted new bleed screws.
there ready to go on the car just awaiting for the suspension to turn up then the brakes will go on.
Its slowly coming together
Lil update..
well im still awaiting my shipment to be released to me so i can get the majority of the car finished.. Was hoping to receive the parts on Friday but unfortunately they hadn't been cleared through customs yet.. so hopefully tomorrow brings some good news.
In the mean time me and my dad decided to get the hubs and TCS's done.. we got the hubs sand blasted last week and we wire brushed the Tca's this morning.
obviously my old man did all the prep and painting as im useless
and heres what the tca's look like now
The hubs im really impressed with.. I dont have a before picture but just picture some cacky hubs and youl get the idea
finished hubs
i think they look spot on..
Now heres a couple pics of it all mounted up in the car-
Next on the agenda was to paint the rear calipers.. so again my dad wire brushed them up and masked of all the pipes etc
now these have been painted but dont have a finished picture yet as they were drying when we called it a night.. Il update the after pic tomorrow.
I also wire brushed my 355mm Discs and degreased my front 6pots and fitted new bleed screws.
there ready to go on the car just awaiting for the suspension to turn up then the brakes will go on.
Its slowly coming together
#273
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
ok got half my shipment picked up today..
ok this box has one of my fave purchases in there-
we need these for the items in the box
and also need this-
and then this
and finally this
to give the finished item as-
also got these for my dads 500-
Also got one of these- really needed it
and heres my lil hepler he ripped up all the card board and bubble wrap
and heres the main thing iv been waiting for for agessss
ok this box has one of my fave purchases in there-
we need these for the items in the box
and also need this-
and then this
and finally this
to give the finished item as-
also got these for my dads 500-
Also got one of these- really needed it
and heres my lil hepler he ripped up all the card board and bubble wrap
and heres the main thing iv been waiting for for agessss
#279
welcome to the centre lock club we are a small but happy group.
I am guessing those are the 16" ones that were for sale recently. I have some spare centres and 17" outers for sale if you need any spares.
I am guessing those are the 16" ones that were for sale recently. I have some spare centres and 17" outers for sale if you need any spares.