Black 3 door-restoration- ***UPDATED 13/12/13*!** updated 3 years on LOL
#211
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Ok so a couple days progress..
Finally got the car jacked up in the air to start the work-
Then today put abit of protection on the front to stop any marks and also got the botom sound deadening in.. my old man spent over a week making the sound deadening and it looks and fits spot on
Before-
After-
Finally got the car jacked up in the air to start the work-
Then today put abit of protection on the front to stop any marks and also got the botom sound deadening in.. my old man spent over a week making the sound deadening and it looks and fits spot on
Before-
After-
#220
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Yh its like looking at a bunch of junk on the floor and thinking hmmm where the hell do i start lol.. Sound deadening was first and then loom today gona cut and shape upper sound deadening and then get the abs pump in hopefully
#225
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
another update today- Not much has changed
But you can see its starting to look more of something than of nothing..
Heather box added and also wiper motor in and upper firewall thingy added
Not sure if to make a sound deadening for the top tho
But you can see its starting to look more of something than of nothing..
Heather box added and also wiper motor in and upper firewall thingy added
Not sure if to make a sound deadening for the top tho
#227
Thread Starter
10K+ Poster!!
iTrader: (1)
Joined: Jul 2006
Posts: 10,753
Likes: 3
From: wolverhampton/ australia
Hi Guys,
Done a lil more work over the last few days..
Got my cross member, anti rollbar, gearbox mount powder coated
Mounted my engine to the cross member
Also had enough time today to mount my Quaife gearbox to the engine
Only issue was that I have a hydraulic clutch and i need to do a slight mod to the gearbox to get the cylinder to sit properly.. Gearbox will be mounted to the Engine tomorrow
Done a lil more work over the last few days..
Got my cross member, anti rollbar, gearbox mount powder coated
Mounted my engine to the cross member
Also had enough time today to mount my Quaife gearbox to the engine
Only issue was that I have a hydraulic clutch and i need to do a slight mod to the gearbox to get the cylinder to sit properly.. Gearbox will be mounted to the Engine tomorrow
#230