BEEFY'S s1 cos- tues 1-5-2012 Project now for sale , breaking -
#802
Too many posts.. I need a life!!
iTrader: (2)
ok well its not really an update as such , karl finished the welding on the topside of the floor, it will be flipped , cleaned n welded ect ect
been speaking to a really gud mate andy aka northernbloke as hes been a little pissed off of late with his v8 escos ,
so we were having a bit of a natter and hes let on he was thinking of selling his wheels ,
so i bought them
the figure will be undisclosed , but lets say they cost less than Ł501 quid lol
what u think ?
kit just taped on for a visual idea
the fronts are a monsterous 8.5 inch wide ,and may require some modding of the inner arches ,
the rears however a a lil wider
some tubs me thinks ??
what u reckon folks ??
beef
been speaking to a really gud mate andy aka northernbloke as hes been a little pissed off of late with his v8 escos ,
so we were having a bit of a natter and hes let on he was thinking of selling his wheels ,
so i bought them
the figure will be undisclosed , but lets say they cost less than Ł501 quid lol
what u think ?
kit just taped on for a visual idea
the fronts are a monsterous 8.5 inch wide ,and may require some modding of the inner arches ,
the rears however a a lil wider
some tubs me thinks ??
what u reckon folks ??
beef
Last edited by CozzyKing; 19-12-2009 at 12:25 AM.
#804
Too many posts.. I need a life!!
iTrader: (2)
Ohhh yeah, seriously lots left to do yet mate but it is coming along nicely.
It is a real shame that the mk4 shell was so bad but look at it this way, the shell that you are building now will be a real gem once it is done and exactly as you want it which makes it even better does it not.
I love the project and I have to say, credit is due to all involved mate and it iss good to see someone with people who are prepared to help and get stuck in when needed
It is a real shame that the mk4 shell was so bad but look at it this way, the shell that you are building now will be a real gem once it is done and exactly as you want it which makes it even better does it not.
I love the project and I have to say, credit is due to all involved mate and it iss good to see someone with people who are prepared to help and get stuck in when needed
#806
Ohhh yeah, seriously lots left to do yet mate but it is coming along nicely.
It is a real shame that the mk4 shell was so bad but look at it this way, the shell that you are building now will be a real gem once it is done and exactly as you want it which makes it even better does it not.
I love the project and I have to say, credit is due to all involved mate and it iss good to see someone with people who are prepared to help and get stuck in when needed
It is a real shame that the mk4 shell was so bad but look at it this way, the shell that you are building now will be a real gem once it is done and exactly as you want it which makes it even better does it not.
I love the project and I have to say, credit is due to all involved mate and it iss good to see someone with people who are prepared to help and get stuck in when needed
deffo mate , im not a super comptent welder , im not a fabricator ect ect ,
but i have the luck of with karl not only being all of the above hes all so me best mate ,
so where alot of folk would wanting left to the own devices ,he takes time out to show me stuff, how to make up templates ,what to factor in ,why he does things that way rather than another ect ect ect ,
and his eye for detail and doing a job right is second to none ,
so where to some it may come accross im building it meself lol im not , im helping , but least i can say ive been invloved, and i know every aspect of the build
it takes as long as it takes, to be 100% right
although i dont see it taking for years , the aim is to have the niggly bits fitted up and mocked and the thing rolling for central day ,
but ill accept charitable donations to keet it built quicker lol !!!
beef
#808
PassionFord Post Whore!!
iTrader: (1)
ok well its not really an update as such , karl finished the welding on the topside of the floor, it will be flipped , cleaned n welded ect ect
been speaking to a really gud mate andy aka northernbloke as hes been a little pissed off of late with his v8 escos ,
so we were having a bit of a natter and hes let on he was thinking of selling his wheels ,
so i bought them
the figure will be undisclosed , but lets say they cost less than Ł501 quid lol
what u think ?
kit just taped on for a visual idea
the fronts are a monsterous 8.5 inch wide ,and may require some modding of the inner arches ,
the rears however a a lil wider
some tubs me thinks ??
what u reckon folks ??
beef
been speaking to a really gud mate andy aka northernbloke as hes been a little pissed off of late with his v8 escos ,
so we were having a bit of a natter and hes let on he was thinking of selling his wheels ,
so i bought them
the figure will be undisclosed , but lets say they cost less than Ł501 quid lol
what u think ?
kit just taped on for a visual idea
the fronts are a monsterous 8.5 inch wide ,and may require some modding of the inner arches ,
the rears however a a lil wider
some tubs me thinks ??
what u reckon folks ??
beef
#813
PassionFord Regular
Join Date: Aug 2003
Location: Teesside
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
It's not so much the size of the wheels it's the offset - they're very much a rwd offset (the outer rims are 6") so wouldn't go near Beefy's unless he had serioulsly wide arch extensions. The wheels were halfway in the engine bay on that shot
Not that he's got a chance of getting em anyway they belong on my Mk1
Not that he's got a chance of getting em anyway they belong on my Mk1
Last edited by Northern Bloke; 19-12-2009 at 11:00 PM.
#814
It's not so much the size of the wheels it's the offset - they're very much a rwd offset (the outer rims are 6") so wouldn't go near Beefy's unless he had serioulsly wide arch extensions. The wheels were halfway in the engine bay on that shot
Not that he's got a chance of getting em anyway they belong on my Mk1
Not that he's got a chance of getting em anyway they belong on my Mk1
i keep tellling them andy
you home fella, if theres any chance you could have a look at my laptop could you give me a ring tommmorow matey ,
beef
#818
sit boo boo sit
iTrader: (4)
just had a few pics sent thru of a cradel the gentleman in question working on at the mo,
have to say the workmanship is outstanding , cnc brackets, no bits of bent angle welded onto a tube here lol !!
pics
trailling arm mount
side on view , note this isnt finished yet ,
quality of the welding is awesome ,
really excited right now ,
beef
have to say the workmanship is outstanding , cnc brackets, no bits of bent angle welded onto a tube here lol !!
pics
trailling arm mount
side on view , note this isnt finished yet ,
quality of the welding is awesome ,
really excited right now ,
beef
so i have followed the thread fully (sort of!!)
as you said does look the bollocks
ps, Jo so happy she got summat to wrap for me
Gotta say folks looks really impressive (the minor details so far are so subtle/natural but will make it stand apart) in the flesh will be one for beefy & co to be proud of
#819
PassionFord Post Whore!!
looking good beefy, who dont the cradle geronimo? If so has he actually made a start on my ibiza yet and if so did you have a look round it and wat does it look like ?
#822
ahh these pics bud i hadnt seen the pics but had read the script as i read it on my bluberry (wont show any pics unless description is attached)
so i have followed the thread fully (sort of!!)
as you said does look the bollocks
ps, Jo so happy she got summat to wrap for me
Gotta say folks looks really impressive (the minor details so far are so subtle/natural but will make it stand apart) in the flesh will be one for beefy & co to be proud of
so i have followed the thread fully (sort of!!)
as you said does look the bollocks
ps, Jo so happy she got summat to wrap for me
Gotta say folks looks really impressive (the minor details so far are so subtle/natural but will make it stand apart) in the flesh will be one for beefy & co to be proud of
ohh and thanks for the plonk !!!
what you want to know fella,
hit the PM button