ZAKSPEED ESCORT 4x4 500+HP (328mm rear discs machined rear spoiler profiles here )
#2328
Excellent as all ways Andy! Missed out on any updates since beggining of January as Ive been working away. Has been a good read over the last 10 pages or so! Floor and latest version of the tunnel () are looking great. I am very liking all the trick parts like the blade A.R.Bs, chassis engine mounts, WRC cross member etc all things I want for mine when I get to that stage. Keep up the good work Andy
#2329
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2008
Posts: 6,302
Likes: 3
From: Sunny Devon
started to make up a new steering column here is the outer sleeve
these are he bearing race holders that fit inside the outer sleeve & welds into the bulk head
bulk head spherical bearing so i can adjust column up and down
column mocked up
with bulk head bearing
trial fit
fitted with original switch gear & ignition barrel
steering wheel fitted
just got to weld it all up & make a support bracket
these are he bearing race holders that fit inside the outer sleeve & welds into the bulk head
bulk head spherical bearing so i can adjust column up and down
column mocked up
with bulk head bearing
trial fit
fitted with original switch gear & ignition barrel
steering wheel fitted
just got to weld it all up & make a support bracket
Last edited by andy escos; 23-05-2011 at 08:42 PM.
#2341
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2008
Posts: 6,302
Likes: 3
From: Sunny Devon
thanks Jay glad you like it .
i like drilling holes in bits for two reasons
1, it gives you more detail .
2,it makes it lighter which is good .
what would be really good is to get you ,Coley,Dave ,Nugnah all at the same show would make a bloody good magazine feature mate.
#2345
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2008
Posts: 6,302
Likes: 3
From: Sunny Devon
steering column all finished ,i can set it to 3 different heights .
i had to take Richies old engine block out of my car as he sold it to jacko996 (dave)as his engine had a cracked mains journal .
but he did lend me his other small turbo block which i put back in last night ,so i might look at fitting the chassis engine mounts over the week end .
i had to take Richies old engine block out of my car as he sold it to jacko996 (dave)as his engine had a cracked mains journal .
but he did lend me his other small turbo block which i put back in last night ,so i might look at fitting the chassis engine mounts over the week end .
#2347
PassionFord Post Troll
iTrader: (2)
Joined: May 2003
Posts: 3,065
Likes: 2
From: In my garage, coventry
Come on Andy im missing the updates
One of the only things i come on this site for these days,
unless i want to read about the death of an alive weirdo of find out whats been destroyed
bring back the old school at least IMA was a laugh,
One of the only things i come on this site for these days,
unless i want to read about the death of an alive weirdo of find out whats been destroyed
bring back the old school at least IMA was a laugh,
#2348
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2008
Posts: 6,302
Likes: 3
From: Sunny Devon
no sorry Dave i forgot to take one before i took it to work to get it tigged up
im glad you like it i,ll try & do more updates
the death of the alive weirdo is just not right but the i destroyed threads are real funny
small up date welded mounts
check out the tig welding
i also cleaned up the inner wings ready to weld them on
ally profiles bolted in place
steering column brackets tacked on
tunnel all blanked off & welded
bit by bit im getting there.
the death of the alive weirdo is just not right but the i destroyed threads are real funny
small up date welded mounts
check out the tig welding
i also cleaned up the inner wings ready to weld them on
ally profiles bolted in place
steering column brackets tacked on
tunnel all blanked off & welded
bit by bit im getting there.
#2358
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2008
Posts: 6,302
Likes: 3
From: Sunny Devon
up date time again made another brace to hold the engine from bell housing mounts
steering column bracket tig welded
modified engine mounts
exhaust side engine mount in
its still a tight fit
passenger side in
what do you think then any good .
steering column bracket tig welded
modified engine mounts
exhaust side engine mount in
its still a tight fit
passenger side in
what do you think then any good .