Project "ASBO" XR2
#128
Lucifer II - 666
Those are the best pic's so far and it looks awsome
#132
Regular Contributor
Join Date: Nov 2004
Location: Ipswich
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Ive been stripping the mk1 today, gonna do a few hours 2moro aswell! I wish my shell was as good as yours
#133
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2003
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
I did try calling you but I think I have the wrong number on my phone from when I transfered them over.
Im going up to the next track day although its fully booked already so if you wanna lift up there, let me know
Im going up to the next track day although its fully booked already so if you wanna lift up there, let me know
#135
Regular Contributor
Join Date: Nov 2004
Location: Ipswich
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Deffo mate, let me know when it is! have pm'd you my number!
#140
Rebuilds @Projects
The car was not built to a standard I liked so the design begun. It was entirely removed inside and out and essentially all the bad minutes of which there are lots are tardily been put right as and when monetary resource appropriate.
_________________________________________________
james
Wide Circles
_________________________________________________
james
Wide Circles
#150
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2003
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Well the Xenons are fitted 8)
Neatly located Ballasts....... and crackled washer bottle in the 2nd pic
New boot inner panel made from aluminium
Modified rear door cards
and it may not seem much but the little clips on top of the headlights were in a bad way. He's left them in a tank of solution of some sort and they are now like new although will be getting a dusting of hammerite asap
Plans now are to re locate the HUD so it sits higher as the steering wheel protrudes alot of it, and also spray the door cards black.
Im also in 2 minds about replacing the fuel cell with another unbodged one and not having the rear window fuel cap.
Neatly located Ballasts....... and crackled washer bottle in the 2nd pic
New boot inner panel made from aluminium
Modified rear door cards
and it may not seem much but the little clips on top of the headlights were in a bad way. He's left them in a tank of solution of some sort and they are now like new although will be getting a dusting of hammerite asap
Plans now are to re locate the HUD so it sits higher as the steering wheel protrudes alot of it, and also spray the door cards black.
Im also in 2 minds about replacing the fuel cell with another unbodged one and not having the rear window fuel cap.
#152
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2003
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Right a small update.
Last week I removed all the inner door cards that my brother had made for me to respray. I turned the greenhouse into a mini spray booth which ended up being shit with dripping condensation.
Still I soldiered on with a light coat nearly every day last week after drying them off to get my desired finish.
Today I managed to squeeze myself into the back of my car to refit them, anyone that knows me knows Im not exactly small and the gap I managed to squeeze into, Im beginning to wonder if I should join a circus :S
I managed to squeeze through the lower hole of the cage to sit where the rear bench should be with my head and one arm through the upper part of the cage
Anyway, the aluminium door cards now fitted after lots of swearing and bruised ribs
The HUD after being mounted on a small arm so its now visible whilst driving without ducking to look over the steering wheel or stretching to look over it.
And one from further away so I can be an attention whore with my Defi's
So after lots of messing about this morning and a photoshoot looming, I thought I best get the car washed. I hate washing my car at the best of times so the local Kosavan car cleaning outfit at my closest Homebase was given the job. They have cleaned my Fiesta ST in the past and for 6 quid, they dont do a bad job.
The only problem now is, its dirty again from the drive home as I cant seem to drive the bloody thing slowly
Last week I removed all the inner door cards that my brother had made for me to respray. I turned the greenhouse into a mini spray booth which ended up being shit with dripping condensation.
Still I soldiered on with a light coat nearly every day last week after drying them off to get my desired finish.
Today I managed to squeeze myself into the back of my car to refit them, anyone that knows me knows Im not exactly small and the gap I managed to squeeze into, Im beginning to wonder if I should join a circus :S
I managed to squeeze through the lower hole of the cage to sit where the rear bench should be with my head and one arm through the upper part of the cage
Anyway, the aluminium door cards now fitted after lots of swearing and bruised ribs
The HUD after being mounted on a small arm so its now visible whilst driving without ducking to look over the steering wheel or stretching to look over it.
And one from further away so I can be an attention whore with my Defi's
So after lots of messing about this morning and a photoshoot looming, I thought I best get the car washed. I hate washing my car at the best of times so the local Kosavan car cleaning outfit at my closest Homebase was given the job. They have cleaned my Fiesta ST in the past and for 6 quid, they dont do a bad job.
The only problem now is, its dirty again from the drive home as I cant seem to drive the bloody thing slowly
#157
15000
Join Date: Oct 2008
Location: highlands ( Brora )
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
NICE XR
hey goney sorry if that is not ur name im new to this just thought iwould say job well done and i want u to have a look at this pic im trying to get molds made for my mk1 xr fez its running full spaced frame rwd busa turbo so need wide arch for traction
have located front bumper from germony but i will get there in the end
cheers doc
have located front bumper from germony but i will get there in the end
cheers doc
#158
I've found that life I needed.. It's HERE!!
Thread Starter
Join Date: May 2003
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Well it seems my piston rings are worn. The car only made 176.6bhp which although respectable should of been more.
Peak power is made at 7000 rpm
Engine will probably be removed over winter and rebuilt back up, quite possibly with new pistons and rods.
Quick pic of the power graph
Peak power is made at 7000 rpm
Engine will probably be removed over winter and rebuilt back up, quite possibly with new pistons and rods.
Quick pic of the power graph
#160
PassionFord Post Whore!!
Join Date: May 2004
Location: Near Ipswich.
Posts: 4,976
Likes: 0
Received 0 Likes
on
0 Posts
Gutting, whats made the rings wear so quickly?
Carnt belive how well the car goes with 170bhp though.
I am sure it will be back soon bigger and better.
Carnt belive how well the car goes with 170bhp though.
I am sure it will be back soon bigger and better.