Project Money Pit... Escort track car, Check out the front end! 26/06/2009
#81
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well i made it to FITP, breaking only a gearbox mount and knocking my tracking out thanks to the UK's wonderful roads ![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![](https://i41.photobucket.com/albums/e268/nhb19/FITP/DSCF3127.jpg)
![](https://i297.photobucket.com/albums/mm212/donkey077/DSCF5348.jpg)
then disaster struck and my car cut out whilst it was sat idling, it wouldn't restart, and the fuel pump wasn't priming.
borrowed a multimeter from TOTD and confirmed the pump had shat its pants - after having been used for around 300miles from brand new
I'll be taking that up with the manufacturer.
thus
![](https://i3.photobucket.com/albums/y81/GraemeLeighfield/FITP%2009/IMG_3934.jpg)
![](https://i3.photobucket.com/albums/y81/GraemeLeighfield/FITP%2009/IMG_3988.jpg)
and home on the recovery truck it went![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
anyway, took the tank off today covered myself in petrol, modified the pump wiring hole to be a pump / sender removal hole.
got an rs2000 pump coming tomorrow morning so after my job interview tomorrow morning I'll get back on things and get it going again... bloody fords![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
I still smell of petrol and i had my overalls on
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![](https://i41.photobucket.com/albums/e268/nhb19/FITP/DSCF3127.jpg)
![](https://i297.photobucket.com/albums/mm212/donkey077/DSCF5348.jpg)
then disaster struck and my car cut out whilst it was sat idling, it wouldn't restart, and the fuel pump wasn't priming.
borrowed a multimeter from TOTD and confirmed the pump had shat its pants - after having been used for around 300miles from brand new
I'll be taking that up with the manufacturer.
thus
![](https://i3.photobucket.com/albums/y81/GraemeLeighfield/FITP%2009/IMG_3934.jpg)
![](https://i3.photobucket.com/albums/y81/GraemeLeighfield/FITP%2009/IMG_3988.jpg)
and home on the recovery truck it went
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
anyway, took the tank off today covered myself in petrol, modified the pump wiring hole to be a pump / sender removal hole.
got an rs2000 pump coming tomorrow morning so after my job interview tomorrow morning I'll get back on things and get it going again... bloody fords
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
I still smell of petrol and i had my overalls on
![Raz](https://passionford.com/forum/images/smilies/tongue.gif)
#83
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
yesterday's work
Today did a few bits, put the new wheels on took it off axle stands put the coil packs and intake back on and got it out the garage
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01742.jpg)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01743.jpg)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01744.jpg)
Also started to take the tar up off the floor
have a huge blister on the palm of my hand ![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01741.jpg)
next few days I'll be cracking on with:
painting the morettes, grille and splitter
taking the rest of the tar up
perhaps fitting some of the guages I've had for the last two years![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
today
Remembered why i love this colour while the sun was shining, looks good despite needing a clean
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01748.jpg)
More sound proofing came up today - but not without a fight![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01751.jpg)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01752.jpg)
also removed the patch on the roof after I binned this heavy fecker:
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01747.jpg)
i was going to replace it with a carbon fibre plate rivited on but carbon isn't flexible enough so it'll be a piece of painted aluminium
Also for the first time in a couple of years i got the rattle cans out and colour coded my morrettes and smooth cosworth grill
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01749.jpg)
and a front shot, the grille is only half fitted and a bit wonky but its going to look hard![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Today did a few bits, put the new wheels on took it off axle stands put the coil packs and intake back on and got it out the garage
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01742.jpg)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01743.jpg)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01744.jpg)
Also started to take the tar up off the floor
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01741.jpg)
next few days I'll be cracking on with:
painting the morettes, grille and splitter
taking the rest of the tar up
perhaps fitting some of the guages I've had for the last two years
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
today
Remembered why i love this colour while the sun was shining, looks good despite needing a clean
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01748.jpg)
More sound proofing came up today - but not without a fight
![Rolling Eyes](https://passionford.com/forum/images/smilies/icon_rolleyes.gif)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01751.jpg)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01752.jpg)
also removed the patch on the roof after I binned this heavy fecker:
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01747.jpg)
i was going to replace it with a carbon fibre plate rivited on but carbon isn't flexible enough so it'll be a piece of painted aluminium
Also for the first time in a couple of years i got the rattle cans out and colour coded my morrettes and smooth cosworth grill
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01749.jpg)
and a front shot, the grille is only half fitted and a bit wonky but its going to look hard
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](https://i38.photobucket.com/albums/e105/escortstreetracer/DSC01750.jpg)
#98
Too many posts.. I need a life!!
iTrader: (1)
Join Date: Aug 2006
Location: Newcastle upon tyne
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
looks pretty good.. it would deffo look better with the bulge bonnet on it.. deffo like those arch extensions..what did you get them off or did you actually make them... so are you putting a turbo lump back in once you get enough cash???
#99
Too many posts.. I need a life!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
would riveting a panel where the sunroof was be a good enough seal? Could water seap in the gaps or will there not be a gap?
I was planning on doing something like that myself but not found the courage yet lol.
I was planning on doing something like that myself but not found the courage yet lol.
#101
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
> turbo engine seems unlikely, you don't need much power to go round a track quickly. The arch extension were made for me by fibresports, they are custom cyclone arches made extra wide afaik they still have the moulds.
>> The sunroof panel will be covered with an alloy plate which will be sealed with tigerseal or similar the rivits will just be to make it easier.
>>> hell i'll sell yoiu the whole car if you like it that much
>> The sunroof panel will be covered with an alloy plate which will be sealed with tigerseal or similar the rivits will just be to make it easier.
>>> hell i'll sell yoiu the whole car if you like it that much
#102
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Car is currently in the for sale section and on pistonheads
http://www.pistonheads.com/sales/1605059.htm
http://www.pistonheads.com/sales/1605059.htm
#106
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
#108
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
So today I bought this:
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00010.jpg)
looks like a big pile of scrap interior, but its not:
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00011.jpg)
so I've put them in but had some trouble with the seat belts and a few other bits so they'll have to come out again soon
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00012.jpg)
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00010.jpg)
looks like a big pile of scrap interior, but its not:
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00011.jpg)
so I've put them in but had some trouble with the seat belts and a few other bits so they'll have to come out again soon
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00012.jpg)
![](http://i38.photobucket.com/albums/e105/escortstreetracer/IMG-20110312-00013.jpg)
#110
Project Money Pit
Thread Starter
Join Date: Apr 2005
Location: The Dark Side
Posts: 1,209
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
i know, odd given that i was ready to sell it for less than it was worth. still might sell it, but for now i want to return it to a road worthy state and get it mot'd
Thread
Thread Starter
Forum
Replies
Last Post
Wilsfoci
Restorations, Rebuilds & Projects.
15
30-03-2016 10:26 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM