Zetec Turbo on Megasquirt, new Turbo arrived. GT2871R :P
#82
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
But ass i said, my old pump wasn't all that anyway
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#84
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well, finally got started with the MS wiring loom.
Put the MS ecu in the glovebox, made a sort of relay board and sorted the wiring..
Now just plug all the sensors and make a nice injector loom.
Lots of thanks to JeroentjeRS for the help sofar and the pics![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![](http://www.mijnalbum.nl/Foto-IZZKT6Q3.jpg)
![](http://www.mijnalbum.nl/Foto-ELEGR4TO.jpg)
![](http://www.mijnalbum.nl/Foto-JN6JAJS3.jpg)
![](http://www.mijnalbum.nl/Foto-VBB47QUC.jpg)
![](http://www.mijnalbum.nl/Foto-JQFIS4AY.jpg)
Put the MS ecu in the glovebox, made a sort of relay board and sorted the wiring..
Now just plug all the sensors and make a nice injector loom.
Lots of thanks to JeroentjeRS for the help sofar and the pics
![Clap](https://passionford.com/forum/images/smilies/9c-clap.gif)
![](http://www.mijnalbum.nl/Foto-IZZKT6Q3.jpg)
![](http://www.mijnalbum.nl/Foto-ELEGR4TO.jpg)
![](http://www.mijnalbum.nl/Foto-JN6JAJS3.jpg)
![](http://www.mijnalbum.nl/Foto-VBB47QUC.jpg)
![](http://www.mijnalbum.nl/Foto-JQFIS4AY.jpg)
![](http://www.mijnalbum.nl/Foto-BGRCJTWO.jpg)
#85
PassionFord Post Troll
Join Date: Jan 2006
Location: You will never know. Now fook off
Posts: 3,089
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Glad to help mate. Shame about the rain. But soon it will be mapping time
But as i am not there to help you connect all the wires. Don't fuck it up![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Ow and thanks for the beer. Really needed it get a good sleep
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
![Top](https://passionford.com/forum/images/smilies/smile011.gif)
#87
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
It's one off those brandless chinese intercoolers bought locally.
Just giving it a try, should be good but if i'm not pleased i can always buy one off those expensive ones from a known brand
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
#88
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Well, managed to do some work on the RST between the rain...
First removed the radiator and put on the stage 3 t3 turbo in steds of the standard one.
Then placed the 10" fans on the radiator and put it back in the car...
Finally got started soldering in the wiring loom till it was dark...
Some piccas..
![](http://www.mijnalbum.nl/Foto-3JBLJ6KJ.jpg)
![](http://www.mijnalbum.nl/Foto-R3MIYOIB.jpg)
![](http://www.mijnalbum.nl/Foto-W6GQ3YOQ.jpg)
First removed the radiator and put on the stage 3 t3 turbo in steds of the standard one.
Then placed the 10" fans on the radiator and put it back in the car...
Finally got started soldering in the wiring loom till it was dark...
Some piccas..
![](http://www.mijnalbum.nl/Foto-3JBLJ6KJ.jpg)
![](http://www.mijnalbum.nl/Foto-R3MIYOIB.jpg)
![](http://www.mijnalbum.nl/Foto-W6GQ3YOQ.jpg)
![](http://www.mijnalbum.nl/Foto-I6MMEVCA.jpg)
#92
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
#93
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Put in the Intercooler today... just to find out now i can't close the bonnet, lol.
Have to lower it a little tomorrow and cut out half the frontbumper...![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
D:
Have to lower it a little tomorrow and cut out half the frontbumper...
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://www.mijnalbum.nl/Foto-8NBIH3L3.jpg)
#100
Too many posts.. I need a life!!
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Drove past your house 2day, but your lazy ass wasn't working on the car, but the front looks nice!!!
Last edited by Willem; 25-03-2008 at 09:16 AM.
#101
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
#103
YES I KNOW I CANT SPELL
Join Date: Mar 2008
Location: chingford e4
Posts: 5,271
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi all im new to passion ford i have been told to join by simon (performance ford last mounth zetec turbo xr2) im well in to my fords and im at the moment building a zt fiesta si (well trying to simons xr2 is keeping my garage sapce warm with his gearbox problems) im going down the route of megasquirt coz i luv a bit of diy buy after buying the ecu i read up on it and it all seems a bit scairy? any idears can some one mabe help me as i dont fancy melting any think?
#104
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
well added the tubes for the intercooler , the airfilter and made the charge carrier "efi ready"
![](http://www.mijnalbum.nl/Foto-6FG8CLJK.jpg)
![](http://www.mijnalbum.nl/Foto-ORNVYCJD.jpg)
![](http://www.mijnalbum.nl/Foto-XICEQCQA.jpg)
So, now just weld on the nut for the lambda and put in the cps i thought..... but my engine builder removed the cps holder as i wasn't planning to go efi and he needed it i reccon.....
So to put another in have to remove the gearbox again ... :S... well nice excuse to put my AP paddle clutch in :P
![](http://www.mijnalbum.nl/Foto-6FG8CLJK.jpg)
![](http://www.mijnalbum.nl/Foto-ORNVYCJD.jpg)
![](http://www.mijnalbum.nl/Foto-XICEQCQA.jpg)
So, now just weld on the nut for the lambda and put in the cps i thought..... but my engine builder removed the cps holder as i wasn't planning to go efi and he needed it i reccon.....
So to put another in have to remove the gearbox again ... :S... well nice excuse to put my AP paddle clutch in :P
#106
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Planned on placing the CPS holder this weekend so i arranged a garage and began yesterday..
All the work for this little bugger.....
![](http://www.mijnalbum.nl/Foto-NREPAYIC.jpg)
As there was an AP 4 paddle clutch laying arround i could replace the ap fast road set at the same time.
![](http://www.mijnalbum.nl/Foto-JPUPKGJN.jpg)
Placed nicely centered
![](http://www.mijnalbum.nl/Foto-YJBSNKZM.jpg)
Messy :P
![](http://www.mijnalbum.nl/Foto-N8CCLPIO.jpg)
Box from the gearboxman ready to me placed![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://www.mijnalbum.nl/Foto-PVD7CQA8.jpg)
Also welded in the nut in the exhaust for the wideband lambda.
Towed it home today so i can be on the programming of the ecu upcoming weeks finally :P:P
All the work for this little bugger.....
![](http://www.mijnalbum.nl/Foto-NREPAYIC.jpg)
As there was an AP 4 paddle clutch laying arround i could replace the ap fast road set at the same time.
![](http://www.mijnalbum.nl/Foto-JPUPKGJN.jpg)
Placed nicely centered
![](http://www.mijnalbum.nl/Foto-YJBSNKZM.jpg)
Messy :P
![](http://www.mijnalbum.nl/Foto-N8CCLPIO.jpg)
Box from the gearboxman ready to me placed
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![](http://www.mijnalbum.nl/Foto-PVD7CQA8.jpg)
Also welded in the nut in the exhaust for the wideband lambda.
Towed it home today so i can be on the programming of the ecu upcoming weeks finally :P:P
#108
PassionFord Regular
Join Date: Sep 2006
Location: Lithuania (whereTF is that?) :)
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Mine's running already
But still didn't map it. It's on some map that was in default files. Maybe you gregor have a good example of ignition table from our type of setup?
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
#109
Part of the Furniture
Join Date: May 2004
Location: The Netherlands
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Ey Greg,
This looks great mate! Hope your EFI conversion turns out to be good but I think it will.
Good luck with the built and keep us updated.
Maybe I'll be converting mine too in the future but won't be aiming for 300BHP though.
For the time being I haven't got time to work on my car though......
This looks great mate! Hope your EFI conversion turns out to be good but I think it will.
Good luck with the built and keep us updated.
Maybe I'll be converting mine too in the future but won't be aiming for 300BHP though.
For the time being I haven't got time to work on my car though......
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#110
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Ey Greg,
This looks great mate! Hope your EFI conversion turns out to be good but I think it will.
Good luck with the built and keep us updated.
Maybe I'll be converting mine too in the future but won't be aiming for 300BHP though.
For the time being I haven't got time to work on my car though......![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
This looks great mate! Hope your EFI conversion turns out to be good but I think it will.
Good luck with the built and keep us updated.
Maybe I'll be converting mine too in the future but won't be aiming for 300BHP though.
For the time being I haven't got time to work on my car though......
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
Thanks mark,
But it isn't a straight forward job and i'm having some problems.... perhaps ecu related
![Sad](https://passionford.com/forum/images/smilies/icon_sad.gif)
Don't think it will be ready for lelytown
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Did you use the ford 36-1 file in default??
Mine doesn't seem to get the cps signal in some way so nothing works
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#111
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
New update.. well... seems my MS has a fault in it....
I ordered it assembled just to prefent problems like this...
Well have to get that sorted first grrrrrrrrrr
I ordered it assembled just to prefent problems like this...
Well have to get that sorted first grrrrrrrrrr
#112
PassionFord Regular
Join Date: Sep 2006
Location: Lithuania (whereTF is that?) :)
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Aren't you using EDIS module?
#113
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
My problem is when i crank the engine i don't get an rmp in megatune whatever i do with the map settings.
Looks one of the component has been to hot while soldering ( or whatever that's called).
Bought a new component today and will put that in this weekend....
A mate off mine will come over with his MS to check if it's responding in my car.
I'm not using edis...
I've got 2 ignition coildrivers build in the ms so the ms is directly connected to the coil without the edis module.
#114
PassionFord Regular
Join Date: Sep 2006
Location: Lithuania (whereTF is that?) :)
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
#115
PassionFord Post Troll
Join Date: Jan 2006
Location: You will never know. Now fook off
Posts: 3,089
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
If you use Edis You wouldn't have your problem. You only had to connect two wires to the MS and no risk of having anything getting to hot in the MS as all the stress goes to the EDIS module only PIP and SAW signals are getting to and out of the MS. I did it like that and I had no problem with the ignition from the day one I instaled it, but I fried some things too, so that's almost normal
Hope You'll get there some day
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
![Surprised](https://passionford.com/forum/images/smilies/bigcry.gif)
#116
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
If you use Edis You wouldn't have your problem. You only had to connect two wires to the MS and no risk of having anything getting to hot in the MS as all the stress goes to the EDIS module only PIP and SAW signals are getting to and out of the MS. I did it like that and I had no problem with the ignition from the day one I instaled it, but I fried some things too, so that's almost normal
Hope You'll get there some day
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)
Problem is not it got to hot when installing the ms but when the ms was build. ( not by me :P )
Direct Colidrivers should work without problem.
But the problem is i´m not even getten a cps (rpm) signal in megatune so obviously i got no spark but that's not the problem area in my oppinion.
I'll get it sorted butt it'will take some searching for the problekm,, but hey that's all part off the hobby
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#117
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2004
Location: Netherlands
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I notices today that when i crank it all meters go to zero in megatune....
Hooked up a volt meter to the ms and when i crank it i got no voltage on it....
I did the wiring according to the schedule i got with the ms.
So the yellow powerlead when it's on contact powers everything but when i crank it there's no power on this...
Schould i connect the cranking puls lead as well to the ms so i got power to it when i'm cranking?
Stupid i never saw this before..
Hooked up the MS to a constant powerlead and got a nice 300 rpm when cranking
Hooked up a volt meter to the ms and when i crank it i got no voltage on it....
I did the wiring according to the schedule i got with the ms.
So the yellow powerlead when it's on contact powers everything but when i crank it there's no power on this...
Schould i connect the cranking puls lead as well to the ms so i got power to it when i'm cranking?
Stupid i never saw this before..
Hooked up the MS to a constant powerlead and got a nice 300 rpm when cranking
![Big Grin](https://passionford.com/forum/images/smilies/icon_mrgreen.gif)
#120
PassionFord Regular
Join Date: Sep 2006
Location: Lithuania (whereTF is that?) :)
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Grin](https://passionford.com/forum/images/smilies/icon_smile.gif)
![Big Grin](https://passionford.com/forum/images/smilies/icon_biggrin.gif)