F2 Maxi Build Lucifer II - RL7's and a BIG Turbo!
25-02-2015, 06:13 PM
#1442
Lucifer II - 666
Thread Starter
25-02-2015, 09:06 PM
#1444
Lucifer II - 666
Thread Starter
Torques sell good ones just keep putting of buying um lol
26-02-2015, 09:57 PM
#1445
Lucifer II - 666
Thread Starter
Tonight didn't go as planned, thought I'd get more done!
Spent 3 1/2 hours making and fitting one window lol
The Perspex window is about 3/4 inches smaller on two sides as it doesn't form like the glass does, so every time I had cut a bit off I tried to fit again with the use of strimmer wire in the rubber, fingers are now bruised and cut to fuck.
But looks good...
Spent 3 1/2 hours making and fitting one window lol
The Perspex window is about 3/4 inches smaller on two sides as it doesn't form like the glass does, so every time I had cut a bit off I tried to fit again with the use of strimmer wire in the rubber, fingers are now bruised and cut to fuck.
But looks good...
27-02-2015, 07:34 PM
#1446
Lucifer II - 666
Thread Starter
Few more hours today as I managed to finish all customers cars by 3.
Collected my bespoke bits I had made from stainless steel.
5/8BSP female to JIC-10 male, so I can run JIC straight from the scavenger pump.
Love my engineers, they'll make anything I ask/draw for them.
So, started piping up the sump to scavenger pump, the one which turns back on itself will change as I need to get a 180 degree -12, only hada 90 degree spare today.
Also fitted the 1/2BSP to JIC-12 for the remote oil filter..
More soon.
Collected my bespoke bits I had made from stainless steel.
5/8BSP female to JIC-10 male, so I can run JIC straight from the scavenger pump.
Love my engineers, they'll make anything I ask/draw for them.
So, started piping up the sump to scavenger pump, the one which turns back on itself will change as I need to get a 180 degree -12, only hada 90 degree spare today.
Also fitted the 1/2BSP to JIC-12 for the remote oil filter..
More soon.
27-02-2015, 08:43 PM
#1448
Lucifer II - 666
Thread Starter
Thanks Glenn, they'll also servable purpose in cooling the boot area when I add ducting as lot going on in boot so will get warm, oil tank annd fuel in there too.
Last edited by Minirotty; 27-02-2015 at 10:41 PM.
28-02-2015, 01:44 PM
#1449
Lucifer II - 666
Thread Starter
Well today was frustrating!
Got a phone call yesterday telling me to collect my comps today at 11, got there, 50 mile round trip and they weren't ready, could of knocked someone out tbh!
Had a chat with a few nerd mates on Facebook last night and found what oil filter I could get which would be thin and black lol
More in the week.
I did get a phone call today off of a mate who was trying to calibrate his Omex600 and RaceTech2 dash, his software is telling him he needs a more updated Omex600?
Mine is 70A version Omex, anyone else have trouble calibrating theirs to Omex?
As I haven't tried the calibration yet, he is calling Omex on Monday.
Got a phone call yesterday telling me to collect my comps today at 11, got there, 50 mile round trip and they weren't ready, could of knocked someone out tbh!
Had a chat with a few nerd mates on Facebook last night and found what oil filter I could get which would be thin and black lol
More in the week.
I did get a phone call today off of a mate who was trying to calibrate his Omex600 and RaceTech2 dash, his software is telling him he needs a more updated Omex600?
Mine is 70A version Omex, anyone else have trouble calibrating theirs to Omex?
As I haven't tried the calibration yet, he is calling Omex on Monday.
01-03-2015, 06:38 PM
#1451
Lucifer II - 666
Thread Starter
I'll keep that in mind bud, cheers.
02-03-2015, 08:01 PM
#1452
Lucifer II - 666
Thread Starter
COMPs are done, Post Box Red! No tyres yet though.
I am looking to fit semi slicks or slicks, whichever bargain pops up first as I have already got wets and roads tyres on other alloys.
More soon.
I am looking to fit semi slicks or slicks, whichever bargain pops up first as I have already got wets and roads tyres on other alloys.
More soon.
07-03-2015, 02:28 PM
#1453
Lucifer II - 666
Thread Starter
Got some Toyo Proxies fitted today, will get some slicks/semi slicks fitted to another set of wheels.
I love the look of it now!
I love the look of it now!
Last edited by Minirotty; 07-03-2015 at 02:30 PM.
08-03-2015, 10:46 AM
#1455
Lucifer II - 666
Thread Starter
Cheers bud
The following users liked this post:
Minirotty (08-03-2015)
The following users liked this post:
Minirotty (08-03-2015)
08-03-2015, 11:44 AM
#1458
Lucifer II - 666
Thread Starter
Thanks bud, I will make it road legal at some point just so I can get the private plate allocated to the car, I'm sure I will also drive it on the road once it's legal but I can't see it being very often.
Anthracite
21-03-2015, 07:08 PM
#1459
Lucifer II - 666
Thread Starter
Not a massive update as spent my lazy day washing one of my work vans lol
Pics of the work van lol
So to the update, Wozza popped by again to see me and brought with him my Carbon Fibre WRC roof vent, chuffed with it, better than the old Fibreglass one I had fitted.
Just needs flatting and lacquering.
More soon.
Pics of the work van lol
So to the update, Wozza popped by again to see me and brought with him my Carbon Fibre WRC roof vent, chuffed with it, better than the old Fibreglass one I had fitted.
Just needs flatting and lacquering.
More soon.
21-03-2015, 07:25 PM
#1460
PassionFord Post Troll
Great project mate comps look wicked 
The following users liked this post:
Minirotty (21-03-2015)
21-03-2015, 08:15 PM
#1461
Lucifer II - 666
Thread Starter
22-03-2015, 11:30 AM
#1463
Lucifer II - 666
Thread Starter
Thanks bud, yeh the ramps a good bit of kit.
Didn't realise how much carbon I had now until me and Wozza looked yesterday lol
Dash inset
Dash switch panel
Door cars front and rear
Roof vent
Rear spats
Fog light blanks
A mate is also making me some carbon throttle body trumpets too.
Bit addictive enit lol
Didn't realise how much carbon I had now until me and Wozza looked yesterday lol
Dash inset
Dash switch panel
Door cars front and rear
Roof vent
Rear spats
Fog light blanks
A mate is also making me some carbon throttle body trumpets too.
Bit addictive enit lol
05-05-2015, 08:00 PM
#1464
Lucifer II - 666
Thread Starter
Life had gotten in the way of this again atm! God knows when I'll manage to get back on it.
26-05-2015, 09:50 PM
#1465
Lucifer II - 666
Thread Starter
Update
Better than nothing lol
Better than nothing lol
23-07-2015, 08:42 AM
#1466
Lucifer II - 666
Thread Starter
More wheels ...
26-07-2015, 01:24 PM
#1467
Lucifer II - 666
Thread Starter
Decided to build a turbo engine for this now too...
Only because things have come along at the right price.
Nissan Pulsar GTr inlet CNC machined to match RS head -
GaryCrazyCage is making me a manifold also -
Turbo rated to 500+ BHP
Some Maxi inner wing guards also -
Only because things have come along at the right price.
Nissan Pulsar GTr inlet CNC machined to match RS head -
GaryCrazyCage is making me a manifold also -
Turbo rated to 500+ BHP
Some Maxi inner wing guards also -
The following users liked this post:
Minirotty (26-07-2015)
26-07-2015, 08:25 PM
#1469
PassionFord Post Troll
Looking wicked that mate 
The following users liked this post:
Minirotty (26-07-2015)
The following users liked this post:
Minirotty (26-07-2015)
26-07-2015, 10:39 PM
#1471
Lucifer II - 666
Thread Starter
27-07-2015, 07:15 PM
#1473
Lucifer II - 666
Thread Starter
I'll get the most out of the N/A first.
19-12-2015, 12:48 AM
#1474
Lucifer II - 666
Thread Starter
cover came off yesterday as car moved to new location
me with my beast L2
me with my beast L2
The following 2 users liked this post by Minirotty:
turbo m (19-12-2015),
visa_broke (19-12-2015)
19-12-2015, 06:37 AM
#1476
Advanced PassionFord User
Nice to see you up and about mate.
03-01-2016, 06:20 AM
#1479
Lucifer II - 666
Thread Starter
Thanks lads.
28-02-2016, 10:40 PM
#1480
Lucifer II - 666
Thread Starter
Gary finished my manifold!!!
In the post to me tomorrow.
Awesome looking thing.
In the post to me tomorrow.
Awesome looking thing.