4x4 combi van,................ R.I.P...........
#1
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
4x4 combi van,................ R.I.P...........
Hi,bin looking on ere for about a year now & im new to all this & fort id post up sum pics of my van.let us know what you all think?
Last edited by combi van man; 03-09-2009 at 10:01 PM.
#7
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
Originally Posted by Lee1
The wheels suit it what make are they?
Trending Topics
#8
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
Originally Posted by LoOnIe!!
miss my one, was all painted, 240 hp and got nicked in april! ( this is a old photo!)
#12
Originally Posted by combi van man
how much is it?if its cheap & not 2 nacked snap it up cause they getting rare & jus about every 1 wants 1.
#13
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
Originally Posted by danny_boy699
looks nice mate
what does it say on the front screen
what does it say on the front screen
had kno were else to put it
do u fancy a truck.made loads of people laugh
when had the heap.then swaped it for this
#15
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
find a few more pics so thought id post them.
then i got offerd a cossy kit for Ł150 on a escort cab so fort id go for it.
i fort the kit looked crap at first,then jus got use to it.
bumper was to short so at to make bigger.
same with the arches.
only got this pic of the back bumper.it took time to cut out the bit were
the boot opens & then make good agen.lots of sanding & filling.loads more to still do.
took this pic when first put wheel spaces on.32mm & they are perfect.
im going to change the front bumper cuz it looks shit.
doesnt go with the kit.goin to get the cossy one agen.
then this is were my project came to a stand still for about 4 months
until i got offerd a 2.0 zetec for free.so could'nt refuse that.my mate had a 1.8 bottom end with all the parts to transfer over & that was free to
just needs wiring up now
put that in & thats it so far.really should pull my finger out & get it done.
would be nice to go ford fair in it.
then i got offerd a cossy kit for Ł150 on a escort cab so fort id go for it.
i fort the kit looked crap at first,then jus got use to it.
bumper was to short so at to make bigger.
same with the arches.
only got this pic of the back bumper.it took time to cut out the bit were
the boot opens & then make good agen.lots of sanding & filling.loads more to still do.
took this pic when first put wheel spaces on.32mm & they are perfect.
im going to change the front bumper cuz it looks shit.
doesnt go with the kit.goin to get the cossy one agen.
then this is were my project came to a stand still for about 4 months
until i got offerd a 2.0 zetec for free.so could'nt refuse that.my mate had a 1.8 bottom end with all the parts to transfer over & that was free to
just needs wiring up now
put that in & thats it so far.really should pull my finger out & get it done.
would be nice to go ford fair in it.
#21
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
[quote="zetec turbo mk4"]whats needed to get a zetec in a mk4 escort bud ?cheers lee.. [/quote
depends what engine size you goin 4?
the 1.8 is the best because it wil go straight to your standed gearbox not like the 2.0.
mines a 2.0 & i had to change the oil pick up pipe,sump,fly wheel,water pump which engine size you puting in?
depends what engine size you goin 4?
the 1.8 is the best because it wil go straight to your standed gearbox not like the 2.0.
mines a 2.0 & i had to change the oil pick up pipe,sump,fly wheel,water pump which engine size you puting in?
#23
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
Originally Posted by Lee1
Looking good with the kit on Have you got the cossie splitter to go on the front bumper?
goin to sel that delta first though.
#24
Originally Posted by combi van man
Originally Posted by Lee1
Looking good with the kit on Have you got the cossie splitter to go on the front bumper?
goin to sel that delta first though.
#25
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
Originally Posted by zetec turbo mk4
1800 130 lump cheers mines only a escort bonus tho so i will have to change lots more bits i suppose
but its well worth it
i had a escort cab sat on drive doing nothing though so i robbed most of the bits 4 my van & then put all van stuff on cab & sold it.
you want to get a 3i rolling shell or a turbo 1 it would be abit easier mate.
#26
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
just a litte update.got a better front bumper,
alot better than that crap delta one.
had to cut 70mm out the middle as its for the mk5 escort & they are abit wider,
i wanted this one as the mk4 escort cossie bumper is'nt very deep & this one is.
looks more like the real cossie bumper.
crap pic's as was taken on phone
desided to get rid of the badboy bonnet as it looked wank
just needs bonding together & i need to get a mk5 cossie grill.
fook nose when ill be doin it though,it prob get sold b4 it's finished.
alot better than that crap delta one.
had to cut 70mm out the middle as its for the mk5 escort & they are abit wider,
i wanted this one as the mk4 escort cossie bumper is'nt very deep & this one is.
looks more like the real cossie bumper.
crap pic's as was taken on phone
desided to get rid of the badboy bonnet as it looked wank
just needs bonding together & i need to get a mk5 cossie grill.
fook nose when ill be doin it though,it prob get sold b4 it's finished.
#32
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
yeah ive seen the yb 1 in fastford,have thought about it but my brother inlaw did that to his mk3 estate & said not to bother,have thought about rear engine but its the time it takes & dont have much of it
#33
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
dont know when it will be finished mate,would like to show it 1 day,would be cool driving to show's in a big line of combi's is the web site running yet as of when i heard of it last it wasnt runnig?
#36
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
#37
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Sep 2007
Posts: 998
Likes: 0
From: derby
yeah ill keep it mate.its cause i ant doin owt to it makes me think should i just fuck it off.every time i go in the garage i just use it as a shelf,its full of spare parts for all diff cars & the roof must be full of dints by nowmust get that crap of it & do somethin to it.
#38
yeah ill keep it mate.its cause i ant doin owt to it makes me think should i just fuck it off.every time i go in the garage i just use it as a shelf,its full of spare parts for all diff cars & the roof must be full of dints by nowmust get that crap of it & do somethin to it.