Area Six Jwrc Fiesta St Turbo ***FINISHED***
18-08-2007, 07:02 PM
#1
MADST.COM
Thread Starter
Join Date: Jul 2007
Location: manchester
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Area Six Jwrc Fiesta St Turbo ***FINISHED***
just noticed the old jwrc thread so i thought id post mine like.
i used to drive a fez mk3 K reg showcar and got pi$$ed off with m.o.t bills and repairing things every weekend so i decided to buy an 06 fiesta ST and start again.
2006 performace blue face lift-
ok,out come the seats -
on go some morette front lights-
rear black lexus (i know,but at least they arnt silver lol)
stereo out,in car computer with touch screen in-
(the background on the screen is how this car will look)
full fusion fab rollcage-
genuine m-sport wrc seats with TRS harness-
genuine m-sport wrc carbon door cards,carbon look m-sport rears not pictured-
genuine naked carbon JWRC spoiler. (cost a fookin fortune
)
it would be a crime to paint this ....
genuine JWRC carbon look roof scoops (need cutting out as you can see)
genuine JWRC bonnet (going to change the mesh to match the bumpers mesh i would of thought...
morrett wing mirror covers with indicators (the jwrc arches wipe out the side repeaters so i got these.may cover them in carbon look film to match spoiler/scoops?)
clear rear brake light (now i got this as it looked smart on the pic but im not liking it tbh,may tint it black or just smooth over the part where it sits?)
number boards for doors-
OK,ENGINE STUFF....
COSWORTH-one of my fav words !!! haha
OH DEAR-sad to look at :nope: .......for now
UPDATE
wheels have arrived,had to put the stickers on ourselves....fcukin Ł1600 and you have to D.I.Y hahaha
MORE ENGINE STUFF - these pics are 2 weeks old and its ready to start mapping.
REPLACED THE CLUTCH WITH A 6 PADDLE....
[img]https://i76.photobucket.com/albums/j13/fiestyRS/100_4010.jpg
[/img]
rear doorcards
and engine finished......
OK
took some pics while i was at the garage.
quality is horrible sorry,the camera on my fone is rubbish
basically here just checking that the wheels are wide enough with the hub convertors,and discovering that the waitec coilovers i bought,while look awsome on a standard fiesta ST once it was loward down,
dont go low enough at the back with the massive JWRC arches.
bummer,buying some gaz shocks to replace them
BIT WIDE HAHA-
BITS OF ARCHES CUT OFF-
some good quality pics,took a cam with us tonight...
a quick vid just to show car running...
will grab some more pics later when i go to garage
this is an old vid,theres more done to the car now.
the air filter is positioned right under the airscoop on the JWRC bonnet
ill try and get some vids up when im next with the car,prolly thursday when it hits the bodyshop.
other items,eg,reg plates,plastic windows all arrived and look awsome
BOUGHT BUT NOT FITTED-
plastic windows (these are unreal,they look amazing)
JWRC body kit (wide arches/bumpers/splitter)
coilovers
i used to drive a fez mk3 K reg showcar and got pi$$ed off with m.o.t bills and repairing things every weekend so i decided to buy an 06 fiesta ST and start again.
2006 performace blue face lift-
ok,out come the seats -
on go some morette front lights-
rear black lexus (i know,but at least they arnt silver lol)
stereo out,in car computer with touch screen in-
(the background on the screen is how this car will look)
full fusion fab rollcage-
genuine m-sport wrc seats with TRS harness-
genuine m-sport wrc carbon door cards,carbon look m-sport rears not pictured-
genuine naked carbon JWRC spoiler. (cost a fookin fortune
)it would be a crime to paint this ....
genuine JWRC carbon look roof scoops (need cutting out as you can see)
genuine JWRC bonnet (going to change the mesh to match the bumpers mesh i would of thought...
morrett wing mirror covers with indicators (the jwrc arches wipe out the side repeaters so i got these.may cover them in carbon look film to match spoiler/scoops?)
clear rear brake light (now i got this as it looked smart on the pic but im not liking it tbh,may tint it black or just smooth over the part where it sits?)
number boards for doors-
OK,ENGINE STUFF....
COSWORTH-one of my fav words !!! haha
OH DEAR-sad to look at :nope: .......for now
UPDATE
wheels have arrived,had to put the stickers on ourselves....fcukin Ł1600 and you have to D.I.Y hahaha
MORE ENGINE STUFF - these pics are 2 weeks old and its ready to start mapping.
REPLACED THE CLUTCH WITH A 6 PADDLE....
[img]https://i76.photobucket.com/albums/j13/fiestyRS/100_4010.jpg
[/img]
rear doorcards
and engine finished......
OK
took some pics while i was at the garage.
quality is horrible sorry,the camera on my fone is rubbish
basically here just checking that the wheels are wide enough with the hub convertors,and discovering that the waitec coilovers i bought,while look awsome on a standard fiesta ST once it was loward down,
dont go low enough at the back with the massive JWRC arches.
bummer,buying some gaz shocks to replace them
BIT WIDE HAHA-
BITS OF ARCHES CUT OFF-
some good quality pics,took a cam with us tonight...
a quick vid just to show car running...
will grab some more pics later when i go to garage
this is an old vid,theres more done to the car now.
the air filter is positioned right under the airscoop on the JWRC bonnet
ill try and get some vids up when im next with the car,prolly thursday when it hits the bodyshop.
other items,eg,reg plates,plastic windows all arrived and look awsome
BOUGHT BUT NOT FITTED-
plastic windows (these are unreal,they look amazing)
JWRC body kit (wide arches/bumpers/splitter)
coilovers
Last edited by fezSTturbo; 16-07-2010 at 05:56 PM. Reason: updated
18-08-2007, 07:08 PM
#2
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Will be awesome mate! Should look fantastic! 
Personally i'd lose the rear lights for the originals, also the pic of the car on the screen doesn't have the Morrette's on the front!
What you doing engine wise? Don't let it be all show and no go!
18-08-2007, 07:21 PM
#5
MADST.COM
Thread Starter
Join Date: Jul 2007
Location: manchester
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
yea ,my bad,should read
genuine jwrc carbon look scoops i spose.
Dan mate,the car on the incar pc background is the ford one,thats why it hasnt got my lights on lol.
genuine jwrc carbon look scoops i spose.
Dan mate,the car on the incar pc background is the ford one,thats why it hasnt got my lights on lol.
Trending Topics
18-08-2007, 08:43 PM
#8
20K+ Super Poster.
Join Date: Jun 2003
Location: Local, when i'm home...
Posts: 22,888
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fezSTturbo
Dan mate,the car on the incar pc background is the ford one,thats why it hasnt got my lights on lol.
Read the bit about Area 6 after I posted!
350bhp will be a monster in that little car! Nice one! 
20-08-2007, 07:43 PM
#13
MADST.COM
Thread Starter
Join Date: Jul 2007
Location: manchester
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ollie MK5 Turbo
I love the look of them JWRC Fiestas.
What Engine is Ian going to make for your car? Can you turbo what you have?
What Engine is Ian going to make for your car? Can you turbo what you have?
i was under the impression it hadnt been done before (turbo`ing the ST150) but a lad i was speaking to said it has.
never heard anything or saw anything in the mags,as thats were i got ians number,from an artical saying he was offering the conversion.
if you were interested im sure he will be up for it again as he hasnt (yet) hit any major probs with it...
21-08-2007, 06:18 PM
#15
MADST.COM
Thread Starter
Join Date: Jul 2007
Location: manchester
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PinkRinse
Looking good!! We wouldnt mind a post like this on our forum too!!!
27-08-2007, 03:43 PM
#27
MADST.COM
Thread Starter
Join Date: Jul 2007
Location: manchester
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rst in progress
are you saying ian howell does this conversion?
UPDATED POST WITH ENGINE STUFF
17-09-2007, 06:45 PM
#30
PassionFord Post Whore!!
Join Date: May 2003
Location: Lincoln & Scunny
Posts: 4,117
Likes: 0
Received 0 Likes
on
0 Posts
Very interesting project mate, If I was gonna be picky I'd have to say lose the show cage and get a proper one, but I suppose it's all down to what you intend doing with it...
What Suspension, Brakes are you using?
Those wheels... They are the fukkin bollox, where do they come from?
What Suspension, Brakes are you using?
Those wheels...
They are the fukkin bollox, where do they come from?
18-09-2007, 02:18 PM
#32
MADST.COM
Thread Starter
Join Date: Jul 2007
Location: manchester
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GTechR
Very interesting project mate, If I was gonna be picky I'd have to say lose the show cage and get a proper one, but I suppose it's all down to what you intend doing with it...
What Suspension, Brakes are you using?
Those wheels... They are the fukkin bollox, where do they come from?
What Suspension, Brakes are you using?
Those wheels...
They are the fukkin bollox, where do they come from?suspension is weitec coilovers,brakes,ive not got that far yet but they are gunna deff need uprating lol.
the wheels are really nice arnt they...there from japan and are made to order (with great difficulty with them speakin zero english haha)
i thought they would look kool on a rally slag and havnt seen them before.
