EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
21-01-2006, 08:11 PM
#1684
Advanced PassionFord User
Join Date: Mar 2005
Location: Wrong side of the road...
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
Dear Dave,
Is there anyway we can view those most recent photos at the correct size please ?
As they seem to have been re-sized by either Pf or photobucket.com....
Ta
Is there anyway we can view those most recent photos at the correct size please ?
As they seem to have been re-sized by either Pf or photobucket.com....
Ta
22-01-2006, 01:54 AM
#1685
Originally Posted by glenis
Dear Dave,
Is there anyway we can view those most recent photos at the correct size please ?
As they seem to have been re-sized by either Pf or photobucket.com....
Ta
Is there anyway we can view those most recent photos at the correct size please ?
As they seem to have been re-sized by either Pf or photobucket.com....
Ta
,i will have a look
24-01-2006, 07:37 AM
#1692
Thanks for all the comments Going to have a play with another 90 spec front bumper soon ,just want to tidy up a few bits on the front as mine has a couple of cracks in it .Will be keeping the same cutouts etc ,just smoothing them out more
28-01-2006, 11:32 PM
#1696
Originally Posted by luke89
Twins what colour is ur box ? and how did u paint it ? with a brush or some thing else ?? and were u get the paint from?
thanks
thanks
i just read all 43 pages of this thread and i must say that this must be some of the finest work i have ever seen on a car...
04-02-2006, 01:48 AM
#1707
Advanced PassionFord User
Join Date: May 2003
Location: Bristol / Solihull
Posts: 2,136
Likes: 0
Received 0 Likes
on
0 Posts
been through the whole thread the last 3 days 
Your work is truly inspiring mate!
It just shows how careful preperation makes so much difference to the final product.
Breathtaking car
Your work is truly inspiring mate!
It just shows how careful preperation makes so much difference to the final product.
Breathtaking car
04-02-2006, 06:21 PM
#1708
Thanks for all the comments Time for an update, made a start on the front bumper during the week ,mainly getting the foam out from the back and quickly chopped out the lower bar,so i can now start measuring ,cutting etc etc
Surprising how much this lot weighs
More progress soon
Time for an update, made a start on the front bumper during the week ,mainly getting the foam out from the back and quickly chopped out the lower bar,so i can now start measuring ,cutting etc etc Surprising how much this lot weighs
More progress soon
04-02-2006, 10:46 PM
#1711
PassionFord Post Troll
Join Date: Jun 2003
Location: Combe
Posts: 3,098
Likes: 0
Received 0 Likes
on
0 Posts
Off the head mate looks amazing some crazy hours have gone into that big respect for that 
I see you going for another bumper
Just wondering if your gonna sell that one on the car ?
I see you going for another bumper
Just wondering if your gonna sell that one on the car ?
05-02-2006, 10:05 AM
#1712
15K+ Super Poster!!
Join Date: May 2003
Location: Bucks
Posts: 17,976
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by puss
as far as i know adam its going to be the same as what dave already has because the one on the car has a couple of cracks
good work dave
good work dave
05-02-2006, 11:12 PM
#1717
Ok another update time ,spent some more time on the bumper today ,decided to do a couple of different things on this one .
Decieded that the very top bar is going on this one and the center bar will still be thinner but instead of dropping the top section i will raise the lower part .
Both pillers will stay and be smoothed out
Material removed to clear fans.
Starting to mark out the section to be removed in the bar
Section roughly removed
This is how it sits at the moment ,next stage is to cut the lower part out and move up and rebond.
Decieded that the very top bar is going on this one and the center bar will still be thinner but instead of dropping the top section i will raise the lower part .
Both pillers will stay and be smoothed out
Material removed to clear fans.
Starting to mark out the section to be removed in the bar
Section roughly removed
This is how it sits at the moment ,next stage is to cut the lower part out and move up and rebond.
