EDAN Escort S2 Turbo.Update,03/04/11 reverse charge carrier fitted
18-03-2011, 05:40 PM
#5166
I'm guessing that you'll be painting the 'reverse charge carrier' 
On autospecialists site I think it would be helpful if you could enlarge the picture of them fitting this kit to their S2 as I find it hard to visualise how it fits in the smaller pictures, just a thought. In relation to their standard single pass cooler this one looks HUGE.
Look forward to taking a look at this fitted to yours at central day. Bring it on! lol
On autospecialists site I think it would be helpful if you could enlarge the picture of them fitting this kit to their S2 as I find it hard to visualise how it fits in the smaller pictures, just a thought. In relation to their standard single pass cooler this one looks HUGE.
Look forward to taking a look at this fitted to yours at central day. Bring it on! lol
24-03-2011, 10:23 PM
#5176
Ok spent the last couple of afternoons fitting the new bits on 
Stripped off the old bits ,got a new exhaust gasket and some turbo water pipe washers,also changed the heat wrap to black.
Old unit off ,still perfectly good mind you
Manifold showing copper gasket
Old and new together
New one wrapped
Turbo nearly done
Got the cooler out next and fitted the fans
Very good instructions came with the kit,i sorted the relevent brackets out for the rad as it has to move across to accomadate the cooler
Old cooler with new
Cooler bolted up, rad and hoses to tighten up,i had my brackets done black as they come in a brushed silver effect
Air filter on in slightly new position
New elongated top water hose on,as rad is moved across
Just waiting on my reverse charge carrier as i have had the standard hole flushed as i run an act sensor in its place ,this will be done magic black when done ,also did my jubilee clips black that were replaced
Fans wired in
Just need to bleed system ,when pipe work come back
Stripped off the old bits ,got a new exhaust gasket and some turbo water pipe washers,also changed the heat wrap to black.
Old unit off ,still perfectly good mind you
Manifold showing copper gasket
Old and new together
New one wrapped
Turbo nearly done
Got the cooler out next and fitted the fans
Very good instructions came with the kit,i sorted the relevent brackets out for the rad as it has to move across to accomadate the cooler
Old cooler with new
Cooler bolted up, rad and hoses to tighten up,i had my brackets done black as they come in a brushed silver effect
Air filter on in slightly new position
New elongated top water hose on,as rad is moved across
Just waiting on my reverse charge carrier as i have had the standard hole flushed as i run an act sensor in its place ,this will be done magic black when done ,also did my jubilee clips black that were replaced
Fans wired in
Just need to bleed system ,when pipe work come back
Last edited by Twins; 29-03-2011 at 11:38 AM.
24-03-2011, 10:47 PM
#5179
I've found that life I needed.. It's HERE!!
the attention to detail is immense the little things like braided loom for the fans! i think im going to need the twins treatment to my s1! Just out of interest why the recent performance upgrades im sure the car does not see any hard use?
25-03-2011, 05:16 AM
#5180
Spanner monkey
Congrats on the new purchase
- Don't worry, i'm working on him to drop the compression and up the boost a tad, but he's worrys that the fly splats will be bigger and harder to clean off if he goes quicker
25-03-2011, 06:12 AM
#5181
Looks better and better mate.
How do you keep you front panel pristine looking?! Mine was new and painted but has battle scars from bumper removal/ cooler/ rad/ turbo refits etc etc lol
Stunning. Have to take it for a little drive once she's run up. Weathers set to hold out as it for a bit yet
How do you keep you front panel pristine looking?! Mine was new and painted but has battle scars from bumper removal/ cooler/ rad/ turbo refits etc etc lol
Stunning. Have to take it for a little drive once she's run up. Weathers set to hold out as it for a bit yet
25-03-2011, 07:57 AM
#5183
I've found that life I needed.. It's HERE!!
iTrader: (1)
Join Date: Sep 2005
Location: Nottingham
Posts: 1,116
Likes: 0
Received 0 Likes
on
0 Posts
Looking good mate
we will have to get some pics of the motors together at one of the shows this year like you was on about mate
we will have to get some pics of the motors together at one of the shows this year like you was on about mate
26-03-2011, 02:27 AM
#5186
I've found that life I needed.. It's HERE!!
hi gary how are you hope things are well? it was a bargain I even told dave he was selling it far too cheap! pm me your number mate!
