MY 205 GTI-6 Supercharged Track car
#1084
Lucifer II - 666
here is a badly film'd video of the 205
but you get the idea
bit of slow lauch at 4m20'ish but fairly impressive
http://www.youtube.com/watch?v=X14UggbNw5U
but you get the idea
bit of slow lauch at 4m20'ish but fairly impressive
http://www.youtube.com/watch?v=X14UggbNw5U
That looks rapid!!
#1091
Regular Contributor
Join Date: Jul 2008
Location: magor, south wales
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
#1096
*** Sierra RS Custard ***
iTrader: (3)
Fuck me dont they have google in basingstoke you ugly vest wearing cunt?
http://www.alloywheelsinternational....mentguide.html
205, 306, 309, 405, 406
4 x 108 pcd
offset 15-22mm
centre bore 65.0
BX, ZX, Xantia, Xsara, Saxo
4 x 108 pcd
offset 15-22mm
centre bore 65.0
Last edited by Chip; 02-02-2012 at 04:59 PM.
#1106
Professional Waffler
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
the car is taxed again now, so took it out for a little blast, definiatly sounds quieter now, so thats a good thing
afr gauge is looking a little lean to me , so not sure if its the gauge or the map as now it has a 2.5" exhaust
aft was looking around 12.9 from 5500 or onwards, below that it's 12.5
certainly picks up better and pulls well, stack dash now has a peak of 142 and was still pulling (private road test)
afr gauge is looking a little lean to me , so not sure if its the gauge or the map as now it has a 2.5" exhaust
aft was looking around 12.9 from 5500 or onwards, below that it's 12.5
certainly picks up better and pulls well, stack dash now has a peak of 142 and was still pulling (private road test)
#1107
Professional Waffler
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
selling my bullet camera setup, if anyone is interested
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=280838961320
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=280838961320
#1109
Professional Waffler
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
Tool the car ti combe last saturday for a sound test
At 4500 rev's it was 87dB....... Result
Oddly with the 3rd box on it was 88dB ar 4500
Was getting fed up of untidy dash , so put it back as it was before
Possibly get it all flocked later
The silver section at the bottom i will wrap soon
At 4500 rev's it was 87dB....... Result
Oddly with the 3rd box on it was 88dB ar 4500
Was getting fed up of untidy dash , so put it back as it was before
Possibly get it all flocked later
The silver section at the bottom i will wrap soon
#1112
Wahay!! I've lost my Virginity!!
Join Date: Mar 2012
Location: West midlands
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Love the car! You certainly get your use out of it too.
A lad I know has a 205 with gti 180 engine and that's now supercharged. He says it's VERY quick.
I may see you out at a trackday soon enough in my little 106..
Gotta love small pugs with a blower
A lad I know has a 205 with gti 180 engine and that's now supercharged. He says it's VERY quick.
I may see you out at a trackday soon enough in my little 106..
Gotta love small pugs with a blower
#1114
Wahay!! I've lost my Virginity!!
Join Date: Mar 2012
Location: West midlands
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Im using a few bits from his old supercharged s1 xsi in my 106.
Was the stack dash easy enough to wire up?
#1115
Professional Waffler
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
He was only on itb's last year so was a litter quicker than him , now he's be faster than mine
Stack was pretty easy, you just need to for vdo sensors ad that's it
Speedo sensor needs bracket made up and fuel tank needs calibrating
Stack was pretty easy, you just need to for vdo sensors ad that's it
Speedo sensor needs bracket made up and fuel tank needs calibrating
#1118
Professional Waffler
Thread Starter
iTrader: (1)
Join Date: May 2003
Location: Cardiff
Posts: 26,931
Likes: 0
Received 0 Likes
on
0 Posts
took the car to have it's front end setup
want to have neg 2 camber, and 30 degrees tow out and lots of castor
well camber we didnt need to alter as i got it pretty much spot on with my guess
tracking is well out...lol
using my new camber gauge,
passenger side
drivers side
also bought a glove box to tidy up the rest of the dash, need one fitting before i can it it
but here a preview
want to have neg 2 camber, and 30 degrees tow out and lots of castor
well camber we didnt need to alter as i got it pretty much spot on with my guess
tracking is well out...lol
using my new camber gauge,
passenger side
drivers side
also bought a glove box to tidy up the rest of the dash, need one fitting before i can it it
but here a preview