Restoration and tuning Escort Mk4 - 2013/05/12
#42
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
to Giro:
to Hobomassiv: I have 2 CVH engines on the garage but I hope that Zetec will be stronger and more powerfull. Throttle body in this zetec is from CVH 1,6 EFi. I think that its lighter then original and it really works
to Twins: It pleases that U like my car and mods. Look forward when It will be finished.
to Hobomassiv: I have 2 CVH engines on the garage but I hope that Zetec will be stronger and more powerfull. Throttle body in this zetec is from CVH 1,6 EFi. I think that its lighter then original and it really works
to Twins: It pleases that U like my car and mods. Look forward when It will be finished.
#45
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
to Tonyt1t: It's not about the money. I spent for this car only about 3500GBP now. I think that I'll spend about 6-7000 GBP. But I'm working on this car for 2,5 years - f**kin broke CVH. And my pay-off is same as Yours pocket money. Believe me. But We have cheaper parts then You.
To Diamonds: My first project was Skoda 120 V-Tec. It was crazy car from this:
to this:
It was my university project. But it finished only on paper (PC).
To Diamonds: My first project was Skoda 120 V-Tec. It was crazy car from this:
to this:
It was my university project. But it finished only on paper (PC).
#46
I've found that life I needed.. It's HERE!!
OMG
You sir are a nutter! Nice to see someone doing something different though!
Liking the arches too, I bet you'll get a major sense of achievement after that!
Keep it up!
You sir are a nutter! Nice to see someone doing something different though!
Liking the arches too, I bet you'll get a major sense of achievement after that!
Keep it up!
#48
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
to mentalasanything: Thanks for courtesy but I don't think that I'm a nutter. Maybe a lil bit
to Tony: Why? Your car is really nice without the arches too. And it's function. I'll have got a problems with cops with my car. Our officers R pretty stupid Every part must be with atest and bullsh*ts. F**k off.
to Tony: Why? Your car is really nice without the arches too. And it's function. I'll have got a problems with cops with my car. Our officers R pretty stupid Every part must be with atest and bullsh*ts. F**k off.
#52
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
to rigwrecker: Sorry.. It's a long way to finish it.
to series1rscar: Thanks.
to T28 RST: Thanks too. You have 18"? Wow.. And I thought that 17" R too big. Your dog is absolutely wonderfull.
to series1rscar: Thanks.
to T28 RST: Thanks too. You have 18"? Wow.. And I thought that 17" R too big. Your dog is absolutely wonderfull.
#53
Grey Mk4 Early XR3I
you know your design for the skoda above on the pc do you have one of how you want the escort to look? or a drawing ect? anything to show what your ainming for?
#54
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
to Tony: Sorry.. I haven't any pic or drawings how the finished car will be looking. I have it only in my head but I promise that I'll try to draw some schemes for next times. I want to keep the original Escort characteristics with the other lights, with hole in front bumper for iC and special aerodynamics part under the bumper with holes to acces an air for brakes, rear bumper similar as on Skoda but whit one exhaust end and towing lug.. Doors will be opened standardly to the side. I hope that the car will be symmetrical and the bumpers will have the same bottom shape as skirts. I'll show You next time.
#65
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
to fast ford uk: Thank You
to Tony: Sorry.. I prepared only right side door. Today Ill build left side and I have order for side skirts (crooked metal plate in my idea) Ill be fix it when Ill have all parts, I hope next week. I dont know which part Ill need to cut or adapt to other part. Im making this first time
to Tony: Sorry.. I prepared only right side door. Today Ill build left side and I have order for side skirts (crooked metal plate in my idea) Ill be fix it when Ill have all parts, I hope next week. I dont know which part Ill need to cut or adapt to other part. Im making this first time
#69
Grey Mk4 Early XR3I
Originally Posted by fast_ford_uk
what software/programmes do you use to make those pictures
#73
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tonyt1t
Originally Posted by fast_ford_uk
what software/programmes do you use to make those pictures
#77
Regular Contributor
Thread Starter
Join Date: Jan 2007
Location: Czech Republic
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Tony: I made the Skoda model for 3 months. Not every day and only few hours a day but Ill make a real car faster then this But Ill try it. First think I need is pictures of Esco (front, rear and side) as my Corel Skoda drawings. I never found this picture with dimensions. Maybe Ill try to use photos but it isnt good because it has distorted modality.