E5 MDS 4x4 saph re-build . . . for sale . . .
#321
PassionFord Post Troll
Thread Starter
spanking new rs500 thermostat housing. presume its an original one anyway loads bigger. anyone know why theuy made them bigger than normal? just need to get aeroquip fittings for it
#323
PassionFord Post Troll
Thread Starter
brakes arrived yesterday from crn products grooved diskd with red stuff pads. from what i can see theyre just normal disks that theyve had machined but at the price i paid its perfect as the pads alone would normally be Ł120/130
and just a quick insite into something im doing . . . more pics when the cam cover comes back from machining!
and just a quick insite into something im doing . . . more pics when the cam cover comes back from machining!
#324
PassionFord Post Troll
Thread Starter
went down garage for half an hour, first time in a while lol
2wd manifold just need to braze a pipe on for ext wastegate
put brakes on think im gona paint the disks so they dont rust and fitted the rear beam shims of mike rainbird
bit o quip!!
2wd manifold just need to braze a pipe on for ext wastegate
put brakes on think im gona paint the disks so they dont rust and fitted the rear beam shims of mike rainbird
bit o quip!!
#326
PassionFord Post Troll
Thread Starter
lol good luck the place is like forte knox!! if you get past the specially trained 'bite people called andy' guard dogs!! haha
#328
PassionFord Post Troll
Thread Starter
prepped and painted cam cover (again) just need to flat paint of high spots and polish then laquer. you get the idea with the coils and you can see where theyve been machined down, i think the coils look pretty factory, a good fit!!
#333
PassionFord Post Troll
Thread Starter
strut top strengthening plates and diff plate, what i thought were proper bits, laser cut etc i got these of ebay of george-flow they only took a month and a half to arrive too anyway will paint the plate tomo and see if my quaife front diff is really a quaife!lol
#335
PassionFord Post Troll
Thread Starter
the magic word!!
not sure weather to put a 3.9 in it??
and because in using a 2wd manifold now the actuator bracket that was welded on wasnt needed cos il just use a bolt on one and they look ugly with two!! (took me fuck*n ages to even cut this off with air saw!!)
start
all ground up
and polished. not the best but will do for now til new turbo
not sure weather to put a 3.9 in it??
and because in using a 2wd manifold now the actuator bracket that was welded on wasnt needed cos il just use a bolt on one and they look ugly with two!! (took me fuck*n ages to even cut this off with air saw!!)
start
all ground up
and polished. not the best but will do for now til new turbo
#338
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NEEDFORSPEED
not sure weather to put a 3.9 in it??
I could get a few of those strengthener plates knocked up for not much money.
#339
PassionFord Post Troll
Thread Starter
thanks guys! could be much better but running out of patience now and changeing turbo anyway at some point.
lord if you actually do want any help im there mate honestly . . . . as long as i dont get dirty and you make bru's!! also ive never been to the mantion what you up to today?
lord if you actually do want any help im there mate honestly . . . . as long as i dont get dirty and you make bru's!! also ive never been to the mantion what you up to today?
#340
PassionFord Post Troll
Thread Starter
Originally Posted by DazC
Originally Posted by NEEDFORSPEED
not sure weather to put a 3.9 in it??
I could get a few of those strengthener plates knocked up for not much money.
#345
PassionFord Post Troll
Thread Starter
cheers mateye not far off. shells not done yet but thats the last thing anyway, want to get front end built up (steering rack bottom arms engine box etc) so when shell comes back i can just bolt it up and get it on its wheels. will be together within the month i reckon once its back. and its timed up lee!
#349
Former Sponsor
Join Date: May 2003
Location: blackpool
Posts: 4,334
Likes: 0
Received 0 Likes
on
0 Posts
i fooking love it
cant wait to see it in the flesh
ive got a deal for you
do the same to my skyline, and ill do you a high spec turbo...
ill have to come and see what you ve done up to now...looks amazing
cant wait to see it in the flesh
ive got a deal for you
do the same to my skyline, and ill do you a high spec turbo...
ill have to come and see what you ve done up to now...looks amazing
#359
PassionFord Post Troll
Thread Starter
painted the rad n got some proper hose clips.
and collected a 3.9 rear diff to go with the new 3.9 mullet box/uprated 1st and centre vc im getting in a few wks! cheers shorty!!
stripped the diff to build the crown wheel and pinion into my quaife everything was tight as f**k so will be finishing that off tomo when ive got some air tools!