E5 MDS 4x4 saph re-build . . . for sale . . .
#161
PassionFord Post Troll
Thread Starter
i think this is the worst thing ive ever had to do in my life. finally finished all the sound deadning off n got all the sticky stuff off
bit wierd gettin the car outside in the sun again. well sun came out for a few mns all day lol, de greased everything and was sat underneath scrubbing as much underseal etc as i can off. its not come up too bad anyway.
this came today aswel, cos im putting the battery in the boot decided to use an amplifier distributor block to split the wires up instead of just soldering them up! got a little digital volts display aswel. not that youl see it behind the dash!!
jus waiting for my mate ste to come round and seam weld all turrets etc etc after ive got the seam sealer off
bit wierd gettin the car outside in the sun again. well sun came out for a few mns all day lol, de greased everything and was sat underneath scrubbing as much underseal etc as i can off. its not come up too bad anyway.
this came today aswel, cos im putting the battery in the boot decided to use an amplifier distributor block to split the wires up instead of just soldering them up! got a little digital volts display aswel. not that youl see it behind the dash!!
jus waiting for my mate ste to come round and seam weld all turrets etc etc after ive got the seam sealer off
#164
PassionFord Post Troll
Thread Starter
some pics from the trip . .
lewis thinkin hes the boy . .
anything to shut him up . .
lewis' lovely smile . .
and if you ever wake him up . . theres trouble!!
cheers for takeing me!
off loading
more to come soon!!
lewis thinkin hes the boy . .
anything to shut him up . .
lewis' lovely smile . .
and if you ever wake him up . . theres trouble!!
cheers for takeing me!
off loading
more to come soon!!
#169
PassionFord Post Troll
Thread Starter
doesnt look like it but got loads done today. got all the silicone nof the doors . . nightmare!! finished stripping everything off it and got front and rear windows and sunroof out, got most of the seam sealer off jus needs a bit more work before seam welding and my bro cut the tops of strut tops off cos it looked daft with just a hole sticking there! oh yeah and cut battery tray out.
#172
PassionFord Post Troll
Thread Starter
my brothers! yep decided but no one will know till its done lol!!
more cleaning up and the seam weldings nearly all done. i HATE SEAM SEALLER! its all ive been lookin at for the past day and a half!!
also started tidying up the water inj tank for the boot and strut braces which will be the same colour as car
more cleaning up and the seam weldings nearly all done. i HATE SEAM SEALLER! its all ive been lookin at for the past day and a half!!
also started tidying up the water inj tank for the boot and strut braces which will be the same colour as car
#175
PassionFord Post Troll
Thread Starter
thanks very much cossierich
my bros is absolute auto body care but theyre in gloucester mate! you got to travel for good jobs these days tho!!lol seeing some of their work at shows and front covers its worth it. (not just cos were related)
got lots done today, lots of little extra details to make it different at the shows but im not doin pics til its finished!!
my bros is absolute auto body care but theyre in gloucester mate! you got to travel for good jobs these days tho!!lol seeing some of their work at shows and front covers its worth it. (not just cos were related)
got lots done today, lots of little extra details to make it different at the shows but im not doin pics til its finished!!
#176
Regular Contributor
I can agree with that ill be taking my time choosing who to do my paint work in future!!!! Mark u need to txt me the colour u carnt make me wait!
Wont tell any1 i promise!!!
Wont tell any1 i promise!!!
#177
PassionFord Post Troll
Thread Starter
I can agree with that ill be taking my time choosing who to do my paint work in future!!!! Mark u need to txt me the colour u carnt make me wait!
Wont tell any1 i promise!!!
Wont tell any1 i promise!!!
#178
PassionFord Post Troll
Thread Starter
all im sayin without getting big headed is its going to look amazing. pauls going to be doing so much more work than i expected!
#180
PassionFord Post Troll
Thread Starter
dick head!! lol actually yeah!! not that stupid! more pics today finished about 9.10 underneath last night most sanded down jus needa a bit more at the back where there was no stonje chip. its solid as a rock only needed a 2x2' patch of welding on whole chassis!! who thinks we should ban lewis, hands up!
#185
PassionFord Post Troll
Thread Starter
listen here rite, il paint it what ever fuc*in colour i want. i happen to like yellow it makes me think of sunflowers in summer. tits you wnt know until its finished
#186
PassionFord Post Troll
Thread Starter
if only the mods knew what you two were sayin about passionford earlier it was horrendous. in fact it was that bad i dont even want to think about it. go back to skodaownersclub.com where you belong. in fact you dont even deserve that, there cars are quicker!!
#187
PassionFord Post Troll
Thread Starter
lol lewis is stil a virgin!!
few more pics,
my brothers antique in the corner, soon to be 500bhp concours. when mines done anyway lol hope it doesnt take as long as his 16i in the garage (9yrs) lol
pretty much done underneath jus a few little bits to go but the hard works done (dont i know it!!)
lots more to do inside but just prep work and its all clean
n got me a new dash spoiler and tailgate yesterday, thanks stretch!!
anyway im goin home tomo and wont see it til its finished (in yellow lol) cant wait!!!!!! and cant thank my vrother enough for all the hard work
few more pics,
my brothers antique in the corner, soon to be 500bhp concours. when mines done anyway lol hope it doesnt take as long as his 16i in the garage (9yrs) lol
pretty much done underneath jus a few little bits to go but the hard works done (dont i know it!!)
lots more to do inside but just prep work and its all clean
n got me a new dash spoiler and tailgate yesterday, thanks stretch!!
anyway im goin home tomo and wont see it til its finished (in yellow lol) cant wait!!!!!! and cant thank my vrother enough for all the hard work
#190
PassionFord Post Troll
Thread Starter
anyway the only reason i put that top on is because lewis promised if i did hed stop wearing his weekend wear around the garage . . but zak stil makes him wear it . .
my forums turning into one big gay joke!!
my forums turning into one big gay joke!!
#194
PassionFord Post Troll
Thread Starter
got a load more parts this wk, some mountune verniers, oil feed with filter, lots of aeroquip hose of ebay for water and breather and full brand new door strips door switches (another Ł350) etc etc from ford parts uk again top service
will get some pics up tomo n some pics of shell progress soon.
verniers on ebay for sale n check my other items.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MESE:IT&ih=007
will get some pics up tomo n some pics of shell progress soon.
verniers on ebay for sale n check my other items.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MESE:IT&ih=007
#196
PassionFord Post Troll
Thread Starter
few pics of the new verniers, prefer them cos theyre different but theyre flippin heavy n it all adds up!
got some leds for the dash too 1 to show when water inj is working, fan over ride, and alarm with metal bezels, used proper heat shrink for once look pretty neat!
lots of braided hose!
when using a plenum spacer the fuel rail wont fit what do pple normally do? thinkin of turning round the rail so the pressure reg is at the back, so the fuel pipes will be alot neater and then re make the brackets??
thaughts?!!
got some leds for the dash too 1 to show when water inj is working, fan over ride, and alarm with metal bezels, used proper heat shrink for once look pretty neat!
lots of braided hose!
when using a plenum spacer the fuel rail wont fit what do pple normally do? thinkin of turning round the rail so the pressure reg is at the back, so the fuel pipes will be alot neater and then re make the brackets??
thaughts?!!
#199
PassionFord Post Troll
Thread Starter