My 3door cosworth project.* UPDATE* BREAKING
#121
PassionFord Post Whore!!
iTrader: (8)
Join Date: May 2003
Location: side way some were in tayside
Posts: 5,061
Likes: 0
Received 0 Likes
on
0 Posts
Looking good ronnie,was out at mine today and fitted headlights and grill back on,dont think there's enough space to make a scoop that would look right,wish mines was as bling as yours,what you using for brakes mate
cheeRS stu
cheeRS stu
#122
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by STUCOS
Looking good ronnie,was out at mine today and fitted headlights and grill back on,dont think there's enough space to make a scoop that would look right,wish mines was as bling as yours,what you using for brakes mate
cheeRS Stu
cheeRS Stu
dont forget about my roll cage matey
#124
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lamb chops
Very nice Ron!! any reason why you didnt paint the turbo housing when you did the manifold?
#127
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lamb chops
Ah i see, was going to paint mine along with the manifold but if its will peel off I may not bother Keep up the good work
hopefully might have it running next week
getting excited now
also got another set of buckets so if anyone's interested in the recliner buckets let me know
#132
PassionFord Post Whore!!
iTrader: (1)
Join Date: Jun 2003
Location: Under the Missus ( . )( . )
Posts: 5,847
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RONNIE AMIS
[
as for the brakes got 330mm drilled and grooved fronts with brembo 4 pot's and 305mm drilled and grooved rear's with 4wd calipers
dont forget about my roll cage matey
as for the brakes got 330mm drilled and grooved fronts with brembo 4 pot's and 305mm drilled and grooved rear's with 4wd calipers
dont forget about my roll cage matey
#134
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 3drstretch
Originally Posted by RONNIE AMIS
[
as for the brakes got 330mm drilled and grooved fronts with brembo 4 pot's and 305mm drilled and grooved rear's with 4wd calipers
dont forget about my roll cage matey
as for the brakes got 330mm drilled and grooved fronts with brembo 4 pot's and 305mm drilled and grooved rear's with 4wd calipers
dont forget about my roll cage matey
#145
Advanced PassionFord User
Join Date: Oct 2004
Location: Essex
Posts: 1,636
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RONNIE AMIS
Originally Posted by lamb chops
Very nice Ron!! any reason why you didnt paint the turbo housing when you did the manifold?
On the subject of painting the Turbo Housing... Mine was painted before i bought the car 2 years ago and its nice n smooth) looks factory and hasn't pealed or flaked at all. not too sure which paint was used tho.
#149
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
aint had a chance to take many pic's lately been doing bits and bobs waiting for my tanks to come back from the powder coaters fit the exhaust then should be able to start it hopefully
one pic i fitted the oil cooler and remote oil filter had a couple of haters where i put the oil filter, tried mounting it on the inner wing but not enough space really,
will take my camera in next week and get some better pic's
let me know wot u think cheers
one pic i fitted the oil cooler and remote oil filter had a couple of haters where i put the oil filter, tried mounting it on the inner wing but not enough space really,
will take my camera in next week and get some better pic's
let me know wot u think cheers
#153
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by col cos1
looks great mate,well done,cant decide if i like the 1.6l headlights though,are you going to be running industion hose or something??
cheers was going to make some ducts to fill the gap's but i like it as it is, just going to make something up to cover the inside of the headlights, some people like them and some don't i suppose, will be putting the prop on and exhaust so will get some more pic's up
cheers for all the comments
#155
PassionFord Post Whore!!
iTrader: (8)
Join Date: May 2003
Location: side way some were in tayside
Posts: 5,061
Likes: 0
Received 0 Likes
on
0 Posts
Hi ronnie,was out looking at mine today,and there is no room for a duct with the base headlights and 500 cooler,so i am leaving mine blank,but think it will look ok as in going the scandinavian route and riveting my kit on
cheeRS stu
cheeRS stu
#156
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by STUCOS
Hi ronnie,was out looking at mine today,and there is no room for a duct with the base headlights and 500 cooler,so i am leaving mine blank,but think it will look ok as in going the scandinavian route and riveting my kit on
cheeRS Stu
cheeRS Stu
done some more bits tonite, no pic's though fitted the prop shaft, exhaust, alternator, power steering pipe's changed the oil re wired the plugs for the amal valve all to do now for it to fire up is wire the relay for the fuel pump and plug the ecu in, i'm scared now
got a call today to say my tanks and rear strut brace are ready to pick up from the powder coaters
#158
Regular Contributor
Join Date: Aug 2006
Location: Gloucestershire
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
Love this! I think you're right about the headlights - just needs a neat little trim made up to neaten up the edge of the headlights - i'm sure Twins could knock something up...
#159
PassionFord Post Whore!!
Thread Starter
iTrader: (17)
Join Date: May 2004
Posts: 5,618
Likes: 0
Received 0 Likes
on
0 Posts
fotted my tanks today, well happy with the way they came out the place only charged me 50 quid to do the header tank, breather tank, power steering tank, swirl pot and rear strut brace, thought that was pretty reasonable?
fitted the exhaust up
fitted everything on and fired the beast up fired up first time just got to reset the t,p,s on the secs moniter it says the throttle is 100% on idle? then when i press it down counts down then goes to 90% anyone know how i do it? well happy that it started though
fitted the exhaust up
fitted everything on and fired the beast up fired up first time just got to reset the t,p,s on the secs moniter it says the throttle is 100% on idle? then when i press it down counts down then goes to 90% anyone know how i do it? well happy that it started though