My Escort RST S2 on dyno
#1
PassionFord Regular
Thread Starter
Join Date: Apr 2004
Location: Denmark
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
My Escort RST S2 on dyno
Hi Guys & girls
I just thought that I would share the short video from this saturday, when my car hit the dyno. It was actually a bit of a better result then I expected. 176,1 Bhp and 265 nm - good enough for me
see the vid here; http://home.mach01.com/mach-video/Mach%20RST.wmv
don't be alarmed of the first run, the dyno guy did'nt adjust the dyno good enough for the first run.. I was begging for him to strap the car up, but he did'nt seem to care.. but no harm, he knew what he was doing
I just thought that I would share the short video from this saturday, when my car hit the dyno. It was actually a bit of a better result then I expected. 176,1 Bhp and 265 nm - good enough for me
see the vid here; http://home.mach01.com/mach-video/Mach%20RST.wmv
don't be alarmed of the first run, the dyno guy did'nt adjust the dyno good enough for the first run.. I was begging for him to strap the car up, but he did'nt seem to care.. but no harm, he knew what he was doing
#5
PassionFord Regular
Thread Starter
Join Date: Apr 2004
Location: Denmark
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
I KNOW!! - the dyno guy did'nt believe in strapping FWD cars, but yeah I had traces of evidence in my shorts after the first run... But he adjustet the dyno, and run 2 & 3 was'nt a problem, it kept steady on the dyno... I was still begging for him to strap it up
but thanks mates, I'm prette happy about the power and the sound... I'm looking forward to getting a complete stainless system on it, as it is now it's only the back box from 5ZIGEN that's stainless, but size and sound are awesome
but thanks mates, I'm prette happy about the power and the sound... I'm looking forward to getting a complete stainless system on it, as it is now it's only the back box from 5ZIGEN that's stainless, but size and sound are awesome
#7
I wouldnt have let him run the car without it being strapped down coz this happened to me
This happened about 2 years ago but it still makes me wonder what would have been the outcome if it happened on the road
The car was getting work done to it at AVA and when they were setting it up the tried a wee high speed run on the rollers to see what it was like top end, the car was totally strapped down front and at the back
Building up speed to 150mph everything fine until
BANG
The drivers front tyre blew out
It broke the bumper, damaged the wing, destroyed the tyre, ripped the side repeater and the RS badge clean off the wing, left trye marks all up the side of the car and there was even bits of tyre inside the car :
As you can see it totally ripped the tyre off the rim leaving just the 2 side walls behind, the tyre was perfect before hand with hardly any use at all.
Probably if this happened on the road i wouldnt be here writing this just now
Now think about it if that had of happened and the car wasnt strapped down
This happened about 2 years ago but it still makes me wonder what would have been the outcome if it happened on the road
The car was getting work done to it at AVA and when they were setting it up the tried a wee high speed run on the rollers to see what it was like top end, the car was totally strapped down front and at the back
Building up speed to 150mph everything fine until
BANG
The drivers front tyre blew out
It broke the bumper, damaged the wing, destroyed the tyre, ripped the side repeater and the RS badge clean off the wing, left trye marks all up the side of the car and there was even bits of tyre inside the car :
As you can see it totally ripped the tyre off the rim leaving just the 2 side walls behind, the tyre was perfect before hand with hardly any use at all.
Probably if this happened on the road i wouldnt be here writing this just now
Now think about it if that had of happened and the car wasnt strapped down
Trending Topics
#9
PassionFord Regular
Thread Starter
Join Date: Apr 2004
Location: Denmark
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Holy shhhh.... As I said is was'nt happy about it, but the guy said that he knew was he was doing, and we did'nt have any acidents all day (Dyno day with ford club denmark) so we live on to tell the tale but seeing your pictures I don't think that any guy would be alowed to do it with out straps in there future
#11
rich_bloor@hotmail.com
Join Date: Oct 2005
Location: Stoke-on-Trent
Posts: 2,243
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by T28 RST
I wouldnt have let him run the car without it being strapped down coz this happened to me
This happened about 2 years ago but it still makes me wonder what would have been the outcome if it happened on the road
The car was getting work done to it at AVA and when they were setting it up the tried a wee high speed run on the rollers to see what it was like top end, the car was totally strapped down front and at the back
Building up speed to 150mph everything fine until
BANG
The drivers front tyre blew out
It broke the bumper, damaged the wing, destroyed the tyre, ripped the side repeater and the RS badge clean off the wing, left trye marks all up the side of the car and there was even bits of tyre inside the car :
As you can see it totally ripped the tyre off the rim leaving just the 2 side walls behind, the tyre was perfect before hand with hardly any use at all.
Probably if this happened on the road i wouldnt be here writing this just now
Now think about it if that had of happened and the car wasnt strapped down
This happened about 2 years ago but it still makes me wonder what would have been the outcome if it happened on the road
The car was getting work done to it at AVA and when they were setting it up the tried a wee high speed run on the rollers to see what it was like top end, the car was totally strapped down front and at the back
Building up speed to 150mph everything fine until
BANG
The drivers front tyre blew out
It broke the bumper, damaged the wing, destroyed the tyre, ripped the side repeater and the RS badge clean off the wing, left trye marks all up the side of the car and there was even bits of tyre inside the car :
As you can see it totally ripped the tyre off the rim leaving just the 2 side walls behind, the tyre was perfect before hand with hardly any use at all.
Probably if this happened on the road i wouldnt be here writing this just now
Now think about it if that had of happened and the car wasnt strapped down
Could have happened at a track day though
Remember to keep the tyre ratings up on your cars guys. I always buy tyres that go higher than my cars top speed
#12
Wahay!! I've lost my Virginity!!
Join Date: Oct 2005
Location: germany near munich
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
next spring is my turbo to lines up. how much HP become I with the modifications reach? inlet Main polished, omp group of A exhaust, self made RAM air, starting from next xr3i inlet year rst loaders with cosworth exhaust gas side, run on 16psi
what means it?
what means it?
#14
Wahay!! I've lost my Virginity!!
Join Date: Oct 2005
Location: germany near munich
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
sorry i can´t english I write with a translation program.
I mean how much power are possible with this modofikationen,
inlet Main polished
omp group a exhaust
self made ram air
next jear starting with xr3i inlet main and rst loaders with cosworth exhaust gas side. run with 16psi
i hope you understand now
I mean how much power are possible with this modofikationen,
inlet Main polished
omp group a exhaust
self made ram air
next jear starting with xr3i inlet main and rst loaders with cosworth exhaust gas side. run with 16psi
i hope you understand now
#17
PassionFord Regular
Thread Starter
Join Date: Apr 2004
Location: Denmark
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
that's better, but probably not the right place to ask, but then again, there should be someone who could give you an estimate on your power, just not me, i would'nt know
and to all others, thank for your reply's and so on
and to all others, thank for your reply's and so on
#20
PassionFord Regular
Thread Starter
Join Date: Apr 2004
Location: Denmark
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
T28 RST; I don't think I am going back - def. not with out straps
NasRS - thanks mate, but yeah try standing beside your car when it does so - but I'm well happy with the figures, I guess it's enough power for me, untill next winther...
For now I'll focus on the styling etc. it needs a little love, before it's how I want it - I just ordered 3 new instruments for it, turbo boost, Oil pressure and Oil temp. And the project det next few months is to find some new seats, and get the rest of the interiour to match it, i've been thinking about these; http://www.raceland.dk/saeder/S_GTO.jpg - but with black and grey instead... and also when I'm doing the inside I'm going to put a little sound in it, even though the Forge dump is sounding pretty awesome, I still need a decent sound system...
For the ext. I bought new lights for it, I only need to buy the new rear lamps and side repeaters, I'm waiting for my frontsplitter project to arrive, and i've found 3 models of alloys that i'm waiting for prices on, so there's going to be some changes before summer
NasRS - thanks mate, but yeah try standing beside your car when it does so - but I'm well happy with the figures, I guess it's enough power for me, untill next winther...
For now I'll focus on the styling etc. it needs a little love, before it's how I want it - I just ordered 3 new instruments for it, turbo boost, Oil pressure and Oil temp. And the project det next few months is to find some new seats, and get the rest of the interiour to match it, i've been thinking about these; http://www.raceland.dk/saeder/S_GTO.jpg - but with black and grey instead... and also when I'm doing the inside I'm going to put a little sound in it, even though the Forge dump is sounding pretty awesome, I still need a decent sound system...
For the ext. I bought new lights for it, I only need to buy the new rear lamps and side repeaters, I'm waiting for my frontsplitter project to arrive, and i've found 3 models of alloys that i'm waiting for prices on, so there's going to be some changes before summer
Thread
Thread Starter
Forum
Replies
Last Post
JK12
Pictures, video & Photoshop Forum
33
26-04-2021 12:09 PM
Dr. Ickxs
Ford Escort RS Turbo
2
15-09-2015 10:15 PM