New project: 2wd Sapphire Cosworth
#41
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
New pictures about project: http://www.maxtuned.com/Pictures/Cos_Pro2/
Engine specs:
- new bearings
- new piston rings
- balanced
- blue printed
- high pressure oilpump
- ARP-head studs
- ARP-conrod bolts
- ported head (flows 212hp)
- new followers
- adjustable camshaft pulleys
- Cometic gaskets
- "RS500" cooler
- Haltech E6X
- Garrett GT37
- AMW dumpvalve
- AMW fuel regulator
- AMW wastgate
- MSD 500 cm3 injectors
- "WRC" plenum
- 70 mm throttle body
- 3 " stainless steel exhaust
- K&N airfilter
- Bosch 044 fuelpump
- Setrab oilcooler
- 10 mm / 8 mm fuellines
- BD10 cams
Transmission specs:
- Standard Gearbox (rebuild)
- Alcon 6-padle clutch
- Standard rearaxler
- Redline racing oil and lubricant
If some moderator read this. Could he/she move my topic to restorations, rebuilds and projects forum. Thanks
Engine specs:
- new bearings
- new piston rings
- balanced
- blue printed
- high pressure oilpump
- ARP-head studs
- ARP-conrod bolts
- ported head (flows 212hp)
- new followers
- adjustable camshaft pulleys
- Cometic gaskets
- "RS500" cooler
- Haltech E6X
- Garrett GT37
- AMW dumpvalve
- AMW fuel regulator
- AMW wastgate
- MSD 500 cm3 injectors
- "WRC" plenum
- 70 mm throttle body
- 3 " stainless steel exhaust
- K&N airfilter
- Bosch 044 fuelpump
- Setrab oilcooler
- 10 mm / 8 mm fuellines
- BD10 cams
Transmission specs:
- Standard Gearbox (rebuild)
- Alcon 6-padle clutch
- Standard rearaxler
- Redline racing oil and lubricant
If some moderator read this. Could he/she move my topic to restorations, rebuilds and projects forum. Thanks
#42
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
#45
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cozzie4d
Thats looking great mate, finally getting there..
any plans when you want to do the first engine start?
any plans when you want to do the first engine start?
Thanks mate. There is still quite much work to do. I think that the first engine start would be about after one month. When I get the car finished it goes straight to dynamometer.
#47
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cozzie4d
Sounds good, any idea of how much hp you want to get out of it?
#49
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Almost ready:
http://www.maxtuned.com/Cossu.jpg
I had problems with the electrics. There was several little faults, but now everything works.
http://www.maxtuned.com/Cossu.jpg
I had problems with the electrics. There was several little faults, but now everything works.
#51
Cossie restoration
It looks GREEEEAAAT! My saph 2wd is white like the first photo... I must get you a photo... I hope you´ll like it !
This is a RESTORATION!!! I try to restore mine, but this is another world!!!
#52
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cossie restoration
Originally Posted by Mendinen
It looks GREEEEAAAT! My saph 2wd is white like the first photo... I must get you a photo... I hope you´ll like it !
This is a RESTORATION!!! I try to restore mine, but this is another world!!!
Nice to hear that my project looks good. I love Cosworths so I am sure that your cossie looks really nice aswell.
#53
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
#55
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Aug 2004
Location: Finland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Now the car is ready.
New pictures about project in Maxtuneds homepage: http://www.maxtuned.com/Pictures/Cos_Pro2/index.htm
We measured 380 hp from backwheels with 1.3 bar. Something 420-430 hp and 460 Nm from engine.
New pictures about project in Maxtuneds homepage: http://www.maxtuned.com/Pictures/Cos_Pro2/index.htm
We measured 380 hp from backwheels with 1.3 bar. Something 420-430 hp and 460 Nm from engine.
#57
Advanced PassionFord User
Join Date: Nov 2005
Location: staffs
Posts: 2,234
Likes: 0
Received 0 Likes
on
0 Posts
from this standard flat pack shed...
http://www.maxtuned.com/Pictures/Cos_Pro2/1.htm
to this shed sucker...
http://www.maxtuned.com/Pictures/Cos_Pro2/279.htm
nice work bud,that engine looks mint.
http://www.maxtuned.com/Pictures/Cos_Pro2/1.htm
to this shed sucker...
http://www.maxtuned.com/Pictures/Cos_Pro2/279.htm
nice work bud,that engine looks mint.
Thread
Thread Starter
Forum
Replies
Last Post
Focosmitch
Ford RS Cosworth Parts for Sale
36
09-10-2015 07:38 PM