Jo

I don't think I've already posted some pics and specs about my car here, so here goes...

Ford Escort RS Cosworth '92 Luxury Edition

Factory Options
- Leather Seats

Engine
- Turbo: MD116 Modified T34 Compressor cover, compressor wheel and backplate , 360 degree ramped thrust bearing, modified backplate and bearing housing, left hand thread shaft wheel, twin racing “Hi Temp” piston rings, 0.63 A/R turbine housing.
- Samco Hoses Blue - Boost Set (Cold Side Dumpvalve Location) & Coolant Set
- Bailey Alloy Dumpvalve DV24
- Group A Induction Kit K&N
- Garrett -31 Actuator
- Alloy Battery Cover
- Magnex Stainless Steel Exhaust
- Champion Spark Plugs QC57C (not installed yet)
- Bosch Group A Uprated Fuel Pump
- 3 Bar Map Sensor (not installed yet)
- RaceTek WRC Intercooler
- Reconditioned Cam Cover (Colour Samco Blue)
- WRC 4-Layer Head Gasket

Exterior
- Bilstein Suspension & Eibach Lowering Springs
- 8x18" ET25 Speedline Corse GT1 with 225/35/18 Toyo Proxes TS1 tyres
- Nomad Racing Smoked Rear Clusters
- Nomad Racing Ultra White Front & Side Indicators

Interior
- Birba Racing White Dial Kit
- Pioneer 7400Mp
- Nomad Racing A-Pillar Pod With Sandtler Oiltemp Gauge

After 2 months of waiting for different parts to arrive all the stuff that has been lying in our living room is finally being put in, including an new RaceTek/AH Fabrications WRC Intercooler, oilbreather, WRC headgasket, ...




Can't wait for it to be finished!

This summer we're also coming over to England for our Stage 3 conversion as it was still standard (except for a fast road chip) when we bought it about a year ago.

GARETH T

wicked

BM08

lovely that is

agus RS

very nice

olivier54

turbinator

WRC headgasket

CossieRich

iTrader: (1)

Very nice

Disqaulifed driver

gangster beast!!

Jo

Edit....

Jo

Bought some new tyres, so I could finaly put my 18" wheels on





The new IC has also been installed...

saff_cossie

I like that a lot

Amazing even with new wheels what they do to the look of the car.

rs cos

very nice bud keep the pics coming

Jo

thanx for the replies

MikeR

Very nice car there mate you should be happy


Mike

cosworth3d

nice car and its even better in the flesh

alaskossie

Jo,

What mods did you have to do to get that nice intercooler to fit?

Tom Meacham
alaskossie
Anchorage, Alaska USA

CliffRS4

iTrader: (1)

Good to see RS's being modded in other countries
Nice car

Jo

I had to move the radiator a few centimeters backwards by moving the original mounting brackets backwards and welding them again.

Then I drilled some new holes for the IC and sqeezed it all in again.
It's a VERY thight fit, but it works

But if you have airco I don't think it will fit

MM_RACING

iTrader: (1)

Lovely

XR4Timan

A left-hooker... that makes me more envious...

convert the speedo to MPH....that way it's MOT-legal AND....

if you ever decide to sell it, it'll be more attractive to the USA crowd...

(although looking at how much effort you've put into it I doubt you'll ever wanna sell)

Jo

Probably not for the usual prices, but if I would get an exceptional offer, I'd consider it ...

Less.

Nice

Mike Rainbird

iTrader: (3)

Nice wheels, they would have looked better in gold !

Jo

Gold is for scooby's

skillicky

Pacifica blue is a gorgeous colour. I've got the same on my convertible. Looks sooooooooo nice in the sunshine

mybluechicken

very nice!!

D19 STE

Stunning motor mate

pagey

sweet, what more can you say

Speedy G.

iTrader: (1)

Absolutely lovely and even more in the flesh guyz.
You have to see this car and it's attention to detail to appreciate it even more.

Sticky.

iTrader: (4)

That looks really well mate love the wheels

Jo

Geert : cut the crap, YES you can come along to EA

but anyway, thanks for all those replies

CossieGirl

All of the bling bling stuff is installed
Carbon stuff arrived yesterday and if you ask me it looks great



Some other pictures...









Complete speclist...

Engine
- New Hybrid T34 Turbo Running 1.6Bar Peak Boost Pressure,holding 1.5 Bar (360° Trust Bearing, Cut Back Blades, .48 Exhaust Housing)
- Samco Hoses Blue - Boost Set (Cold Side Dumpvalve Location) & Coolant Set
- Bailey Alloy Dumpvalve DV24
- Group A Induction Kit K&N
- Garrett -31 Actuator
- Alloy Battery Cover
- Magnex Stainless Steel Exhaust
- Champion Spark Plugs QC59C
- Bosch Group A Uprated Fuel Pump
- Bosch '803' Green Fuel Injectors
- 3 Bar Map Sensor
- Engine Advantages Chip
- AH Fabrications WRC Intercooler
- Reconditioned Cam Cover (Colour Samco Blue)
- WRC 4-Layer Head Gasket
- Bailey Mirror Image Oilbreather with Samco Fittingkit
- Bailey Powersteering Tank
- Pro Alloy Headertank with Samco Fittingkit
- Pro Alloy Swirlpot
- Fusion Fabrications Brake Reservoir Cover & Cap
- Creative Carbon Turbo Heatshield
- Creative Carbon Cambelt Cover

Exterior
- "Cosworth" & "RS"-badges On The Side
- "RS"-Alloy Tire Valve Caps
- Bilstein Shocks & Eibach Lowering Springs
- Goodrigde braided brakeline hoses
- Foglight Grills (not installed yet)
- 8x18" ET25 Speedline Corse GT1
- 225/35/18 Toyo Proxes TS1
- Nomad Racing Half Smoked Rear Lights
- Nomad Racing Ultra White Front & Side Indicators

Interior
- Birba Racing White Dials Kit
- Sparco Pedals
- Sparco Gear Knob
- Pioneer 7400Mp
- Nomad Racing A-Pillar Pod With Sandtler Oiltemp Gauge
- RaceTech AFR meter

Rich@rd

Yep .. very wicked car m8 .. Ya commin' to Landgraaf 12 september ?? Maybe little track action ?

Looks seburb (spelling, I know )

Jo

yes , we are coming to Landgraaf as usual
not sure about the track action yet

Speedy G.

iTrader: (1)

Looks LOVELY m8.

fomoco90

oh man one big prob here


























THE STEERING WHEEL IS ON THE WRONG SIDE

ballin

iTrader: (1)

stunning mate good job!

Jo

why is that, I see you are Belgian too, so I suppose you have a lefthooker too

Jobbo

SO SO SO NICE

blacknlow

awesome...i want one