my upgraded van just,,,,
#3
Too many posts.. I need a life!!
Thread Starter
Join Date: Jun 2009
Location: kristinehamn/sweden
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
discs are focus st170 and calipers are mondeo -01 to -07 only needed to drill the holes up to 12mm that holds the caliper thats it
not sure yet if i'm changing hoses or try to find a way to use the stock escort ones,the banjo nipple screw is to long and bottoms out when thighten up before any seal is given, soo some investigation on that matter still, i'll post my soultion and parts used when done and if anyone have any helping tech info please share
i know there are drilled and slotted ones but not so easy over night here in sweden where fords are not soo appreciated among petrolheads
not sure yet if i'm changing hoses or try to find a way to use the stock escort ones,the banjo nipple screw is to long and bottoms out when thighten up before any seal is given, soo some investigation on that matter still, i'll post my soultion and parts used when done and if anyone have any helping tech info please share
i know there are drilled and slotted ones but not so easy over night here in sweden where fords are not soo appreciated among petrolheads
Thread
Thread Starter
Forum
Replies
Last Post