My mk5 zetec S
14-09-2010, 04:31 PM
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Sep 2010
Location: Devon
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
My mk5 zetec S
hi i only just joined this forum, i am normally on zsoc but i,ll thought i would give passion ford a go.lol
just thought i would post a pic of my ZS as it is now. alot of work has gone into it over the past year.
just thought i would post a pic of my ZS as it is now. alot of work has gone into it over the past year.
14-09-2010, 11:03 PM
#7
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Sep 2010
Location: Devon
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
the spec so far
Gmaz 40mm gas shocks and springs
Yokohama parada spec 2s
EBC front dics with EBC green stuff pads
EBC rear brake shoes
Goodridge stainless steal brake lines x4
OMP lower strut brace
Powerflex front anti roll bar bushes
Powerflex rear axle bushes
KnN panel filter with cold air feed
thats all so far. i rebuilt the engine with my dad last year and have only done 15000miles since rebuild.
hopefully next year i,ll have the money to mod the engine more
Gmaz 40mm gas shocks and springs
Yokohama parada spec 2s
EBC front dics with EBC green stuff pads
EBC rear brake shoes
Goodridge stainless steal brake lines x4
OMP lower strut brace
Powerflex front anti roll bar bushes
Powerflex rear axle bushes
KnN panel filter with cold air feed
thats all so far. i rebuilt the engine with my dad last year and have only done 15000miles since rebuild.
hopefully next year i,ll have the money to mod the engine more
Trending Topics
15-09-2010, 09:21 PM
#8
Too many posts.. I need a life!!
Join Date: Dec 2007
Location: Netherlands
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
Very nicee mate!!
Do you think the brakes are good for the car?
Or can i better buy some fiesta st 280mm brakes.
I lowered my zetec-s today with AP coilovers it drives much better!!
I have not done so far, only prada spec2 , k&n 57i kit, and now the coilovers!
Next wil be the brakes!!
Do you think the brakes are good for the car?
Or can i better buy some fiesta st 280mm brakes.
I lowered my zetec-s today with AP coilovers it drives much better!!
I have not done so far, only prada spec2 , k&n 57i kit, and now the coilovers!
Next wil be the brakes!!
Last edited by wess-rs; 15-09-2010 at 09:24 PM.
15-09-2010, 11:53 PM
#9
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Sep 2010
Location: Devon
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
there really good brakes. but 285m would be even better. when those dics die i,ll prob go for some 285ms i think.
mite paint my wheels now though. bored of grey ones.
mite paint my wheels now though. bored of grey ones.
16-09-2010, 10:55 AM
#12
ITB's... Loud and Proud
Join Date: Feb 2010
Location: ESSEX, wickford
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
Very tidy mate, love it to bits.. the imp blues look awesome with the side strips off and gloss black bump strips.. love the euro rear lights as well..
go for the 300mm brakes off the mondeo v6, just file down the calipers ever so slightly and they fit snug under the 15's....
makes me miss mine... i had a moondust one with an ST150 engine, on Titan ITBS, running 190bhp and 150lbfts..stripped out, over 200bhp per tonne. i miss it soo bad..
go for the 300mm brakes off the mondeo v6, just file down the calipers ever so slightly and they fit snug under the 15's....
makes me miss mine... i had a moondust one with an ST150 engine, on Titan ITBS, running 190bhp and 150lbfts..stripped out, over 200bhp per tonne. i miss it soo bad..
16-09-2010, 11:10 AM
#13
PassionFord Regular
16-09-2010, 07:25 PM
#16
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Sep 2010
Location: Devon
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Very tidy mate, love it to bits.. the imp blues look awesome with the side strips off and gloss black bump strips.. love the euro rear lights as well..
go for the 300mm brakes off the mondeo v6, just file down the calipers ever so slightly and they fit snug under the 15's....
makes me miss mine... i had a moondust one with an ST150 engine, on Titan ITBS, running 190bhp and 150lbfts..stripped out, over 200bhp per tonne. i miss it soo bad..
go for the 300mm brakes off the mondeo v6, just file down the calipers ever so slightly and they fit snug under the 15's....
makes me miss mine... i had a moondust one with an ST150 engine, on Titan ITBS, running 190bhp and 150lbfts..stripped out, over 200bhp per tonne. i miss it soo bad..
helped someone do that on a zs before but the calipers are still a little close to the wheels for my likeing. they did stop the car well though.
16-09-2010, 09:08 PM
#17
Too many posts.. I need a life!!
Join Date: Dec 2007
Location: Netherlands
Posts: 659
Likes: 0
Received 0 Likes
on
0 Posts
Very tidy mate, love it to bits.. the imp blues look awesome with the side strips off and gloss black bump strips.. love the euro rear lights as well..
go for the 300mm brakes off the mondeo v6, just file down the calipers ever so slightly and they fit snug under the 15's....
makes me miss mine... i had a moondust one with an ST150 engine, on Titan ITBS, running 190bhp and 150lbfts..stripped out, over 200bhp per tonne. i miss it soo bad..
go for the 300mm brakes off the mondeo v6, just file down the calipers ever so slightly and they fit snug under the 15's....
makes me miss mine... i had a moondust one with an ST150 engine, on Titan ITBS, running 190bhp and 150lbfts..stripped out, over 200bhp per tonne. i miss it soo bad..
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
SMILER258
Restorations, Rebuilds & Projects.
36
28-09-2015 09:04 AM
