Few pics of my car getting built by cossiecrazy
23-11-2009, 01:02 AM
#1
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
Few pics of my car getting built by cossiecrazy
i spent nearly 100 hrs taken it back to the bare metal if you go into my profile you will se what id one bfor Mark came...............stripped to fook
but i wanted it prfct
PICS AT THE BOTTOM NOW
SORRY PICS ARE NOT IN ORDER
MY COMP HAS FOOKED UP BUT YOU WILL GET AN IDEA:TOP
the car would have been ready for paint shop but someone gave me wrong stuff (could have bn a mistake) and i lost quite a few clips and nuts and bolts so had to constantly get stuff ordred from ford thats what took up the timebut the car is on 4 wheels full underside done as much new as possible
but i wanted it prfct PICS AT THE BOTTOM NOW
SORRY PICS ARE NOT IN ORDER
MY COMP HAS FOOKED UP BUT YOU WILL GET AN IDEA:TOPthe car would have been ready for paint shop but someone gave me wrong stuff (could have bn a mistake) and i lost quite a few clips and nuts and bolts so had to constantly get stuff ordred from ford thats what took up the timebut the car is on 4 wheels full underside done as much new as possible
Last edited by CRAIG HAYTER; 23-11-2009 at 02:02 AM.
23-11-2009, 01:22 AM
#4
PassionFord Post Whore!!
Click the IMG tags on the pics, then click the photo part next to the quote part to place them on thread.
Pics do look good, if they are not on tomorrow i'll link them, not got time tonight
Pics do look good, if they are not on tomorrow i'll link them, not got time tonight
Trending Topics
23-11-2009, 01:48 AM
#11
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
23-11-2009, 02:00 AM
#15
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
i spent nearly 100 hrs taken it back to the bare metal if you go into my profile you will se what id one bfor Mark came...............stripped to fookbut i wanted it perfect the stonechippd was thinned down and layrd on mor if that maks sense?
as for the spit i will ask him tommorow pm me your number and i will see what i can do
but i wanted it perfect the stonechippd was thinned down and layrd on mor if that maks sense?as for the spit i will ask him tommorow pm me your number and i will see what i can do
Last edited by CRAIG HAYTER; 23-11-2009 at 02:10 AM.
23-11-2009, 02:35 AM
#18
cool that means you got same bushes as me then as i got the ones mark recommends and when fitted it looks different to the old set up but same as yours. My old bushes are polybushes but ive taken them off due to the plank who build my car using two rear washers etc 
23-11-2009, 02:42 AM
#20
yeah he came round to sort out the antirollbar up front as where it goes on the TCA the thread was flush with bolt and i had 2 rear washers hence why the thread seemed too short!! Thought initially someone had cut off a bit of the thread on the ARB but it was just the extra washers!!
23-11-2009, 11:11 AM
#27
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
Less i look at it now and dont want to move itbut i wanted to prove a point that i could make this cleaner than my 3 door
also cheeRS for the comment guys
but i wanted to prove a point that i could make this cleaner than my 3 dooralso cheeRS for the comment guys
Last edited by CRAIG HAYTER; 23-11-2009 at 11:42 AM.
23-11-2009, 11:36 AM
#29
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
well lets hope soits had nearly every nut and bolt new (mostly from ford)and its getting painted inside,outside,top and the bottom is done now when i get a better camera you will see how clean i have got iti have renewe ALOT of new parts like engine,brake discs pad and calipers all round,lights,paint job,new wheels,new tyres,all wheels bearing,arms,bushes,samcos,feul lines (plastic)flexi's,also all new clips(genuine ford) and SO much more where do you stop when you do this?
its had nearly every nut and bolt new (mostly from ford)and its getting painted inside,outside,top and the bottom is done now when i get a better camera you will see how clean i have got iti have renewe ALOT of new parts like engine,brake discs pad and calipers all round,lights,paint job,new wheels,new tyres,all wheels bearing,arms,bushes,samcos,feul lines (plastic)flexi's,also all new clips(genuine ford) and SO much more where do you stop when you do this?
Last edited by CRAIG HAYTER; 23-11-2009 at 11:40 AM.
23-11-2009, 02:35 PM
#31
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
dont think i will use itcant wait to see it back from the paint shop
(goes there wed)cant wait to see it finished spent FAR too much on proving a point
cant wait to see it back from the paint shop(goes there wed)cant wait to see it finished spent FAR too much on proving a point
23-11-2009, 04:55 PM
#33
BANNED
BANNED
Thread Starter
Join Date: Sep 2007
Location: Far away from you so it doesnt matter
Posts: 4,370
Likes: 0
Received 0 Likes
on
0 Posts
Dave pm'd i dont want to think how much it has cost lets just say i sold a few nice cars and spent the lot on it and have about Ł130 left
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM