AndyRST

TT and I went to a 1/5 scale R/C car race meeting today to see and get an idea of 1/5 scale racing and how far Tony would need to develop his 1/5 scale Porsche GT2 for racing. The circuit is a purpose built track in kent.

There were around 30+ cars there and the day starts off with everyone being split into sessions of 5-6 cars on track and having a warm up a session and then setting a qualifing time. Then they are put into heats and then finals for their class. Each car has a transponder mounted onboard to accuratly record the lap time and number of laps (it can be very confusing as to who is leading the race, when lapping back markers )

Weather started off dry but a small rain shower soon had the cars driving very very slowly. These cars struggle to put any power down (even in a straight line) in the wet and plenty of sliding, fishtailing and spins to be seen

Then it dried out again and they were upto full speed again, i have to say i am stunned at how fast they can drive these cars, how well balanced and how good under brakes a proper 1/5 scale car is!

an excellent day out, and prob a very good hobbie to get into if your loaded with dosh Heres the pics :

One of the morning warm up sessions :











On the grid for race session:











Coppers, they think they own the road :

AndyRST

Just to give you all an idea how much better a 1/5 scale car is compaired to Nitro cars, just check Tony's Porsche against my Scooby :



the detail on TT's Porsche is amazing :

JBcos

is a proper RC monster that Porsche i feel the need for an upgrade from the Scooby i got lol

JBcos

oh and that track looks wicked and bigger than i'd expect

AndyRST

JB have you got a spare Ł1200 then?

TILLIO

Wow

Thoes rc cars look wicked!

But wheres that track???

Would love to tear round it on my mini moto

Spiky

iTrader: (1)

noooooooooooooooooo jb dooooooooooooooont, it means i have too

turbocab

would that happen to be in kent the track i was out with my fg marder this is were i get all my bits

http://www.gmmodels.co.uk/acatalog/

JBcos

Ł550 + body + Radio gear

http://www.rccarsandtrucks.co.uk/609_1_1139958.html

cossies4eva

i reckon my nitro rc car would stand a gd chance against them and it is only 1/10

turbocab

thats old model new ones are 23cc thats a budget one thay do diffrent speck

JBcos

budget aint what i'd call budget cant even fit in the fooker

AndyRST

FPMSL, thats the best quote i have heard

Sorry m8, but you wouldnt stand a chance against a pro 1/5 scale car, the size and weight of these cars make the braking and cornering of these cars is unbelieveable.

JB, that "ECO" is bottom of the range and would get absolutly slaughtered on track by a sports or compitition version. (p.s you will need to upgrade the brakes straight away to hydrolic front discs ( because on the ECO the standard ones dont work too well )

Spiky

iTrader: (1)

bet i could.....lol

EssexBoyRacer

Blimey tony that porche looks the nuts!

cossies4eva

my car is a schumacher xtr3e, it has a 3 spd gear box pushing it 2 a top speed just over 70mph, the shock r oil filled shock wiv pro shock bodies, it has carbon fibre shock towers front, it is 2wd, plus my brakes work gd enough considerd it stop it in bout 4-5 seconds frm 70mph, my car will do o-40mph in 1.5 seconds and it will cover 50 meter in 2.5 seconds frm a standing start and i think those r pretty good and will keep up with a 1/5th and and my car runs 2.1bhp (3.5cc) and has a power 2 weight ratio of 940 bhp per tonne

AndyRST

sorry but corner speed and stability

Benn basicly has what you have, but his wouldnt keep with a 1/5 scale race car on a track. You have a hell of a lot of power, tiny little wheel base that would pull wheelies all day long.

These FG 1/5 scale cars have a massive long wheel base, a ride height of 10-15 mm MAX!, ARB's front and rear, 4.5 - 5 bhp, Hydrolic front and rear disc & pad brakes (1 disc per wheel and proper working calipers) massive wide front and rear slicks with enough weight to push them into the track. These cars were designed to be the best on track and circuit racing

They will complete 30, 40, 50 laps without getting out of shape and produce consistant lap times without the worry of engines getting hot, running problems, stalling etc, that you ALWAYS get with nitro engines

cossies4eva

i think my tyres r bout 1.5-2 inches wide on back and front and if i get road tyres it will b even better, my engine has neva had ne stalling, running problems or gettin 2 hop it has always worked fine, and 4 sum reason my car will spin out at bout 5-10mph but neva at higher speeds like 30-70mph wen i corner, and the wheel base aint really that short it is quite big at sumfin like 300-350mm wheelbase

i no it wouldnt beat 1 round a track but it will still b a gd competitor against 1

cossies4eva

if i can b arsed 1 of the days i will make a movie of my car 4 u 2 show u how fast it can go

Adam_BlackRS

I'll race ya Tony or Andy with mine..........



Actually, i think i'll just drive over you two

AndyRST

PMSL @ Adam, to drive over someone you have to catch them 1st

Adam_BlackRS

With my 7.4cc engine and 4.6bhp.......i should catch them no worries

DaveEscos

is that track out towards folkstone and lydd?

some very nice driver roads out that way

turbocab

http://www.brooklandscircuit.co.uk/

Tony Turbo

Thanks for the comments about my car

It was a good day out, and gave me a good insight into what it would take to take my RC hobby to the next level. The car would need a fair bit of work doing to it to make it half as good as these all alloy and carbon light weight cars. Still, that's what credit cards are for

Yeah Dave, the track is out near Lydd kinda way from us

PMSL @ Adam - Your monster truck would be pants round a track. I still can't belive how much power it kicks out for such a small engine. I am hoping that once I finally decide on an exhaust system for mine, it should be around the 4.5 - 5bhp mark. Fancy a tarmac drag race?

JB - If you do decide to get one, don't buy an Ecoline model, get atleast a Sportsline, for Ł70 more, the extra kit is well worth it. However when I get another one, I will get a second hand Competetion chassis, already modded with Hydraulic brakes (Ł200 each end).


I do have a couple of MPEGS here, one is 13 meg and the other is 5 I think. If anyone wants to host it for a bit?

ballin

iTrader: (1)

looks wicked fun!
got a track near me where i sometimes take my 1/8th nitro but its not really designed for 1/8th and the whole time the car has the back end out even with 4x4, diff and disc brakes

undrivable but fookin good fun

pee vee

Wow, they are big!
i used to race 1/10 off road buggies but that was a
while ago! nothin like as fast as them 1/5 ones!!

Benn 304R

I will get mine on the road again soon lol
And this time TT we will have a drag race, providing I can keep mine in a straight line and without breaking anything

Tony Turbo

LOL - I am game for that. I will be getting mine back this weekend

andyhardy

Wow - I want to get one of those, the Savage upgrade kit?

http://www.modelsport.co.uk/?CallFun...n&ItemID=17896

Loads of video's of these being thrashed around on www.frequency-rc.com

Cheers,

Andy

AndyRST

3 way drag race, mine is up an running you know

Get the feeling TT's will beat mine now, and his is only 2wd

Just keeping yours on its wheels would be an achievement Benn

Benn 304R

Tony Turbo

PMSL @ Keeping it on it's wheels


I have ordered a few bits for mine today (no go faster bits though) and want to find out about getting the best exhaust pipe I can for it and want to order that 2morro.

My brake fluid won't be in until Thursday/ Friday, then I should get it back

Benn 304R

mongoose are good Tone, but could try ringing Tube tourqe and ask them to make ya one

My car needs some stabalisers

Tony Turbo

Mongoose

What you doing this weekend then?

AndyRST

PMSL, i could imagine the phone call now, "can i have a custom 62mm exhaust made please?"

You need more than stabalisers, you need wheels on the roof aswell!

Tony Turbo

Naaaaa, Benn just needs some FG wheels on so it can run upside down

Tony Turbo

UP for Benn

Benn 304R

working, working and working lol

havent got the bits for it yet anyway.

Tony Turbo

Bummer

Still give me more time to mod mine, not that I need it LOL


Are you going to the Kent Meet tonght?