CVH Roller rockers
#41
PassionFord Post Whore!!
cant find the link, pretty sure i found them in america last year so it wont be on my comp, cant fooking remember how i found em either, heres some i found on ebay back then though:
#42
PassionFord Post Whore!!
Originally Posted by xr-stu
cant find the link, pretty sure i found them in america last year so it wont be on my comp, cant fooking remember how i found em either, heres some i found on ebay back then though:
That doesn't look like a set of roller rockers, more like a set of lifters and a cam.
Jake
#47
PassionFord Post Whore!!
Originally Posted by Daviet
have the 1.8 cvh from a sierra not got them or i take it im talking utter shit
I have no interest in them- I dont even own an RST any more but from what I know these are fucking rare as fucking rare can be hence my comment about lepricorns... so for it to be that simple I'd be shocked. LOL
#51
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
I found these in the US... nothing for the CVH though!
http://www.harlandsharp.com/newproducts3.htm
http://www.fordracingparts.com/parts...%20/%20Springs
http://www.harlandsharp.com/newproducts3.htm
http://www.fordracingparts.com/parts...%20/%20Springs
#52
CUNT!
Join Date: Jun 2005
Location: BLUE PILL or RED PILL ... All I offer is the truth, nothing more, nothing less. You choose.
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
I`ll start having a proper look at whats involved with these as soon as a I get chance, from what I can see they shouldn't be too difficult but need to find out some specifics before I know for certain
#57
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by digita1dragon
Im sure I also read that in America there was a stock CVH that had roller rockers Either that or a set was available over there.
#59
Too many posts.. I need a life!!
Join Date: May 2004
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
A CVH roller rocker:
An expensive piece of kit, and currently unavailable. I was once willing to try to get another run sorted, but nobody showed any real interest...
An expensive piece of kit, and currently unavailable. I was once willing to try to get another run sorted, but nobody showed any real interest...
#60
I've found that life I needed.. It's HERE!!
iTrader: (2)
Join Date: May 2003
Location: the land of oz slough
Posts: 1,240
Likes: 0
Received 6 Likes
on
5 Posts
Originally Posted by ON-UJAH
A CVH roller rocker:
An expensive piece of kit, and currently unavailable. I was once willing to try to get another run sorted, but nobody showed any real interest...
An expensive piece of kit, and currently unavailable. I was once willing to try to get another run sorted, but nobody showed any real interest...
#63
PassionFord Post Whore!!
doubt theyd do much for cam wear, all the cam touches is the bottom of the lifters. if you fitted those roller lifters also, then youd vertually eliminate all wear!
#69
Too many posts.. I need a life!!
Join Date: May 2004
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
For a one set run they wanted 700 quid. I bought the last two rockers (not a full set) that they had lying about as spares and paid 35 quid each on them, without VAT.
Manufacturer is Titan Motorsport.
If people who are genuinely willing to pay the sort of prices mentioned PM me, I can contact Titan again about getting a few sets made up. Price range will *probably* be 500-700 depending on demand.
250 quid for a used set seams reasonable - remember there are no spares available!
Manufacturer is Titan Motorsport.
If people who are genuinely willing to pay the sort of prices mentioned PM me, I can contact Titan again about getting a few sets made up. Price range will *probably* be 500-700 depending on demand.
250 quid for a used set seams reasonable - remember there are no spares available!
#70
I've found that life I needed.. It's HERE!!
iTrader: (2)
Join Date: May 2003
Location: the land of oz slough
Posts: 1,240
Likes: 0
Received 6 Likes
on
5 Posts
Originally Posted by Shings
Your talking at least 300-400 quid I'd have thought.
However read the thread- they dont exsist.
Jake
However read the thread- they dont exsist.
Jake
#72
Too many posts.. I need a life!!
Join Date: May 2004
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
Right just post here if you are definitely interested, but please be honest, as it will be wasting everyones time if you say you are but then pull out later.
To make things easier, say up to what price you are prepared to pay.
Thanks!
To make things easier, say up to what price you are prepared to pay.
Thanks!
#73
PassionFord Post Whore!!
Join Date: May 2003
Location: Peterborough
Posts: 3,936
Likes: 0
Received 0 Likes
on
0 Posts
im not overly interested in building the ultimate cvh but if it helps on a group buy to get the price down - i'd buy a set for up to 150-175.
sounds weird as thats undoubtably much lower than they will actually cost, but if they become viable to manufacture at that then - i'm in
sounds weird as thats undoubtably much lower than they will actually cost, but if they become viable to manufacture at that then - i'm in
#76
PassionFord Regular
Join Date: Sep 2003
Location: Newcastle Upon Tyne
Posts: 422
Likes: 0
Received 0 Likes
on
0 Posts
i wouldnt mind a set if they become available, again not sure what i would pay for them would have to know for def the price b4 going ahead with a purchase
#78
Norris Motorsport
I am having 10 sets made. Price will be £320 a set if I was to retail them to general public. (£40 a rocker)
Who would be interested at that, as if people are I will consider making more and selling them to whoever.
One issue to bear in mind though is follower type. These rockers are for solid cam profiles only.
Speak up?
Who would be interested at that, as if people are I will consider making more and selling them to whoever.
One issue to bear in mind though is follower type. These rockers are for solid cam profiles only.
Speak up?
#79
10K+ Poster!!
iTrader: (1)
Join Date: May 2003
Location: Lancashire
Posts: 12,748
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Karl
I am having 10 sets made. Price will be £320 a set if I was to retail them to general public. (£40 a rocker)
Who would be interested at that, as if people are I will consider making more and selling them to whoever.
One issue to bear in mind though is follower type. These rockers are for solid cam profiles only.
Speak up?
Who would be interested at that, as if people are I will consider making more and selling them to whoever.
One issue to bear in mind though is follower type. These rockers are for solid cam profiles only.
Speak up?
By solid cam profiles, do you mean the rockers are designed for use with solid lifters with solid cam profiles??