P8 on coilpack managment? where from???
07-12-2005, 10:30 PM
#1
big floppy donkey dick
Thread Starter
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
P8 on coilpack managment? where from???
anyone know of a company who can sort out a P8/coilpack setup for a 2wd saff?
(after several phonecalls to Stu, he cannot supply the software so dont suggest it!)
i run my saff with P8/antilag ported head/cams/knife edge crank/ big turbo etc and am desparate for a coilpack sparked P8 pectel board or chip.
i couldnt give a flying fuk about the rev counter reading wrong.
any ideas guys?
i run a coilpack`d zetec mk3 escort and know all about the problems with the rev counters etc.........
escort pictured below,
cossie after that.......
(after several phonecalls to Stu, he cannot supply the software so dont suggest it!)
i run my saff with P8/antilag ported head/cams/knife edge crank/ big turbo etc and am desparate for a coilpack sparked P8 pectel board or chip.
i couldnt give a flying fuk about the rev counter reading wrong.
any ideas guys?
i run a coilpack`d zetec mk3 escort and know all about the problems with the rev counters etc.........
escort pictured below,
cossie after that.......
07-12-2005, 10:37 PM
#2
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Stu at MSD CAN supply an add on EXTRA board to do this that requires
NO software mods.
However, he will not have stock until next week and I think there is a small waiting list.
Best call him in the morning to discuss
NO software mods.
However, he will not have stock until next week and I think there is a small waiting list.
Best call him in the morning to discuss
07-12-2005, 10:42 PM
#4
big floppy donkey dick
Thread Starter
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
i gave up ringing as i was told he would not supply me with the software/ECU chip/whatever i needed about 3 month ago,
are you sure its P8 compatibale?
i`ll ring stu first thing tomorow if thats the case!!!!!!!!
only want to loose the dizzy due to new inlet i`ve had made, cant fit it in cos of stupid old fookin distributor
are you sure its P8 compatibale?
i`ll ring stu first thing tomorow if thats the case!!!!!!!!
only want to loose the dizzy due to new inlet i`ve had made, cant fit it in cos of stupid old fookin distributor
07-12-2005, 10:43 PM
#5
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
P8 can run Dizzyless with a pectel board as std!
why bother with these shonky unavailable aftermarket boards!?
get a pectel board and P8 will run dizzyless, als, wi, closed loop the lot!
why bother with these shonky unavailable aftermarket boards!?
get a pectel board and P8 will run dizzyless, als, wi, closed loop the lot!
07-12-2005, 10:48 PM
#6
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Cossie Sean,
You can run the add on board along side existing software/pectel boards without software mods.
Or as Davescoont said, you can get your existing pectel board software updated
but the people/tuners who can do this are limited.
You can run the add on board along side existing software/pectel boards without software mods.
Or as Davescoont said, you can get your existing pectel board software updated
but the people/tuners who can do this are limited.
Trending Topics
07-12-2005, 10:51 PM
#8
big floppy donkey dick
Thread Starter
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
Kev,
your right thats a bad kink in the downpipe, i had 20 mins to make an exhaust before the MOT!
heres the finished result, all mated to a standard cossie backbox.......
you may remember the car from performance ford december 2003 or 2004...........
your right thats a bad kink in the downpipe, i had 20 mins to make an exhaust before the MOT!
heres the finished result, all mated to a standard cossie backbox.......
you may remember the car from performance ford december 2003 or 2004...........
07-12-2005, 10:55 PM
#10
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
I bet the cost equals out when you add up the price of the untold un answered, unreturned phone calls and texts when something goes wrong! 
do it once, do it PROPERLY! with PROFFESIONALS!
do it once, do it PROPERLY! with PROFFESIONALS!
07-12-2005, 10:58 PM
#11
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
DaveEscos,
dont be a cnut for a change.
Stu is dealing will ALL sales enquiries/installtion etc... NOT me
Anyone who doubts Stus sales/proffesionalism is an idiot.
There are supply problems that are nearly resolved
dont be a cnut for a change.
Stu is dealing will ALL sales enquiries/installtion etc... NOT me
Anyone who doubts Stus sales/proffesionalism is an idiot.
There are supply problems that are nearly resolved
07-12-2005, 11:03 PM
#14
big floppy donkey dick
Thread Starter
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
now now people, i only asked a SIMPLE question and was told by STU HIMSELF that i could NOT purchase coilpack/P8 setup, i asked if i should keep in touch and was told not to bother, so i`m not!
i only wanna do away with the friggin dizzy!
if it comes down to it i`ll have to get a dizzy machined from ally to make it shorter, simple!
my ECU can run water inj, air-air, ALS and closed loop but not coilpack, thats all i want
i only wanna do away with the friggin dizzy!
if it comes down to it i`ll have to get a dizzy machined from ally to make it shorter, simple!
my ECU can run water inj, air-air, ALS and closed loop but not coilpack, thats all i want
07-12-2005, 11:06 PM
#16
BANNED
BANNED
iTrader: (1)
Join Date: Jul 2003
Location: Wiltshire
Posts: 12,483
Likes: 0
Received 0 Likes
on
0 Posts
Sean, give Stu a call in the morning, add your name to his list
and it can be done for you.
There have been manufacturing difficulties which has delayed sales
but these are nearly at completion.
Up to you, just giving you options.
and it can be done for you.
There have been manufacturing difficulties which has delayed sales
but these are nearly at completion.
Up to you, just giving you options.
07-12-2005, 11:09 PM
#18
big floppy donkey dick
Thread Starter
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
SECS
i have left my number since early this year and gave no running reports and was just told simply i couldnt buy one and that was that.
i`ll give it a few days to think about what to do,
thanks for the advice people
i have left my number since early this year and gave no running reports and was just told simply i couldnt buy one and that was that.
i`ll give it a few days to think about what to do,
thanks for the advice people
07-12-2005, 11:17 PM
#22
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
pectel dont make music, games or clothes..
what isnt there to like? their logo!?
either you've had bad service from them, bad goods etc...if you havent then there must be a reason?
mystifies me as its a bit like saying.. naaah, i wont shop at woodhouse for my clothes.. i'll go to george at asda instead!
i opted to run p8 with a issue 3 board, and a pectel loom.. does EVERYTHING spot on with no hassles. Its a known quantity!
what isnt there to like? their logo!?
either you've had bad service from them, bad goods etc...if you havent then there must be a reason?
mystifies me as its a bit like saying.. naaah, i wont shop at woodhouse for my clothes.. i'll go to george at asda instead!
i opted to run p8 with a issue 3 board, and a pectel loom.. does EVERYTHING spot on with no hassles. Its a known quantity!
07-12-2005, 11:22 PM
#25
big floppy donkey dick
Thread Starter
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
Dave
first off, i know a LOT of folk in the rally scene and i know of a fair few cossie folk reverting from pectel to origional marelli managment due to problems.
i thaught it was the same dave escos.........
same arrogant cheeky prick who used to use this and other sites.
i could do without your input, please dont bother leaving any more messages on my posts again.
you obviousley have a memory like a goldfish (that means a short memory dave)
first off, i know a LOT of folk in the rally scene and i know of a fair few cossie folk reverting from pectel to origional marelli managment due to problems.
i thaught it was the same dave escos.........
same arrogant cheeky prick who used to use this and other sites.
i could do without your input, please dont bother leaving any more messages on my posts again.
you obviousley have a memory like a goldfish (that means a short memory dave)
07-12-2005, 11:30 PM
#28
BANNED
BANNED
Join Date: May 2003
Location: Mongsville, wiping Jimbo.'s spastic arse.
Posts: 23,032
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Cossie Sean
i know a LOT of folk in the rally scene and i know of a fair few cossie folk reverting from pectel to origional marelli managment due to problems.
Hello Julian Godfrey???.. Hi its Dermot Carnegie, Pat Doran and John Tebenham here.. we're having trouble with our shonky T6 ECU's and would like to revert back to Weber L8 please!
08-12-2005, 06:22 AM
#33
I'm Finding My Feet Here Now
Join Date: Aug 2005
Location: derbyshire
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
a bit off topic here girls (joke! before i get shot down!)but does a zetec run on the old k-jectronic like in the first pic? id love to put a zetec in me S1 Xr3i to take away any 'old' engine probs (not saying they are shit but ive had two die already) id just like to take a different road than the cv/zvh route or turboing due to insurance costs. what version of a zetec is the one pictured? many thanx
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM
deathrider666
Technical help Q & A
3
28-09-2015 06:12 PM
