Show us your custom clocks in your dash please
#1
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2003
Posts: 4,449
Likes: 0
From: Hertfordshire
Show us your custom clocks in your dash please
Had my dash customised by Dave (Twins) and am feeling really guilty with putting the standard clocks back in so can you show me your custom clocks please to help me decide.
Cheers
Dave
Cheers
Dave
Trending Topics
#16
Thread Starter
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2003
Posts: 4,449
Likes: 0
From: Hertfordshire
Here's mine at the moment and as you can see that putting the standard clocks back in would be criminal
CosKev3,
I've got autometer gauges as you can see so that would be pretty much exactly what I am looking for
Where did you get them from and how much?
stuart collins,
Bloody hell Stuart I'm not going that radical
Porkie,
I really do like the Stack Tachometer but what's it like for reading the speed? Is it quite clearly visible? as Stack don't do a seperate speedo and rev counter
I'm quite liking this to go in where the clocks were. Anyone got them and can tell me whether they are worth it or not?
Cheers
Dave
CosKev3,
I've got autometer gauges as you can see so that would be pretty much exactly what I am looking for
Where did you get them from and how much?
stuart collins,
Bloody hell Stuart I'm not going that radical
Porkie,
I really do like the Stack Tachometer but what's it like for reading the speed? Is it quite clearly visible? as Stack don't do a seperate speedo and rev counter
I'm quite liking this to go in where the clocks were. Anyone got them and can tell me whether they are worth it or not?
Cheers
Dave
#17
dave they ARE the bollocks but also at a premium
tbh i think you should take back one of your gauges too as thats CLEARLY pointless, may as well have a hologram to read,,,,,,,, i trust you are aware of the gauge im refering too
tbh i think you should take back one of your gauges too as thats CLEARLY pointless, may as well have a hologram to read,,,,,,,, i trust you are aware of the gauge im refering too
#18
Borg Warner EFR Equipped!
Joined: Apr 2005
Posts: 5,810
Likes: 2
From: In the unit, building a 450bhp Time Attack Focus!
I haven't got any pics of it yet - but i'm using a few 'leftovers' from work to build a custom dash...
Basically its most of the stuff in an F1 steering wheel relocated and the chip reflashed...
Focus Digital Odometer/Trip Counter
Graphic Display showing temps and pressures with section to illuminate red and flash with problem location i.e 'Oil Pres' etc.
Left to right RPM increment LEDs, Blue up to 5000, then Yellow up to 6000 and Red up to 7500
Large Gear Indicator
Boost Gauage and AFR Gauge
And all of that is gettingmounted up in some lovely left over 2mm carbon sheet
Basically its most of the stuff in an F1 steering wheel relocated and the chip reflashed...
Focus Digital Odometer/Trip Counter
Graphic Display showing temps and pressures with section to illuminate red and flash with problem location i.e 'Oil Pres' etc.
Left to right RPM increment LEDs, Blue up to 5000, then Yellow up to 6000 and Red up to 7500
Large Gear Indicator
Boost Gauage and AFR Gauge
And all of that is gettingmounted up in some lovely left over 2mm carbon sheet
#25
I just went to Demon Tweeks. IIRC the Stack always uses your original fuel sensor? Had mine so it does fuel pressure too, but not Boost. Only went to Tweeks so I knew I would get the right one with spec I wanted, as yuo can have different colours, speed, rev counter, options etc...
Was about a grand, I can't remember exact amount
Took about 3 weeks to come. Not that easy to fit, was a lot of messing about, plus you need to put lights in your dash to replace indicators, headlights, engine management light etc....
Quality bit of kit though. You deffo get what you pay for! The sensors are top quality, infact it all is
Was about a grand, I can't remember exact amount
Took about 3 weeks to come. Not that easy to fit, was a lot of messing about, plus you need to put lights in your dash to replace indicators, headlights, engine management light etc....
Quality bit of kit though. You deffo get what you pay for! The sensors are top quality, infact it all is
#26
[quote="timrud"] you need to put lights in your dash to replace indicators, headlights, engine management light etc....
quote]
is this a legal requirement then? im building my dash now and didnt know if they was needed
quote]
is this a legal requirement then? im building my dash now and didnt know if they was needed
#33
pete you grumpy fooker i was having a laugh
for you infomation i am about to copyu rich pons install aswell !!!!!! as copying you custom mount idea hence why i was taking the piss
stop being soo uptight, not everyone is a hater in life
but the joke was based on the question asked and then what you posted, not about the actual set up
for you infomation i am about to copyu rich pons install aswell !!!!!! as copying you custom mount idea hence why i was taking the piss
stop being soo uptight, not everyone is a hater in life
but the joke was based on the question asked and then what you posted, not about the actual set up
#35
Originally Posted by Cliff S1
CosKev3,
I've got autometer gauges as you can see so that would be pretty much exactly what I am looking for
Where did you get them from and how much?
I've got autometer gauges as you can see so that would be pretty much exactly what I am looking for
Where did you get them from and how much?
Do a search on E-Bay,a lot of AutoMeter stuff on there cheap from the USA
#36
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2003
Posts: 5,847
Likes: 0
From: Under the Missus ( . )( . )
Originally Posted by All4it
Originally Posted by 3drstretch
Here's mine
#40
sure miker does them and also makes th dash i think with all the lights you require for mot.theres be a few posts about them before
cliff your dash looks shit hot already mate top work again by twins
cliff your dash looks shit hot already mate top work again by twins