What is it im MM?

Are where are these measurements taken from?

 

Varies mate , the std GpA ones for 355mm discs are 25mm , the one si have on my car are a lot thicker tho to stick the wheels out further , whats your problem then or are you collecting data ?
My rims back yet ??

 

Getting some bells made up, just wanted them a few mm deeper than standard AP 2wd offset, if you know what i mean.

Will check on the wheels now

 

up

 

up

 

if you find out i wouldn't mind knowing

 

oh come on people, someone must know

 

Ryan speak to Nightdavva, he's got a brand new set for sale and can measure them.

 

will pm him now.

Hopefully he wont mind having a measure.

Suprised non of the traders or gaybird has replied

 

IIRC the set I measured which were for a 330 kit on AP CP5200 4 pots were 30mm.....

 

Daz and idea where the measurements were taken from?

help much appreciated

 

Ryan......

Just measured mine......

From the face that sits on the hub flange to the face that the disc bolts on to = 17mm

From outside face(where wheel sits) to the face where the disc sits = 22mm

These were made for 330x28 AP discs with CP6600 calipers...

 

nightdivva your a fookin legend

 

CheeRS m8...

 

right looks like 30mm is the way to go to allow the clearence of my wheels with my fook off callipers.

cheers for all the info.

will post up pics of the completed setup in due coarse

 

ryan

you know the easy way..... your car is off the rd correct ?

take your wheel / hub/suspension leg/brakes to an engineering place and say to them can you make me a bell please and they will do it

your wasting your time asking people of offset on bells because everyones are different

i use a 356 mm x 36mm disc the bell i couldn't even tell you the thickness because they are sloped

even the p c d of the bolts will be different

some have floating/solid bells


why do things wrong way around ?

 

Im meeting the person this week, but wanted to give them a starting place.



cheers for the concern though Marco.

I have all the measurements from the disc manufacturer so there's no Issue there.

Was purely a offset starting place, im taking my discs, hubs, calliper to him this week and will have it all done

 

Ryan - I'm having some bells made at the moment. The deepest bell, with a few mm clearance to the steering arm, using a 32mm wide disc, is 24mm. 30mm will clash.(that's measuring from the hub face to the disc mounting face)

 

hmmm

cheers for the info, very valuable.

as mine are 32mm discs aswell.

you sure 24mm is the deepest offset?

 

yes jon is right as i worked it out for him with a hub n disc

 

cheers brom for confirming.



Its gonna be very close on my wheels then

Sure all will be fine

 

Yeah but you had to ask the Diva 1st

 

 

well done to all involed, you know who you are.

bells are now ready for machining

 

It was the weekend .

 

yeah sorry mike.

so how was "coming out" this weekend then

Any more new from havey? Or was our last msg a closer?

 

Its as i said then , 25mm ,all but 1 mm .lol , if you asked i have 2 sets of these surplus now !!

 

Ryan,
I thought I had given you all the info you asked for?

 

i think you have mate, just checking

like to keep you guessing.

bit like your sexuality

cheers again for the info

 

nice model

 

Says he the ex-ballet dancer .

 

Hope you remembered to include a chamfer for the central spigot

 

Glad you got sorted Ryan

I have just made myself some new ones for next season

 

yeah me too tony.

Here's what mine look like

 

hmmmm I'd go for the blue ones instead

 

obviously these are the proper ones

 

i like the pink ones PMSL