Hey all.

the actuator on my car needs re-set due to it popping off the wastegate of the turbo.

Rather than the old try/fail/adjust technique, id there any way i can set the preload on a -31(4x4 saf turbo/manifold etc) to around 16psi (on the safe side)

 

Set it at half a hole of pre-load and adjust the jetting in the amal valve until its running the correct boost pressure!

 

if it only popped off, would it need re-setting as they have lock nuts if i remember? if not, spadge has the answer!

 

sorted it, but how do u adjust the jetting in the amal valve???

 

yess as above