ive got a sensor and just wondered if theres anymore information anyone has on it

its a ford sensor

codes on sensor are :

PS 163151
3M5A-9C444
B 258 040 642/03
292121

Got a blue connector on the other end with 2 white wires, 1 grey wire and 1 black wire if that helps

Any information much appreciated

Scott

 

2 of the wires will be for the sensor part, the other 2 are for the heating aspect.

Apart from that I know nothing else about this particular HEGO

 

I think the grey goes to earth and black to the gauge but im not sure what gauges it can be used for or what to sell it as

Scott

 

BTTT

 

narrow band lambda sensors are all basically the same. the differences are only with/without heater, the thread size, and the wire length/colours and connector.

a universal one with heater can be had for about 15 quid brand new, so if you don't know any specifics on it, that's the most that you can hope to get for it imo

 

Got the part number read wrong somewhere mate ... sorry.

Black is signal
Grey is heater
2x whites are earths.