Fudgey

iTrader: (4)

i used the speaker mesh from the rear quarter plastics as i fitted 6x9s in the holes, just cut it to shape then siliconed it on

Gra

i used a trumpter for mine, I think i have to red Piper cross trumpets in my garage if you want i will ave a lookski foryou

however i know its gonna get shot down, but what about taking out the indicator bit next to the quad lights (might not be an inidactor as i seen some esc cos's with them blanked off, and assuming you dont use it that is ) and make a duct type thing out of fiberglass similar to the headlight ducts the RST boys use

or shall i get my coat,

Milko Pete

These are mine, I used base box ports, Jonm600 got the front bits and I used the back plastic bits as he said earlier.

The front 'chrome' bits where abit too gay for me!

Mike Rainbird

iTrader: (3)

Gra,
They're sidelights on the Escort, and the good thing is that the Morrette outer light has a facility to move the sidelights to this.

I actually like that idea a lot . I have a couple of spare ones, I'll see what can be done, as well as removing the inner lights .

Milky / John,
Could you take some photos from inside the engine bay?

Gra

COOOL i thought i would get shot down, if it works the charge for that idea will be a ride in the cossie

Milko Pete

Mike - My Esc is with a new owner now.

But you cant see much anyway, you need to split the morettes to fit the ports, then secure it, I jus made a little L shaped bracket, and self tapped it into the morette back plate, if you take one out and av a look, all will become clear.