management
Thread Starter
I'm Finding My Feet Here Now
Joined: Jul 2003
Posts: 137
Likes: 0
From: ON THE OTHER SIDE
decided to go after market management on my rst. i plan on having it done later this year when its rebuilt. im not going to do this myself has i havent got a clue. so can anyone recomend any tuners and management to go for .
plus a rough price
plus a rough price
Thread Starter
I'm Finding My Feet Here Now
Joined: Jul 2003
Posts: 137
Likes: 0
From: ON THE OTHER SIDE
the car will only be used for the road . heard of omex but is there any one who can supply and fit
gus i havent rolled a car so i cant be that good a driver
gus i havent rolled a car so i cant be that good a driver
15K+ Super Poster!!
iTrader: (35)
Joined: May 2003
Posts: 15,109
Likes: 0
From: Vimto Land Nr Warrington, Cheshire
Estimates usually start at around Ł1500 for fitted aftermarket mapable systems.
For road only cars any will do I guess so Omex, DTA, Autronic, Emerald etc etc should all be fine.
For road only cars any will do I guess so Omex, DTA, Autronic, Emerald etc etc should all be fine.
Trending Topics
Originally Posted by winston
the car will only be used for the road . heard of omex but is there any one who can supply and fit
01603 870 990
I'm running F.A.S.T on the race car now. Wideband, datalogging etc etc all for $2800CDN tuned.
I ran a Pectel T2 on my Focus and the F.A.S.T is far better for my level of tune + I can make changes if needed.
I ran a Pectel T2 on my Focus and the F.A.S.T is far better for my level of tune + I can make changes if needed.
Originally Posted by winston
the car will only be used for the road . heard of omex but is there any one who can supply and fit
gus i havent rolled a car so i cant be that good a driver
gus i havent rolled a car so i cant be that good a driver

question for u??????????
what do u get if u polish a turd?
remember beauty is only skin deep youll never have a cosworth 2 roll will u?
Thread Starter
I'm Finding My Feet Here Now
Joined: Jul 2003
Posts: 137
Likes: 0
From: ON THE OTHER SIDE
ranj m8 spec on engine should read somethig like
1600 cvh
low comp
lightened+balanced
wire rung block
heavy duty bearing kit
arp stud nut kit
st3 head
st3 turbo
something like that
1600 cvh
low comp
lightened+balanced
wire rung block
heavy duty bearing kit
arp stud nut kit
st3 head
st3 turbo
something like that
Originally Posted by winston
ranj m8 spec on engine should read somethig like
1600 cvh
low comp
lightened+balanced
wire rung block
heavy duty bearing kit
arp stud nut kit
st3 head
st3 turbo
something like that
1600 cvh
low comp
lightened+balanced
wire rung block
heavy duty bearing kit
arp stud nut kit
st3 head
st3 turbo
something like that

Originally Posted by INVADER
fookin ell gus give the guy a break


if you see in my pisstake etc i have answerd his questions!!!!!!!!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
Oct 17, 2021 10:09 AM
deathrider666
Technical help Q & A
3
Sep 28, 2015 06:12 PM



